Kevin/Jibo-Platform-Tools-OLD
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

avionic design with actual uboot and tooling

Browse Source 
submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md
This commit is contained in:
Kevin
2026-03-03 21:46:32 +02:00
parent fe3ba02c96
commit 68d74d3181
11967 changed files with 2221897 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
u-boot/board/freescale/t208xqds/Kconfig Normal file
View File

@@ -0,0 +1,12 @@
if TARGET_T208XQDS
config SYS_BOARD
default "t208xqds"
config SYS_VENDOR
default "freescale"
config SYS_CONFIG_NAME
default "T208xQDS"
endif

20
u-boot/board/freescale/t208xqds/MAINTAINERS Normal file
View File

@@ -0,0 +1,20 @@
T208XQDS BOARD
M: Shengzhou Liu <Shengzhou.Liu@nxp.com>
S: Maintained
F: board/freescale/t208xqds/
F: include/configs/T208xQDS.h
F: configs/T2080QDS_defconfig
F: configs/T2080QDS_NAND_defconfig
F: configs/T2080QDS_SDCARD_defconfig
F: configs/T2080QDS_SPIFLASH_defconfig
F: configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
F: configs/T2081QDS_defconfig
F: configs/T2081QDS_NAND_defconfig
F: configs/T2081QDS_SDCARD_defconfig
F: configs/T2081QDS_SPIFLASH_defconfig
F: configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
T2080QDS_SECURE_BOOT BOARD
M: Aneesh Bansal <aneesh.bansal@freescale.com>
S: Maintained
F: configs/T2080QDS_SECURE_BOOT_defconfig

17
u-boot/board/freescale/t208xqds/Makefile Normal file
View File

@@ -0,0 +1,17 @@
#
# Copyright 2013 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
else
obj-$(CONFIG_T2080QDS) += t208xqds.o eth_t208xqds.o
obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o
obj-$(CONFIG_PCI) += pci.o
endif
obj-y += ddr.o
obj-y += law.o
obj-y += tlb.o

