avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/st/stm32f429-discovery/Kconfig

@@ -0,0 +1,19 @@
+if TARGET_STM32F429_DISCOVERY
+
+config SYS_BOARD
+	string
+	default "stm32f429-discovery"
+
+config SYS_VENDOR
+	string
+	default "st"
+
+config SYS_SOC
+	string
+	default "stm32f4"
+
+config SYS_CONFIG_NAME
+	string
+	default "stm32f429-discovery"
+
+endif

u-boot/board/st/stm32f429-discovery/MAINTAINERS

@@ -0,0 +1,6 @@
+STM32F429-DISCOVERY BOARD
+M:	Kamil Lulko <kamil.lulko@gmail.com>
+S:	Maintained
+F:	board/st/stm32f429-discovery/
+F:	include/configs/stm32f429-discovery.h
+F:	configs/stm32f429-discovery_defconfig

u-boot/board/st/stm32f429-discovery/Makefile

@@ -0,0 +1,12 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2015
+# Kamil Lulko, <kamil.lulko@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= stm32f429-discovery.o
+obj-y	+= led.o

u-boot/board/st/stm32f429-discovery/led.c

@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/gpio.h>
+
+void coloured_LED_init(void)
+{
+	gpio_direction_output(CONFIG_RED_LED, 0);
+	gpio_direction_output(CONFIG_GREEN_LED, 0);
+}
+
+void red_led_off(void)
+{
+	gpio_set_value(CONFIG_RED_LED, 0);
+}
+
+void green_led_off(void)
+{
+	gpio_set_value(CONFIG_GREEN_LED, 0);
+}
+
+void red_led_on(void)
+{
+	gpio_set_value(CONFIG_RED_LED, 1);
+}
+
+void green_led_on(void)
+{
+	gpio_set_value(CONFIG_GREEN_LED, 1);
+}

