avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/drivers/power/pmic/pmic_max8997.c

@@ -0,0 +1,107 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max8997_pmic.h>
+#include <i2c.h>
+#include <errno.h>
+
+unsigned char max8997_reg_ldo(int uV)
+{
+	unsigned char ret;
+	if (uV <= 800000)
+		return 0;
+	if (uV >= 3950000)
+		return MAX8997_LDO_MAX_VAL;
+	ret = (uV - 800000) / 50000;
+	if (ret > MAX8997_LDO_MAX_VAL) {
+		printf("MAX8997 LDO SETTING ERROR (%duV) -> %u\n", uV, ret);
+		ret = MAX8997_LDO_MAX_VAL;
+	}
+
+	return ret;
+}
+
+static int pmic_charger_state(struct pmic *p, int state, int current)
+{
+	unsigned char fc;
+	u32 val = 0;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (state == PMIC_CHARGER_DISABLE) {
+		puts("Disable the charger.\n");
+		pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
+		val &= ~(MBCHOSTEN | VCHGR_FC);
+		pmic_reg_write(p, MAX8997_REG_MBCCTRL2, val);
+
+		return -1;
+	}
+
+	if (current < CHARGER_MIN_CURRENT || current > CHARGER_MAX_CURRENT) {
+		printf("%s: Wrong charge current: %d [mA]\n",
+		       __func__, current);
+		return -1;
+	}
+
+	fc = (current - CHARGER_MIN_CURRENT) / CHARGER_CURRENT_RESOLUTION;
+	fc = fc & 0xf; /* up to 950 mA */
+
+	printf("Enable the charger @ %d [mA]\n", fc * CHARGER_CURRENT_RESOLUTION
+	       + CHARGER_MIN_CURRENT);
+
+	val = fc | MBCICHFCSET;
+	pmic_reg_write(p, MAX8997_REG_MBCCTRL4, val);
+
+	pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
+	val = MBCHOSTEN | VCHGR_FC; /* enable charger & fast charge */
+	pmic_reg_write(p, MAX8997_REG_MBCCTRL2, val);
+
+	return 0;
+}
+
+static int pmic_charger_bat_present(struct pmic *p)
+{
+	u32 val;
+
+	if (pmic_probe(p))
+		return -1;
+
+	pmic_reg_read(p, MAX8997_REG_STATUS4, &val);
+
+	return !(val & DETBAT);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+	.chrg_bat_present = pmic_charger_bat_present,
+	.chrg_state = pmic_charger_state,
+};
+
+int pmic_init(unsigned char bus)
+{
+	static const char name[] = "MAX8997_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board PMIC init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = PMIC_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX8997_I2C_ADDR;
+	p->hw.i2c.tx_num = 1;
+	p->bus = bus;
+
+	p->chrg = &power_chrg_pmic_ops;
+	return 0;
+}