274
u-boot/board/freescale/t208xqds/README Executable file
View File

@@ -0,0 +1,274 @@
The T2080QDS is a high-performance computing evaluation, development and
test platform supporting the T2080 QorIQ Power Architecture processor.
T2080 SoC Overview
------------------
The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
Architecture processor cores with high-performance datapath acceleration
logic and network and peripheral bus interfaces required for networking,
telecom/datacom, wireless infrastructure, and mil/aerospace applications.
T2080 includes the following functions and features:
- Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
- 2MB L2 cache and 512KB CoreNet platform cache (CPC)
- Hierarchical interconnect fabric
- One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- 16 SerDes lanes up to 10.3125 GHz
- 8 Ethernet interfaces, supporting combinations of the following:
- Up to four 10 Gbps Ethernet MACs
- Up to eight 1 Gbps Ethernet MACs
- Up to four 2.5 Gbps Ethernet MACs
- High-speed peripheral interfaces
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
- Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
- Additional peripheral interfaces
- Two serial ATA (SATA 2.0) controllers
- Two high-speed USB 2.0 controllers with integrated PHY
- Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
- Enhanced serial peripheral interface (eSPI)
- Four I2C controllers
- Four 2-pin UARTs or two 4-pin UARTs
- Integrated Flash Controller supporting NAND and NOR flash
- Three eight-channel DMA engines
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0
Differences between T2080 and T2081
-----------------------------------
Feature T2080 T2081
1G Ethernet numbers: 8 6
10G Ethernet numbers: 4 2
SerDes lanes: 16 8
Serial RapidIO,RMan: 2 no
SATA Controller: 2 no
Aurora: yes no
SoC Package: 896-pins 780-pins
T2080QDS feature overview
-------------------------
Processor:
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
Ethernet interfaces:
- Two 1Gbps RGMII on-board ports
- Four 10Gbps XFI on-board cages
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
- 16 lanes up to 10.3125GHz
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
SATA:
- Two SATA 2.0 ports on-board
SRIO:
- Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
- Supports SD/SDHC/SDXC/eMMC Card
I2C:
- Four I2C controllers.
UART:
- Dual 4-pins UART serial ports
System Logic:
- QIXIS-II FPGA system controll
Debug Features:
- Support Legacy, COP/JTAG, Aurora, Event and EVT
XFI:
- XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
a on-board SFP+ cages, which to house optical module (fiber cable) or
direct attach cable(copper), the copper cable is used to emulate
10GBASE-KR scenario.
So, for XFI usage, there are two scenarios, one will use fiber cable,
another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
introduced to indicate a XFI port will use copper cable, and U-Boot
will fixup the dtb accordingly.
It's used as: fsl_10gkr_copper:<10g_mac_name>
The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they
do not have to be coexist in hwconfig. If a MAC is listed in the env
"fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable
will be used by default.
for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in
hwconfig, then both four XFI ports will use copper cable.
set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two
XFI ports will use copper cable, the other two XFI ports will use fiber
cable.
1000BASE-KX(1G-KX):
- T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper
initialization.
Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1'
stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc.
For ex. set "fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10" in
hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode.
System Memory map
----------------
Start Address End Address Description Size
0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB
0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB
0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB
0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
0x0_0000_0000 0x0_ffff_ffff DDR 4GB
128M NOR Flash memory Map
-------------------------
Start Address End Address Definition Max size
0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
0xE8000000 0xE801FFFF RCW (current bank) 128KB
Software configurations and board settings
------------------------------------------
1. NOR boot:
a. build NOR boot image
$ make T2080QDS_config
$ make
b. program u-boot.bin image to NOR flash
=> tftp 1000000 u-boot.bin
=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
Switching between default bank0 and alternate bank4 on NOR flash
To change boot source to vbank4:
by software: run command 'qixis_reset altbank' in U-Boot.
by DIP-switch: set SW6[1:4] = '0100'
To change boot source to vbank0:
by software: run command 'qixis_reset' in U-Boot.
by DIP-Switch: set SW6[1:4] = '0000'
2. NAND Boot:
a. build PBL image for NAND boot
$ make T2080QDS_NAND_config
$ make
b. program u-boot-with-spl-pbl.bin to NAND flash
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> nand erase 0 $filesize
=> nand write 1000000 0 $filesize
set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
3. SPI Boot:
a. build PBL image for SPI boot
$ make T2080QDS_SPIFLASH_config
$ make
b. program u-boot-with-spl-pbl.bin to SPI flash
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> sf probe 0
=> sf erase 0 f0000
=> sf write 1000000 0 $filesize
set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
4. SD Boot:
a. build PBL image for SD boot
$ make T2080QDS_SDCARD_config
$ make
b. program u-boot-with-spl-pbl.bin to SD/MMC card
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> mmc write 1000000 8 0x800
=> tftp 1000000 fsl_fman_ucode_T2080_xx.bin
=> mmc write 1000000 0x820 80
set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
2-stage NAND/SPI/SD boot loader
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
- No relocation required
Run time view of SPL framework
-------------------------------------------------
|Area | Address |
-------------------------------------------------
|SecureBoot header | 0xFFFC0000 (32KB) |
-------------------------------------------------
|GD, BD | 0xFFFC8000 (4KB) |
-------------------------------------------------
|ENV | 0xFFFC9000 (8KB) |
-------------------------------------------------
|HEAP | 0xFFFCB000 (50KB) |
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T2080QDS
--------------------------------------------------------------
Start End Definition Size
0x000000 0x0FFFFF U-Boot img 1MB (2 blocks)
0x100000 0x17FFFF U-Boot env 512KB (1 block)
0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
Micro SD Card memory Map on T2080QDS
----------------------------------------------------
Block #blocks Definition Size
0x008 2048 U-Boot img 1MB
0x800 0016 U-Boot env 8KB
0x820 0128 FMAN ucode 64KB
SPI Flash memory Map on T2080QDS
----------------------------------------------------
Start End Definition Size
0x000000 0x0FFFFF U-Boot img 1MB
0x100000 0x101FFF U-Boot env 8KB
0x110000 0x11FFFF FMAN ucode 64KB
How to update the ucode of Freescale FMAN
-----------------------------------------
=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin
=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
For more details, please refer to T2080QDS User Guide and access
website www.freescale.com and Freescale QorIQ SDK Infocenter document.

