avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/tqc/tqm834x/pci.c

@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/fsl_i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_region pci1_regions[] = {
+	{
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
+		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+	},
+	{
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
+		flags: PCI_REGION_IO
+	},
+	{
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
+		flags: PCI_REGION_MEM
+	},
+};
+
+/*
+ * pci_init_board()
+ *
+ * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since
+ * per TQM834x design physical connections to external devices (PCI sockets)
+ * are routed only to the PCI1 we do not account for the second one - this code
+ * supports PCI1 module only. Should support for the PCI2 be required in the
+ * future it needs a separate pci_controller structure (above) and handling -
+ * please refer to other boards' implementation for dual PCI host controllers,
+ * for example board/Marvell/db64360/pci.c, pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+	struct pci_region *reg[] = { pci1_regions };
+	u32 reg32;
+
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT
+	 *
+	 * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
+	 * line actually used for clocking all external PCI devices in TQM83xx.
+	 * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
+	 * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
+	 * are known to hang the board; this issue is under investigation
+	 * (13 oct 05)
+	 */
+	reg32 = OCCR_PCICOE1;
+#if 0
+	/* enabling all PCI_CLK_OUTPUT lines HANGS the board... */
+	reg32 = 0xff000000;
+#endif
+	if (clk->spmr & SPMR_CKID) {
+		/* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
+		 * fields accordingly */
+		reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
+
+		reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
+			  | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
+			  | OCCR_PCICD6 | OCCR_PCICD7);
+	}
+
+	clk->occr = reg32;
+	udelay(2000);
+
+	/* Configure PCI Local Access Windows */
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
+
+	udelay(2000);
+
+	mpc83xx_pci_init(1, reg);
+}