u-boot/board/st/stm32f429-discovery/stm32f429-discovery.c

@@ -0,0 +1,328 @@
+/*
+ * (C) Copyright 2011, 2012, 2013
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
+ * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
+ * Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <kamil.lulko@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/fmc.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_stm32.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct stm32_gpio_ctl gpio_ctl_gpout = {
+	.mode = STM32_GPIO_MODE_OUT,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_NO,
+	.af = STM32_GPIO_AF0
+};
+
+const struct stm32_gpio_ctl gpio_ctl_usart = {
+	.mode = STM32_GPIO_MODE_AF,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_UP,
+	.af = STM32_GPIO_USART
+};
+
+static const struct stm32_gpio_dsc usart_gpio[] = {
+	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_TX},	/* TX */
+	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_RX},	/* RX */
+};
+
+int uart_setup_gpio(void)
+{
+	int i;
+	int rv = 0;
+
+	clock_setup(GPIO_A_CLOCK_CFG);
+	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
+		rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
+		if (rv)
+			goto out;
+	}
+
+out:
+	return rv;
+}
+
+const struct stm32_gpio_ctl gpio_ctl_fmc = {
+	.mode = STM32_GPIO_MODE_AF,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_100M,
+	.pupd = STM32_GPIO_PUPD_NO,
+	.af = STM32_GPIO_AF12
+};
+
+static const struct stm32_gpio_dsc ext_ram_fmc_gpio[] = {
+	/* Chip is LQFP144, see DM00077036.pdf for details */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_10},	/* 79, FMC_D15 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_9},	/* 78, FMC_D14 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_8},	/* 77, FMC_D13 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_15},	/* 68, FMC_D12 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_14},	/* 67, FMC_D11 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_13},	/* 66, FMC_D10 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_12},	/* 65, FMC_D9 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_11},	/* 64, FMC_D8 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_10},	/* 63, FMC_D7 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_9},	/* 60, FMC_D6 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_8},	/* 59, FMC_D5 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_7},	/* 58, FMC_D4 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_1},	/* 115, FMC_D3 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_0},	/* 114, FMC_D2 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_15},	/* 86, FMC_D1 */
+	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_14},	/* 85, FMC_D0 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_1},	/* 142, FMC_NBL1 */
+	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_0},	/* 141, FMC_NBL0 */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_5},	/* 90, FMC_A15, BA1 */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_4},	/* 89, FMC_A14, BA0 */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_1},	/* 57, FMC_A11 */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_0},	/* 56, FMC_A10 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_15},	/* 55, FMC_A9 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_14},	/* 54, FMC_A8 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_13},	/* 53, FMC_A7 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_12},	/* 50, FMC_A6 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_5},	/* 15, FMC_A5 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_4},	/* 14, FMC_A4 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_3},	/* 13, FMC_A3 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_2},	/* 12, FMC_A2 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_1},	/* 11, FMC_A1 */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_0},	/* 10, FMC_A0 */
+	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_6},	/* 136, SDRAM_NE */
+	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_11},	/* 49, SDRAM_NRAS */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_15},	/* 132, SDRAM_NCAS */
+	{STM32_GPIO_PORT_C, STM32_GPIO_PIN_0},	/* 26, SDRAM_NWE */
+	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_5},	/* 135, SDRAM_CKE */
+	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_8},	/* 93, SDRAM_CLK */
+};
+
+static int fmc_setup_gpio(void)
+{
+	int rv = 0;
+	int i;
+
+	clock_setup(GPIO_B_CLOCK_CFG);
+	clock_setup(GPIO_C_CLOCK_CFG);
+	clock_setup(GPIO_D_CLOCK_CFG);
+	clock_setup(GPIO_E_CLOCK_CFG);
+	clock_setup(GPIO_F_CLOCK_CFG);
+	clock_setup(GPIO_G_CLOCK_CFG);
+
+	for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) {
+		rv = stm32_gpio_config(&ext_ram_fmc_gpio[i],
+				&gpio_ctl_fmc);
+		if (rv)
+			goto out;
+	}
+
+out:
+	return rv;
+}
+
+/*
+ * STM32 RCC FMC specific definitions
+ */