119
u-boot/board/freescale/t208xqds/ddr.c Normal file
View File

@@ -0,0 +1,119 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <i2c.h>
#include <hwconfig.h>
#include <asm/mmu.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <asm/fsl_law.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
ulong ddr_freq;
if (ctrl_num > 1) {
printf("Not supported controller number %d\n", ctrl_num);
return;
}
if (!pdimm->n_ranks)
return;
/*
* we use identical timing for all slots. If needed, change the code
* to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
*/
if (popts->registered_dimm_en)
pbsp = rdimms[0];
else
pbsp = udimms[0];
/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
while (pbsp->datarate_mhz_high) {
if (pbsp->n_ranks == pdimm->n_ranks &&
(pdimm->rank_density >> 30) >= pbsp->rank_gb) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->clk_adjust = pbsp->clk_adjust;
popts->wrlvl_start = pbsp->wrlvl_start;
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
goto found;
}
pbsp_highest = pbsp;
}
pbsp++;
}
if (pbsp_highest) {
printf("Error: board specific timing not found");
printf("for data rate %lu MT/s\n", ddr_freq);
printf("Trying to use the highest speed (%u) parameters\n",
pbsp_highest->datarate_mhz_high);
popts->clk_adjust = pbsp_highest->clk_adjust;
popts->wrlvl_start = pbsp_highest->wrlvl_start;
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
} else {
panic("DIMM is not supported by this board");
}
found:
debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
"wrlvl_ctrl_3 0x%x\n",
pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
pbsp->wrlvl_ctl_3);
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
*/
popts->half_strength_driver_enable = 0;
/*
* Write leveling override
*/
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
/*
* Rtt and Rtt_WR override
*/
popts->rtt_override = 0;
/* Enable ZQ calibration */
popts->zq_en = 1;
/* DHC_EN =1, ODT = 75 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
}
phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
puts("Initializing....using SPD\n");
dram_size = fsl_ddr_sdram();
#else
/* DDR has been initialised by first stage boot loader */
dram_size = fsl_ddr_sdram_size();
#endif
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
return dram_size;
}

71
u-boot/board/freescale/t208xqds/ddr.h Normal file
View File

@@ -0,0 +1,71 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __DDR_H__
#define __DDR_H__
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
u32 rank_gb;
u32 clk_adjust;
u32 wrlvl_start;
u32 wrlvl_ctl_2;
u32 wrlvl_ctl_3;
};
/*
* These tables contain all valid speeds we want to override with board
* specific parameters. datarate_mhz_high values need to be in ascending order
* for each n_ranks group.
*/
static const struct board_specific_parameters udimm0[] = {
/*
* memory controller 0
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
*/
{2, 1200, 0, 10, 7, 0x0708090a, 0x0b0c0d09},
{2, 1400, 0, 10, 7, 0x08090a0c, 0x0d0e0f0a},
{2, 1700, 0, 10, 8, 0x090a0b0c, 0x0e10110c},
{2, 1900, 0, 10, 8, 0x090b0c0f, 0x1012130d},
{2, 2140, 0, 10, 8, 0x090b0c0f, 0x1012130d},
{1, 1200, 0, 10, 7, 0x0808090a, 0x0b0c0c0a},
{1, 1500, 0, 10, 6, 0x07070809, 0x0a0b0b09},
{1, 1600, 0, 10, 8, 0x090b0b0d, 0x0d0e0f0b},
{1, 1700, 0, 8, 8, 0x080a0a0c, 0x0c0d0e0a},
{1, 1900, 0, 10, 8, 0x090a0c0d, 0x0e0f110c},
{1, 2140, 0, 8, 8, 0x090a0b0d, 0x0e0f110b},
{}
};
static const struct board_specific_parameters rdimm0[] = {
/*
* memory controller 0
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
*/
/* TODO: need tuning these parameters if RDIMM is used */
{4, 1350, 0, 10, 9, 0x08070605, 0x06070806},
{4, 1666, 0, 10, 11, 0x0a080706, 0x07090906},
{4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07},
{2, 1350, 0, 10, 9, 0x08070605, 0x06070806},
{2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06},
{2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07},
{1, 1350, 0, 10, 9, 0x08070605, 0x06070806},
{1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06},
{1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07},
{}
};
static const struct board_specific_parameters *udimms[] = {
udimm0,
};
static const struct board_specific_parameters *rdimms[] = {
rdimm0,
};
#endif

