avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/tplink/wdr4300/Kconfig

@@ -0,0 +1,30 @@
+if BOARD_TPLINK_WDR4300
+
+config SYS_VENDOR
+	default "tplink"
+
+config SYS_SOC
+	default "ath79"
+
+config SYS_BOARD
+	default "wdr4300"
+
+config SYS_CONFIG_NAME
+	default "tplink_wdr4300"
+
+config SYS_TEXT_BASE
+	default 0xa1000000
+
+config SYS_DCACHE_SIZE
+	default 32768
+
+config SYS_DCACHE_LINE_SIZE
+	default 32
+
+config SYS_ICACHE_SIZE
+	default 65536
+
+config SYS_ICACHE_LINE_SIZE
+	default 32
+
+endif

u-boot/board/tplink/wdr4300/MAINTAINERS

@@ -0,0 +1,6 @@
+TPLINK_WDR4300 BOARD
+M:	Marek Vasut <marex@denx.de>
+S:	Maintained
+F:	board/tplink/wdr4300/
+F:	include/configs/tplink_wdr4300.h
+F:	configs/tplink_wdr4300_defconfig

u-boot/board/tplink/wdr4300/Makefile

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	= wdr4300.o

u-boot/board/tplink/wdr4300/wdr4300.c

@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ath79.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/ddr.h>
+#include <debug_uart.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_USB
+static void wdr4300_usb_start(void)
+{
+	void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
+					      AR71XX_GPIO_SIZE, MAP_NOCACHE);
+	if (!gpio_regs)
+		return;
+
+	/* Power up the USB HUB. */
+	clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22));
+	writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET);
+	mdelay(1);
+
+	ath79_usb_reset();
+}
+#else
+static inline void wdr4300_usb_start(void) {}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	void __iomem *regs;
+
+	regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+			   MAP_NOCACHE);
+
+	/* Assure JTAG is not disconnected. */
+	writel(0x40, regs + AR934X_GPIO_REG_FUNC);
+
+	/* Configure default GPIO input/output regs. */
+	writel(0x3031b, regs + AR71XX_GPIO_REG_OE);
+	writel(0x0f804, regs + AR71XX_GPIO_REG_OUT);
+
+	/* Configure pin multiplexing. */
+	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
+	writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1);
+	writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
+	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
+	writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4);
+	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
+
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	ar934x_pll_init(560, 480, 240);
+	ar934x_ddr_init(560, 480, 240);
+#endif
+
+	wdr4300_usb_start();
+	ath79_eth_reset();
+
+	return 0;
+}
+#endif