avionic design with actual uboot and tooling
submodule of avionic design uboot bootloader and with included tools to get you started , read readme.md and readme-tk1-loader.md
This commit is contained in:
349
u-boot/include/configs/gr_cpci_ax2000.h
Normal file
349
u-boot/include/configs/gr_cpci_ax2000.h
Normal file
@@ -0,0 +1,349 @@
|
||||
/* Configuration header file for Gaisler GR-CPCI-AX2000
|
||||
* AX board. Note that since the AX is removable the configuration
|
||||
* for this board must be edited below.
|
||||
*
|
||||
* (C) Copyright 2003-2005
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* (C) Copyright 2008
|
||||
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H__
|
||||
#define __CONFIG_H__
|
||||
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_CPCI_AX2000 1 /* ... on GR-CPCI-AX2000 board */
|
||||
|
||||
#define CONFIG_LEON_RAM_SRAM 1
|
||||
#define CONFIG_LEON_RAM_SDRAM 2
|
||||
#define CONFIG_LEON_RAM_SDRAM_NOSRAM 3
|
||||
|
||||
/* Select Memory to run from
|
||||
*
|
||||
* SRAM - UBoot is run in SRAM, SRAM-0x40000000, SDRAM-0x60000000
|
||||
* SDRAM - UBoot is run in SDRAM, SRAM-0x40000000 and SDRAM-0x60000000
|
||||
* SDRAM_NOSRAM - UBoot is run in SDRAM, SRAM not available, SDRAM at 0x40000000
|
||||
*
|
||||
* Note, if Linux is to be used, SDRAM or SDRAM_NOSRAM is required since
|
||||
* it doesn't fit into the 4Mb SRAM.
|
||||
*
|
||||
* SRAM is default since it will work for all systems, however will not
|
||||
* be able to boot linux.
|
||||
*/
|
||||
#define CONFIG_LEON_RAM_SELECT CONFIG_LEON_RAM_SRAM
|
||||
|
||||
/* CPU / AMBA BUS configuration */
|
||||
#define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
||||
|
||||
/* Partitions */
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
|
||||
/*
|
||||
* Supported commands
|
||||
*/
|
||||
#define CONFIG_CMD_REGINFO
|
||||
#define CONFIG_CMD_DIAG
|
||||
#define CONFIG_CMD_IRQ
|
||||
|
||||
/*
|
||||
* Autobooting
|
||||
*/
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS_BASE \
|
||||
"netdev=eth0\0" \
|
||||
"nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"flash_nfs=run nfsargs addip;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"flash_self=run ramargs addip;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"getkernel=tftpboot $(scratch) $(bootfile)\0" \
|
||||
"bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0"
|
||||
|
||||
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
|
||||
"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
|
||||
"scratch=40200000\0" \
|
||||
""
|
||||
#elif CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
|
||||
"net_nfs=tftp 60000000 ${bootfile};run nfsargs addip;bootm\0" \
|
||||
"scratch=60800000\0" \
|
||||
""
|
||||
#else
|
||||
/* More than 4Mb is assumed when running from SDRAM */
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
|
||||
"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
|
||||
"scratch=40800000\0" \
|
||||
""
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_BASE CONFIG_EXTRA_ENV_SETTINGS_SELECT
|
||||
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
#define CONFIG_GATEWAYIP 192.168.0.1
|
||||
#define CONFIG_SERVERIP 192.168.0.20
|
||||
#define CONFIG_IPADDR 192.168.0.206
|
||||
#define CONFIG_ROOTPATH "/export/rootfs"
|
||||
#define CONFIG_HOSTNAME ax2000
|
||||
#define CONFIG_BOOTFILE "/uImage"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
/* Memory MAP
|
||||
*
|
||||
* Flash:
|
||||
* |--------------------------------|
|
||||
* | 0x00000000 Text & Data & BSS | *
|
||||
* | for Monitor | *
|
||||
* | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
|
||||
* | UNUSED / Growth | * 256kb
|
||||
* |--------------------------------|
|
||||
* | 0x00050000 Base custom area | *
|
||||
* | kernel / FS | *
|
||||
* | | * Rest of Flash
|
||||
* |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
|
||||
* | END-0x00008000 Environment | * 32kb
|
||||
* |--------------------------------|
|
||||
*
|
||||
*
|
||||
*
|
||||
* Main Memory (4Mb SRAM or XMb SDRAM):
|
||||
* |--------------------------------|
|
||||
* | UNUSED / scratch area |
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* | |
|
||||
* |--------------------------------|
|
||||
* | Monitor .Text / .DATA / .BSS | * 256kb
|
||||
* | Relocated! | *
|
||||
* |--------------------------------|
|
||||
* | Monitor Malloc | * 128kb (contains relocated environment)
|
||||
* |--------------------------------|
|
||||
* | Monitor/kernel STACK | * 64kb
|
||||
* |--------------------------------|
|
||||
* | Page Table for MMU systems | * 2k
|
||||
* |--------------------------------|
|
||||
* | PROM Code accessed from Linux | * 6kb-128b
|
||||
* |--------------------------------|
|
||||
* | Global data (avail from kernel)| * 128b
|
||||
* |--------------------------------|
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Flash configuration (8,16 or 32 MB)
|
||||
* TEXT base always at 0xFFF00000
|
||||
* ENV_ADDR always at 0xFFF40000
|
||||
* FLASH_BASE at 0xFC000000 for 64 MB
|
||||
* 0xFE000000 for 32 MB
|
||||
* 0xFF000000 for 16 MB
|
||||
* 0xFF800000 for 8 MB