812
u-boot/board/freescale/t208xqds/eth_t208xqds.c Normal file
View File

@@ -0,0 +1,812 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Shengzhou Liu <Shengzhou.Liu@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <malloc.h>
#include <fm_eth.h>
#include <fsl_mdio.h>
#include <miiphy.h>
#include <phy.h>
#include <fsl_dtsec.h>
#include <asm/fsl_serdes.h>
#include <hwconfig.h>
#include "../common/qixis.h"
#include "../common/fman.h"
#include "t208xqds_qixis.h"
#define EMI_NONE 0xFFFFFFFF
#define EMI1_RGMII1 0
#define EMI1_RGMII2 1
#define EMI1_SLOT1 2
#if defined(CONFIG_T2080QDS)
#define EMI1_SLOT2 6
#define EMI1_SLOT3 3
#define EMI1_SLOT4 4
#define EMI1_SLOT5 5
#define EMI2 7
#elif defined(CONFIG_T2081QDS)
#define EMI1_SLOT2 3
#define EMI1_SLOT3 4
#define EMI1_SLOT5 5
#define EMI1_SLOT6 6
#define EMI1_SLOT7 7
#define EMI2 8
#endif
#define PCCR1_SGMIIA_KX_MASK 0x00008000
#define PCCR1_SGMIIB_KX_MASK 0x00004000
#define PCCR1_SGMIIC_KX_MASK 0x00002000
#define PCCR1_SGMIID_KX_MASK 0x00001000
#define PCCR1_SGMIIE_KX_MASK 0x00000800
#define PCCR1_SGMIIF_KX_MASK 0x00000400
#define PCCR1_SGMIIG_KX_MASK 0x00000200
#define PCCR1_SGMIIH_KX_MASK 0x00000100
static int mdio_mux[NUM_FM_PORTS];
static const char * const mdio_names[] = {
#if defined(CONFIG_T2080QDS)
"T2080QDS_MDIO_RGMII1",
"T2080QDS_MDIO_RGMII2",
"T2080QDS_MDIO_SLOT1",
"T2080QDS_MDIO_SLOT3",
"T2080QDS_MDIO_SLOT4",
"T2080QDS_MDIO_SLOT5",
"T2080QDS_MDIO_SLOT2",
"T2080QDS_MDIO_10GC",
#elif defined(CONFIG_T2081QDS)
"T2081QDS_MDIO_RGMII1",
"T2081QDS_MDIO_RGMII2",
"T2081QDS_MDIO_SLOT1",
"T2081QDS_MDIO_SLOT2",
"T2081QDS_MDIO_SLOT3",
"T2081QDS_MDIO_SLOT5",
"T2081QDS_MDIO_SLOT6",
"T2081QDS_MDIO_SLOT7",
"T2081QDS_MDIO_10GC",
#endif
};
/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
#if defined(CONFIG_T2080QDS)
static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
#elif defined(CONFIG_T2081QDS)
static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
#endif
static const char *t208xqds_mdio_name_for_muxval(u8 muxval)
{
return mdio_names[muxval];
}
struct mii_dev *mii_dev_for_muxval(u8 muxval)
{
struct mii_dev *bus;
const char *name = t208xqds_mdio_name_for_muxval(muxval);
if (!name) {
printf("No bus for muxval %x\n", muxval);
return NULL;
}
bus = miiphy_get_dev_by_name(name);
if (!bus) {
printf("No bus by name %s\n", name);
return NULL;
}
return bus;
}
struct t208xqds_mdio {
u8 muxval;
struct mii_dev *realbus;
};
static void t208xqds_mux_mdio(u8 muxval)
{
u8 brdcfg4;
if (muxval < 8) {
brdcfg4 = QIXIS_READ(brdcfg[4]);
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
QIXIS_WRITE(brdcfg[4], brdcfg4);
}
}
static int t208xqds_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct t208xqds_mdio *priv = bus->priv;
t208xqds_mux_mdio(priv->muxval);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int t208xqds_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct t208xqds_mdio *priv = bus->priv;
t208xqds_mux_mdio(priv->muxval);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int t208xqds_mdio_reset(struct mii_dev *bus)
{
struct t208xqds_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static int t208xqds_mdio_init(char *realbusname, u8 muxval)
{
struct t208xqds_mdio *pmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate t208xqds MDIO bus\n");
return -1;
}
pmdio = malloc(sizeof(*pmdio));
if (!pmdio) {
printf("Failed to allocate t208xqds private data\n");
free(bus);
return -1;
}
bus->read = t208xqds_mdio_read;
bus->write = t208xqds_mdio_write;
bus->reset = t208xqds_mdio_reset;
strcpy(bus->name, t208xqds_mdio_name_for_muxval(muxval));
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!pmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(pmdio);
return -1;
}
pmdio->muxval = muxval;
bus->priv = pmdio;
return mdio_register(bus);
}
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
enum fm_port port, int offset)
{
int phy;
char alias[20];
char lane_mode[2][20] = {"1000BASE-KX", "10GBASE-KR"};
char buf[32] = "serdes-1,";
struct fixed_link f_link;
int media_type = 0;
int off;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_T2080QDS
serdes_corenet_t *srds_regs =
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1);
#endif
