avionic design with actual uboot and tooling
submodule of avionic design uboot bootloader and with included tools to get you started , read readme.md and readme-tk1-loader.md
This commit is contained in:
74
u-boot/include/configs/o2d.h
Normal file
74
u-boot/include/configs/o2d.h
Normal file
@@ -0,0 +1,74 @@
|
||||
/*
|
||||
* (C) Copyright 2012
|
||||
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
||||
* 0xFC000000 boot low boot high (standard configuration)
|
||||
* 0x00100000 boot from RAM (for testing only)
|
||||
*/
|
||||
#ifndef CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
|
||||
#endif
|
||||
|
||||
/* Board specific flash config */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xfc000000
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
|
||||
/* max number of sectors on one chip */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
||||
|
||||
/*
|
||||
* Include common defines for all ifm boards
|
||||
*/
|
||||
#include "o2dnt-common.h"
|
||||
|
||||
/*
|
||||
* GPIO configuration:
|
||||
* CS1 SDRAM activate + no CAN + no PCI
|
||||
*/
|
||||
#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
|
||||
|
||||
/* Other board specific configs */
|
||||
#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
|
||||
|
||||
#define CONFIG_BOARD_NAME "o2d"
|
||||
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
|
||||
#define CONFIG_BOARD_MEM_LIMIT __stringify(126)
|
||||
#define BOARD_POST_CRC32_END __stringify(0x01000000)
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
|
||||
CONFIG_IFM_DEFAULT_ENV_OLD \
|
||||
CONFIG_IFM_DEFAULT_ENV_NEW \
|
||||
"linbot=fc060000\0" \
|
||||
"lintop=fc15ffff\0" \
|
||||
"rambot=fc160000\0" \
|
||||
"ramtop=fc55ffff\0" \
|
||||
"jffbot=fc560000\0" \
|
||||
"jfftop=fcffffff\0" \
|
||||
"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
|
||||
"ubotop=fc03ffff\0" \
|
||||
"kernel_addr=0xfc060000\0" \
|
||||
"ramdisk_addr=0xfc160000\0" \
|
||||
"progCram=tftp ${fileaddr} ${cramfsname};" \
|
||||
"erase ${rambot} ${ramtop};" \
|
||||
"cp.b ${fileaddr} ${rambot} ${filesize}\0" \
|
||||
"flash_for_configs=22396\0" \
|
||||
"flash_mtd=run mtd_args addip addmem;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"mtd_args=setenv bootargs root=/dev/mtdblock3 " \
|
||||
"rw rootfstype=cramfs\0" \
|
||||
"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
|
||||
"mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \
|
||||
"dhcp_boot=run dhcpcmd;run flash_mtd\0" \
|
||||
"hostname=IFM_SENSOR\0" \
|
||||
"netretry=once\0" \
|
||||
"autoload=no\0" \
|
||||
"sensorType=O2D222AG\0"
|
||||
Reference in New Issue
Block a user