+#define STM32_RCC_ENR_FMC	(1 << 0)	/* FMC module clock  */
+
+static inline u32 _ns2clk(u32 ns, u32 freq)
+{
+	u32 tmp = freq/1000000;
+	return (tmp * ns) / 1000;
+}
+
+#define NS2CLK(ns) (_ns2clk(ns, freq))
+
+/*
+ * Following are timings for IS42S16400J, from corresponding datasheet
+ */
+#define SDRAM_CAS	3	/* 3 cycles */
+#define SDRAM_NB	1	/* Number of banks */
+#define SDRAM_MWID	1	/* 16 bit memory */
+
+#define SDRAM_NR	0x1	/* 12-bit row */
+#define SDRAM_NC	0x0	/* 8-bit col */
+#define SDRAM_RBURST	0x1	/* Single read requests always as bursts */
+#define SDRAM_RPIPE	0x0	/* No HCLK clock cycle delay */
+
+#define SDRAM_TRRD	(NS2CLK(14) - 1)
+#define SDRAM_TRCD	(NS2CLK(15) - 1)
+#define SDRAM_TRP	(NS2CLK(15) - 1)
+#define SDRAM_TRAS	(NS2CLK(42) - 1)
+#define SDRAM_TRC	(NS2CLK(63) - 1)
+#define SDRAM_TRFC	(NS2CLK(63) - 1)
+#define SDRAM_TCDL	(1 - 1)
+#define SDRAM_TRDL	(2 - 1)
+#define SDRAM_TBDL	(1 - 1)
+#define SDRAM_TREF	1386
+#define SDRAM_TCCD	(1 - 1)
+
+#define SDRAM_TXSR	(NS2CLK(70) - 1)/* Row cycle time after precharge */
+#define SDRAM_TMRD	(3 - 1)		/* Page 10, Mode Register Set */
+
+/* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
+#define SDRAM_TWR	max(\
+	(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
+	(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
+)
+
+#define SDRAM_MODE_BL_SHIFT	0
+#define SDRAM_MODE_CAS_SHIFT	4
+#define SDRAM_MODE_BL		0
+#define SDRAM_MODE_CAS		SDRAM_CAS
+
+int dram_init(void)
+{
+	u32 freq;
+	int rv;
+
+	rv = fmc_setup_gpio();
+	if (rv)
+		return rv;
+
+	setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);
+
+	/*
+	 * Get frequency for NS2CLK calculation.
+	 */
+	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
+
+	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
+		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
+		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
+		&STM32_SDRAM_FMC->sdcr1);
+
+	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
+		| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
+		| SDRAM_NB << FMC_SDCR_NB_SHIFT
+		| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
+		| SDRAM_NR << FMC_SDCR_NR_SHIFT
+		| SDRAM_NC << FMC_SDCR_NC_SHIFT
+		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
+		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
+		&STM32_SDRAM_FMC->sdcr2);
+
+	writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
+		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
+		&STM32_SDRAM_FMC->sdtr1);
+
+	writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
+		| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
+		| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
+		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
+		| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
+		| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
+		| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
+		&STM32_SDRAM_FMC->sdtr2);
+
+	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_START_CLOCK,
+	       &STM32_SDRAM_FMC->sdcmr);
+
+	udelay(200);	/* 200 us delay, page 10, "Power-Up" */
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_PRECHARGE,
+	       &STM32_SDRAM_FMC->sdcmr);
+
+	udelay(100);
+	FMC_BUSY_WAIT();
+
+	writel((FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_AUTOREFRESH
+		| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
+
+	udelay(100);
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_2 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
+		| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
+		<< FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
+		&STM32_SDRAM_FMC->sdcmr);
+
+	udelay(100);
+
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_NORMAL,
+	       &STM32_SDRAM_FMC->sdcmr);
+
+	FMC_BUSY_WAIT();
+
+	/* Refresh timer */
+	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+
+	/*
+	 * Fill in global info with description of SRAM configuration
+	 */
+	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
+	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;
+
+	gd->ram_size = CONFIG_SYS_RAM_SIZE;
+
+	return rv;
+}
+
+static const struct stm32_serial_platdata serial_platdata = {
+	.base = (struct stm32_usart *)STM32_USART1_BASE,
+};
+
+U_BOOT_DEVICE(stm32_serials) = {
+	.name = "serial_stm32",
+	.platdata = &serial_platdata,
+};
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	int res;
+
+	res = uart_setup_gpio();
+	if (res)
+		return res;
+	clock_setup(USART1_CLOCK_CFG);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	char serialno[25];
+	uint32_t u_id_low, u_id_mid, u_id_high;
+
+	if (!getenv("serial#")) {
+		u_id_low  = readl(&STM32_U_ID->u_id_low);
+		u_id_mid  = readl(&STM32_U_ID->u_id_mid);
+		u_id_high = readl(&STM32_U_ID->u_id_high);
+		sprintf(serialno, "%08x%08x%08x",
+			u_id_high, u_id_mid, u_id_low);
+		setenv("serial#", serialno);
+	}
+
+	return 0;
+}
+#endif