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
phy = fm_info_get_phy_address(port);
switch (port) {
#if defined(CONFIG_T2080QDS)
case FM1_DTSEC1:
if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx1");
fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio1");
sprintf(buf, "%s%s%s", buf, "lane-c,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIIH_KX_MASK);
break;
}
case FM1_DTSEC2:
if (hwconfig_sub("fsl_1gkx", "fm1_1g2")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx2");
fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio2");
sprintf(buf, "%s%s%s", buf, "lane-d,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIIG_KX_MASK);
break;
}
case FM1_DTSEC9:
if (hwconfig_sub("fsl_1gkx", "fm1_1g9")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx9");
fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio9");
sprintf(buf, "%s%s%s", buf, "lane-a,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIIE_KX_MASK);
break;
}
case FM1_DTSEC10:
if (hwconfig_sub("fsl_1gkx", "fm1_1g10")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx10");
fdt_status_okay_by_alias(fdt,
"1gkx_pcs_mdio10");
sprintf(buf, "%s%s%s", buf, "lane-b,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIIF_KX_MASK);
break;
}
if (mdio_mux[port] == EMI1_SLOT2) {
sprintf(alias, "phy_sgmii_s2_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot2");
} else if (mdio_mux[port] == EMI1_SLOT3) {
sprintf(alias, "phy_sgmii_s3_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot3");
}
break;
case FM1_DTSEC5:
if (hwconfig_sub("fsl_1gkx", "fm1_1g5")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx5");
fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio5");
sprintf(buf, "%s%s%s", buf, "lane-g,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIIC_KX_MASK);
break;
}
case FM1_DTSEC6:
if (hwconfig_sub("fsl_1gkx", "fm1_1g6")) {
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_1gkx6");
fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio6");
sprintf(buf, "%s%s%s", buf, "lane-h,",
(char *)lane_mode[0]);
out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
PCCR1_SGMIID_KX_MASK);
break;
}
if (mdio_mux[port] == EMI1_SLOT1) {
sprintf(alias, "phy_sgmii_s1_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot1");
} else if (mdio_mux[port] == EMI1_SLOT2) {
sprintf(alias, "phy_sgmii_s2_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot2");
}
break;
#elif defined(CONFIG_T2081QDS)
case FM1_DTSEC1:
case FM1_DTSEC2:
case FM1_DTSEC5:
case FM1_DTSEC6:
case FM1_DTSEC9:
case FM1_DTSEC10:
if (mdio_mux[port] == EMI1_SLOT2) {
sprintf(alias, "phy_sgmii_s2_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot2");
} else if (mdio_mux[port] == EMI1_SLOT3) {
sprintf(alias, "phy_sgmii_s3_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot3");
} else if (mdio_mux[port] == EMI1_SLOT5) {
sprintf(alias, "phy_sgmii_s5_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot5");
} else if (mdio_mux[port] == EMI1_SLOT6) {
sprintf(alias, "phy_sgmii_s6_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot6");
} else if (mdio_mux[port] == EMI1_SLOT7) {
sprintf(alias, "phy_sgmii_s7_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
fdt_status_okay_by_alias(fdt, "emi1_slot7");
}
break;
#endif
default:
break;
}
if (media_type) {
/* set property for 1000BASE-KX in dtb */
off = fdt_node_offset_by_compat_reg(fdt,
"fsl,fman-memac-mdio", addr + 0x1000);
fdt_setprop_string(fdt, off, "lane-instance", buf);
}
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
switch (srds_s1) {
case 0x66: /* XFI interface */
case 0x6b:
case 0x6c:
case 0x6d:
case 0x71:
/*
* if the 10G is XFI, check hwconfig to see what is the
* media type, there are two types, fiber or copper,
* fix the dtb accordingly.
*/
switch (port) {
case FM1_10GEC1:
if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) {
/* it's MAC9 */
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_xfi9");
fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio9");
sprintf(buf, "%s%s%s", buf, "lane-a,",
(char *)lane_mode[1]);
}
break;
case FM1_10GEC2:
if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) {
/* it's MAC10 */
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_xfi10");
fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio10");
sprintf(buf, "%s%s%s", buf, "lane-b,",
(char *)lane_mode[1]);
}
break;
case FM1_10GEC3:
if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g3")) {
/* it's MAC1 */
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_xfi1");
fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio1");
sprintf(buf, "%s%s%s", buf, "lane-c,",
(char *)lane_mode[1]);
}
break;
case FM1_10GEC4:
if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g4")) {
/* it's MAC2 */
media_type = 1;
fdt_set_phy_handle(fdt, compat, addr,
"phy_xfi2");
fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio2");
sprintf(buf, "%s%s%s", buf, "lane-d,",
(char *)lane_mode[1]);
}
break;
default:
return;
}
if (!media_type) {
/* fixed-link is used for XFI fiber cable */
f_link.phy_id = port;
f_link.duplex = 1;
f_link.link_speed = 10000;
f_link.pause = 0;
f_link.asym_pause = 0;
fdt_delprop(fdt, offset, "phy-handle");
fdt_setprop(fdt, offset, "fixed-link", &f_link,
sizeof(f_link));
} else {
/* set property for copper cable */
off = fdt_node_offset_by_compat_reg(fdt,
"fsl,fman-memac-mdio", addr + 0x1000);
fdt_setprop_string(fdt, off,
"lane-instance", buf);
}
break;
default:
break;
}
}
}
void fdt_fixup_board_enet(void *fdt)
{
return;
}
/*
* This function reads RCW to check if Serdes1{A:H} is configured
* to slot 1/2/3/4/5/6/7 and update the lane_to_slot[] array accordingly
*/
static void initialize_lane_to_slot(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
switch (srds_s1) {
#if defined(CONFIG_T2080QDS)
case 0x51:
case 0x5f:
case 0x65:
case 0x6b:
case 0x71:
lane_to_slot[5] = 2;
lane_to_slot[6] = 2;
lane_to_slot[7] = 2;
break;
case 0xa6:
case 0x8e:
case 0x8f:
case 0x82:
case 0x83:
case 0xd3:
case 0xd9:
case 0xcb:
lane_to_slot[6] = 2;
lane_to_slot[7] = 2;
break;
case 0xda:
lane_to_slot[4] = 3;
lane_to_slot[5] = 3;
lane_to_slot[6] = 3;
lane_to_slot[7] = 3;
break;
#elif defined(CONFIG_T2081QDS)
case 0x6b:
lane_to_slot[4] = 1;
lane_to_slot[5] = 3;
lane_to_slot[6] = 3;
lane_to_slot[7] = 3;
break;
case 0xca:
case 0xcb:
lane_to_slot[1] = 7;
lane_to_slot[2] = 6;
lane_to_slot[3] = 5;
lane_to_slot[5] = 3;
lane_to_slot[6] = 3;
lane_to_slot[7] = 3;
break;
case 0xf2:
lane_to_slot[1] = 7;
lane_to_slot[2] = 7;
lane_to_slot[3] = 7;
lane_to_slot[5] = 4;
lane_to_slot[6] = 3;
lane_to_slot[7] = 7;
break;
#endif
default:
break;
}
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_FMAN_ENET)
int i, idx, lane, slot, interface;
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
initialize_lane_to_slot();
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
mdio_mux[i] = EMI_NONE;
dtsec_mdio_info.regs =
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
/* Register the 1G MDIO bus */
fm_memac_mdio_init(bis, &dtsec_mdio_info);
tgec_mdio_info.regs =
(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
/* Register the 10G MDIO bus */
fm_memac_mdio_init(bis, &tgec_mdio_info);
/* Register the muxing front-ends to the MDIO buses */
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
#if defined(CONFIG_T2080QDS)
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
#endif
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
#if defined(CONFIG_T2081QDS)
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
#endif
t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
/* Set the two on-board RGMII PHY address */
fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)
fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
else
fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR);
switch (srds_s1) {
case 0x1b:
case 0x1c:
case 0x95:
case 0xa2:
case 0x94:
/* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot2 */
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
/* T2080QDS: SGMII in Slot2; T2081QDS: SGMII in Slot1 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
break;
case 0x50:
case 0x51:
case 0x5e:
case 0x5f:
case 0x64:
case 0x65:
/* T2080QDS: XAUI/HiGig in Slot3; T2081QDS: in Slot2 */
fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
/* T2080QDS: SGMII in Slot2; T2081QDS: in Slot3 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
break;
case 0x66:
case 0x67:
/*
* XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
