avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/include/mv88e6352.h

@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2012
+ * Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MV886352_H
+#define __MV886352_H
+
+#include <common.h>
+
+/* PHY registers */
+#define PHY(itf)	(itf)
+
+#define PHY_CTRL	0x00
+#define PHY_100_MBPS	0x2000
+#define PHY_1_GBPS	0x0040
+#define AUTONEG_EN	0x1000
+#define AUTONEG_RST	0x0200
+#define FULL_DUPLEX	0x0100
+#define PHY_PWR_DOWN	0x0800
+
+#define PHY_STATUS	0x01
+#define AN1000FIX	0x0001
+
+#define PHY_SPEC_CTRL	0x10
+#define SPEC_PWR_DOWN	0x0004
+#define AUTO_MDIX_EN	0x0060
+
+#define PHY_1000_CTRL	0x9
+
+#define NO_ADV		0x0000
+#define ADV_1000_FDPX	0x0200
+#define ADV_1000_HDPX	0x0100
+
+#define PHY_PAGE	0x16
+
+#define AN1000FIX_PAGE	0x00fc
+
+/* PORT or MAC registers */
+#define PORT(itf)	(itf+0x10)
+
+#define PORT_STATUS	0x00
+#define NO_PHY_DETECT	0x0000
+
+#define PORT_PHY	0x01
+#define RX_RGMII_TIM	0x8000
+#define TX_RGMII_TIM	0x4000
+#define FLOW_CTRL_EN	0x0080
+#define FLOW_CTRL_FOR	0x0040
+#define LINK_VAL	0x0020
+#define LINK_FOR	0x0010
+#define FULL_DPX	0x0008
+#define FULL_DPX_FOR	0x0004
+#define NO_SPEED_FOR	0x0003
+#define SPEED_1000_FOR	0x0002
+#define SPEED_100_FOR	0x0001
+#define SPEED_10_FOR	0x0000
+
+#define PORT_CTRL	0x04
+#define FORWARDING	0x0003
+#define EGRS_FLD_ALL	0x000c
+#define PORT_DIS	0x0000
+
+struct mv88e_sw_reg {
+	u8 port;
+	u8 reg;
+	u16 value;
+};
+
+int mv88e_sw_reset(const char *devname, u8 phy_addr);
+int mv88e_sw_program(const char *devname, u8 phy_addr,
+	struct mv88e_sw_reg *regs, int regs_nb);
+
+#endif