avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/ppcag/bg0900/bg0900.c

@@ -0,0 +1,86 @@
+/*
+ * PPC-AG BG0900 board
+ *
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+	/* IO0 clock at 480MHz */
+	mxs_set_ioclk(MXC_IOCLK0, 480000);
+	/* IO1 clock at 480MHz */
+	mxs_set_ioclk(MXC_IOCLK1, 480000);
+
+	/* SSP2 clock at 160MHz */
+	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	return mxs_dram_init();
+}
+
+int board_init(void)
+{
+	/* Adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	struct mxs_clkctrl_regs *clkctrl_regs =
+		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	struct eth_device *dev;
+	int ret;
+
+	ret = cpu_eth_init(bis);
+
+	/* BG0900 uses ENET_CLK PAD to drive FEC clock */
+	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
+	       &clkctrl_regs->hw_clkctrl_enet);
+
+	/* Reset FEC PHYs */
+	gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
+	udelay(200);
+	gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
+
+	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+	if (ret) {
+		puts("FEC MXS: Unable to init FEC0\n");
+		return ret;
+	}
+
+	dev = eth_get_dev_by_name("FEC0");
+	if (!dev) {
+		puts("FEC MXS: Unable to get FEC0 device entry\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+#endif