* MDIO can access it successfully, and then MDIO thinks
* the XAUI card is used for the XFI MAC, which will cause
* error.
*/
fm_info_set_phy_address(FM1_10GEC1, 4);
fm_info_set_phy_address(FM1_10GEC2, 5);
fm_info_set_phy_address(FM1_10GEC3, 6);
fm_info_set_phy_address(FM1_10GEC4, 7);
break;
case 0x6a:
case 0x6b:
fm_info_set_phy_address(FM1_10GEC1, 4);
fm_info_set_phy_address(FM1_10GEC2, 5);
fm_info_set_phy_address(FM1_10GEC3, 6);
fm_info_set_phy_address(FM1_10GEC4, 7);
/* T2080QDS: SGMII in Slot2; T2081QDS: in Slot3 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
break;
case 0x6c:
case 0x6d:
fm_info_set_phy_address(FM1_10GEC1, 4);
fm_info_set_phy_address(FM1_10GEC2, 5);
/* T2080QDS: SGMII in Slot3; T2081QDS: in Slot2 */
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
break;
case 0x70:
case 0x71:
/* SGMII in Slot3 */
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
/* SGMII in Slot2 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
break;
case 0xa6:
case 0x8e:
case 0x8f:
case 0x82:
case 0x83:
/* SGMII in Slot3 */
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
/* SGMII in Slot2 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
break;
case 0xa4:
case 0x96:
case 0x8a:
/* SGMII in Slot3 */
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
break;
#if defined(CONFIG_T2080QDS)
case 0xd9:
case 0xd3:
case 0xcb:
/* SGMII in Slot3 */
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
/* SGMII in Slot2 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
break;
#elif defined(CONFIG_T2081QDS)
case 0xca:
case 0xcb:
/* SGMII in Slot3 */
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
/* SGMII in Slot5 */
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
/* SGMII in Slot6 */
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
/* SGMII in Slot7 */
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
break;
#endif
case 0xf2:
/* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
break;
default:
break;
}
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
idx = i - FM1_DTSEC1;
interface = fm_info_get_enet_if(i);
switch (interface) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(FSL_SRDS_1,
SGMII_FM1_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
debug("FM1@DTSEC%u expects SGMII in slot %u\n",
idx + 1, slot);
if (QIXIS_READ(present2) & (1 << (slot - 1)))
fm_disable_port(i);
switch (slot) {
case 1:
mdio_mux[i] = EMI1_SLOT1;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
case 2:
mdio_mux[i] = EMI1_SLOT2;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
case 3:
mdio_mux[i] = EMI1_SLOT3;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
#if defined(CONFIG_T2081QDS)
case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
case 6:
mdio_mux[i] = EMI1_SLOT6;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
case 7:
mdio_mux[i] = EMI1_SLOT7;
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
#endif
}
break;
case PHY_INTERFACE_MODE_RGMII:
if (i == FM1_DTSEC3)
mdio_mux[i] = EMI1_RGMII1;
else if (i == FM1_DTSEC4 || FM1_DTSEC10)
mdio_mux[i] = EMI1_RGMII2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
break;
default:
break;
}
}
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
idx = i - FM1_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
if (srds_s1 == 0x51) {
lane = serdes_get_first_lane(FSL_SRDS_1,
XAUI_FM1_MAC9 + idx);
} else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) {
lane = serdes_get_first_lane(FSL_SRDS_1,
HIGIG_FM1_MAC9 + idx);
} else {
if (i == FM1_10GEC1 || i == FM1_10GEC2)
lane = serdes_get_first_lane(FSL_SRDS_1,
XFI_FM1_MAC9 + idx);
else
lane = serdes_get_first_lane(FSL_SRDS_1,
XFI_FM1_MAC1 + idx);
}
if (lane < 0)
break;
mdio_mux[i] = EMI2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) ||
(srds_s1 == 0x6a) || (srds_s1 == 0x70) ||
(srds_s1 == 0x6c) || (srds_s1 == 0x6d) ||
(srds_s1 == 0x71)) {
/* As XFI is in cage intead of a slot, so
* ensure doesn't disable the corresponding port
*/
break;
}
slot = lane_to_slot[lane];
if (QIXIS_READ(present2) & (1 << (slot - 1)))
fm_disable_port(i);
break;
default:
break;
}
}
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
return pci_eth_init(bis);
}