u-boot/board/st/stm32f746-disco/Kconfig

@@ -0,0 +1,19 @@
+if TARGET_STM32F746_DISCO
+
+config SYS_BOARD
+	string
+	default "stm32f746-disco"
+
+config SYS_VENDOR
+	string
+	default "st"
+
+config SYS_SOC
+	string
+	default "stm32f7"
+
+config SYS_CONFIG_NAME
+	string
+	default "stm32f746-disco"
+
+endif

u-boot/board/st/stm32f746-disco/MAINTAINERS

@@ -0,0 +1,6 @@
+STM32F746 DISCOVERY BOARD
+M:	Vikas Manocha <vikas.manocha@st.com>
+S:	Maintained
+F:	board/st/stm32f746-disco
+F:	include/configs/stm32f746-disco.h
+F:	configs/stm32f746-disco_defconfig

u-boot/board/st/stm32f746-disco/Makefile

@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016
+# Vikas Manocha <vikas.manocha@st.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= stm32f746-disco.o

u-boot/board/st/stm32f746-disco/stm32f746-disco.c

@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpio.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_stm32x7.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct stm32_gpio_ctl gpio_ctl_gpout = {
+	.mode = STM32_GPIO_MODE_OUT,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_NO,
+	.af = STM32_GPIO_AF0
+};
+
+const struct stm32_gpio_ctl gpio_ctl_usart = {
+	.mode = STM32_GPIO_MODE_AF,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_UP,
+	.af = STM32_GPIO_AF7
+};
+
+static const struct stm32_gpio_dsc usart_gpio[] = {
+	{STM32_GPIO_PORT_A, STM32_GPIO_PIN_9},	/* TX */
+	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_7},	/* RX */
+};
+
+int uart_setup_gpio(void)
+{
+	int i;
+	int rv = 0;
+
+	clock_setup(GPIO_A_CLOCK_CFG);
+	clock_setup(GPIO_B_CLOCK_CFG);
+	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
+		rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
+		if (rv)
+			goto out;
+	}
+
+out:
+	return rv;
+}
+
+static const struct stm32x7_serial_platdata serial_platdata = {
+	.base = (struct stm32_usart *)USART1_BASE,
+	.clock = CONFIG_SYS_CLK_FREQ,
+};
+
+U_BOOT_DEVICE(stm32x7_serials) = {
+	.name = "serial_stm32x7",
+	.platdata = &serial_platdata,
+};
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	int res;
+
+	res = uart_setup_gpio();
+	clock_setup(USART1_CLOCK_CFG);
+	if (res)
+		return res;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
+	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;
+
+	gd->ram_size = CONFIG_SYS_RAM_SIZE;
+	return 0;
+}

u-boot/board/st/stv0991/Kconfig

@@ -0,0 +1,15 @@
+if TARGET_STV0991
+
+config SYS_BOARD
+	default "stv0991"
+
+config SYS_VENDOR
+	default "st"
+
+config SYS_SOC
+	default "stv0991"
+
+config SYS_CONFIG_NAME
+	default "stv0991"
+
+endif

u-boot/board/st/stv0991/MAINTAINERS

@@ -0,0 +1,6 @@
+STV0991 APPLICATION BOARD
+M:	Vikas Manocha <vikas.manocha@st.com>
+S:	Maintained
+F:	board/st/stv0991/
+F:	include/configs/stv0991.h
+F:	configs/stv0991_defconfig

u-boot/board/st/stv0991/Makefile

@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014
+# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= stv0991.o

u-boot/board/st/stv0991/stv0991.c

@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/stv0991_periph.h>
+#include <asm/arch/stv0991_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_pl01x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct gpio_regs *const gpioa_regs =
+		(struct gpio_regs *) GPIOA_BASE_ADDR;
+
+#ifndef CONFIG_OF_CONTROL
+static const struct pl01x_serial_platdata serial_platdata = {
+	.base = 0x80406000,
+	.type = TYPE_PL011,
+	.clock = 2700 * 1000,
+};
+
+U_BOOT_DEVICE(stv09911_serials) = {
+	.name = "serial_pl01x",
+	.platdata = &serial_platdata,
+};
+#endif
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+void show_boot_progress(int progress)
+{
+	printf("%i\n", progress);
+}
+#endif
+
+void enable_eth_phy(void)
+{
+	/* Set GPIOA_06 pad HIGH (Appli board)*/
+	writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir);
+	writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data);
+}
+int board_eth_enable(void)
+{
+	stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4);
+	clock_setup(ETH_CLOCK_CFG);
+	enable_eth_phy();
+	return 0;
+}
+
+int board_qspi_enable(void)
+{
+	stv0991_pinmux_config(QSPI_CS_CLK_PAD);
+	clock_setup(QSPI_CLOCK_CFG);
+	return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	board_eth_enable();
+	board_qspi_enable();
+	return 0;
+}
+
+int board_uart_init(void)
+{
+	stv0991_pinmux_config(UART_GPIOC_30_31);
+	clock_setup(UART_CLOCK_CFG);
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	board_uart_init();
+	return 0;
+}
+#endif
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+
+#if defined(CONFIG_ETH_DESIGNWARE)
+	u32 interface = PHY_INTERFACE_MODE_MII;
+	if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0)
+		ret++;
+#endif
+	return ret;
+}
+#endif