|
||||
*/
|
||||
/*#define CONFIG_SYS_NO_FLASH 1*/
|
||||
#define CONFIG_SYS_FLASH_BASE 0x00000000
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000
|
||||
|
||||
#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
||||
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
||||
#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
|
||||
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
|
||||
|
||||
/*** CFI CONFIG ***/
|
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
/* Bypass cache when reading regs from flash memory */
|
||||
#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
|
||||
/* Buffered writes (32byte/go) instead of single accesses */
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
|
||||
/*
|
||||
* Environment settings
|
||||
*/
|
||||
/*#define CONFIG_ENV_IS_NOWHERE 1*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
/* CONFIG_ENV_ADDR need to be at sector boundary */
|
||||
#define CONFIG_ENV_SIZE 0x8000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_OVERWRITE 1
|
||||
|
||||
/*
|
||||
* Memory map
|
||||
*
|
||||
* Always 4Mb SRAM available
|
||||
* SDRAM module may be available on 0x60000000, SDRAM
|
||||
* is configured as if a 128Mb SDRAM module is available.
|
||||
*/
|
||||
|
||||
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
||||
#else
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x60000000
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
||||
#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
|
||||
|
||||
/* 4Mb SRAM available */
|
||||
#if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
|
||||
#define CONFIG_SYS_SRAM_BASE 0x40000000
|
||||
#define CONFIG_SYS_SRAM_SIZE 0x400000
|
||||
#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE)
|
||||
#endif
|
||||
|
||||
/* Select RAM used to run U-BOOT from... */
|
||||
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
|
||||
#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE
|
||||
#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE
|
||||
#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END
|
||||
#else
|
||||
#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
|
||||
#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
|
||||
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
# define CONFIG_SYS_RAMBOOT 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
|
||||
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
|
||||
|
||||
/* relocated monitor area */
|
||||
#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
|
||||
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
|
||||
|
||||
/* make un relocated address from relocated address */
|
||||
#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
|
||||
|
||||
/*
|
||||
* Ethernet configuration uses on board SMC91C111
|
||||
*/
|
||||
#define CONFIG_SMC91111 1
|
||||
#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
|
||||
#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
|
||||
#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
|
||||
/*#define CONFIG_SHOW_ACTIVITY*/
|
||||
#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
|
||||
|
||||
#define CONFIG_PHY_ADDR 0x00
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
|
||||
/*
|
||||
* Various low-level settings
|
||||
*/
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* USB stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_USB_CLOCK 0x0001BBBB
|
||||
#define CONFIG_USB_CONFIG 0x00005000
|
||||
|
||||
/***** Gaisler GRLIB IP-Cores Config ********/
|
||||
|
||||
#define CONFIG_SYS_GRLIB_SDRAM 0
|
||||
|
||||
/* No SDRAM Configuration */
|
||||
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
|
||||
|
||||
/* See, GRLIB Docs (grip.pdf) on how to set up
|
||||
* These the memory controller registers.
|
||||
*/
|
||||
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
|
||||
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
|
||||
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
|
||||
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
|
||||
#else
|
||||
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82205260
|
||||
#endif
|
||||
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x0809a000
|
||||
|
||||
/* GRLIB FT-MCTRL configuration */
|
||||
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
|
||||
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
|
||||
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
|
||||
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
|
||||
#else
|
||||
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82205260
|
||||
#endif
|
||||
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x0809a000
|
||||
|
||||
/* no DDR controller */
|
||||
#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
|
||||
|
||||
/* no DDR2 Controller */
|
||||
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
|
||||
|
||||
/* Identification string */
|
||||
#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-CPCI-AX2000"
|
||||
|
||||
/* default kernel command line */
|
||||
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Reference in New Issue
Block a user