Shofel payloader source & prebuild for jib with some old payloads i had made

these payloads may not work , i have no clue honestly i attached them ,
also there are 2 helper py scripts that might work with some of these
payloads

depricated payloads/source/pmic_wake.c

@@ -0,0 +1,41 @@
+#define GPIO_BASE 0x6000d000
+#define SCL_BIT (1 << 3)
+#define SDA_BIT (1 << 2)
+#define GPIO_P_OFFSET 0x400
+
+void delay() {
+  for (volatile int i = 0; i < 500; i++)
+    ;
+}
+
+void i2c_start() {
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x18) =
+      SDA_BIT; // SDA High
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x18) =
+      SCL_BIT; // SCL High
+  delay();
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x18) &=
+      ~SDA_BIT; // SDA Low
+  delay();
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x18) &=
+      ~SCL_BIT; // SCL Low
+}
+
+void _start() {
+  *(volatile unsigned int *)(0x60006010) |= (1 << 8);
+
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x10) =
+      (SCL_BIT | SDA_BIT);
+  *(volatile unsigned int *)(GPIO_BASE + GPIO_P_OFFSET + 0x14) =
+      (SCL_BIT | SDA_BIT);
+
+  i2c_start();
+
+  *(volatile unsigned int *)(GPIO_BASE + 0x500 + 0x14) = 0x01;
+
+  while (1) {
+    *(volatile unsigned int *)(GPIO_BASE + 0x500 + 0x18) ^= 0x01; // Toggle TX
+    for (volatile int i = 0; i < 10000; i++)
+      ;
+  }
+}