34
u-boot/board/freescale/t208xqds/law.c Normal file
View File

@@ -0,0 +1,34 @@
/*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/fsl_law.h>
#include <asm/mmu.h>
struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_BMAN_MEM_PHYS
SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
#endif
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
#ifdef QIXIS_BASE_PHYS
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
/* Limit DCSR to 32M to access NPC Trace Buffer */
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
#endif
};
int num_law_entries = ARRAY_SIZE(law_table);

23
u-boot/board/freescale/t208xqds/pci.c Normal file
View File

@@ -0,0 +1,23 @@
/*
* Copyright 2007-2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/fsl_pci.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/fsl_serdes.h>
void pci_init_board(void)
{
fsl_pcie_init_board(0);
}
void pci_of_setup(void *blob, bd_t *bd)
{
FT_FSL_PCI_SETUP;
}

139
u-boot/board/freescale/t208xqds/spl.c Normal file
View File

@@ -0,0 +1,139 @@
/* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <console.h>
#include <malloc.h>
#include <ns16550.h>
#include <nand.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <spi_flash.h>
#include "../common/qixis.h"
#include "t208xqds_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
phys_size_t get_effective_memsize(void)
{
return CONFIG_SYS_L3_SIZE;
}
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
switch (sysclk_conf & 0x0F) {
case QIXIS_SYSCLK_83:
return 83333333;
case QIXIS_SYSCLK_100:
return 100000000;
case QIXIS_SYSCLK_125:
return 125000000;
case QIXIS_SYSCLK_133:
return 133333333;
case QIXIS_SYSCLK_150:
return 150000000;
case QIXIS_SYSCLK_160:
return 160000000;
case QIXIS_SYSCLK_166:
return 166666666;
}
return 66666666;
}
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
return 100000000;
case QIXIS_DDRCLK_125:
return 125000000;
case QIXIS_DDRCLK_133:
return 133333333;
}
return 66666666;
}
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
/* Update GD pointer */
gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
console_init_f();
/* initialize selected port with appropriate baud rate */
sys_clk = get_board_sys_clk();
plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
ccb_clk = sys_clk * plat_ratio / 2;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
ccb_clk / 16 / CONFIG_BAUDRATE);
#if defined(CONFIG_SPL_MMC_BOOT)
puts("\nSD boot...\n");
#elif defined(CONFIG_SPL_SPI_BOOT)
puts("\nSPI boot...\n");
#elif defined(CONFIG_SPL_NAND_BOOT)
puts("\nNAND boot...\n");
#endif
relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
bd_t *bd;
bd = (bd_t *)(gd + sizeof(gd_t));
memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
bd->bi_memsize = CONFIG_SYS_L3_SIZE;
probecpu();
get_clocks();
mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
CONFIG_SPL_RELOC_MALLOC_SIZE);
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
#endif
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_valid = 1;
i2c_init_all();
gd->ram_size = initdram(0);
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
#elif defined(CONFIG_SPL_SPI_BOOT)
spi_boot();
#elif defined(CONFIG_SPL_NAND_BOOT)
nand_boot();
#endif
}

16
u-boot/board/freescale/t208xqds/t2080_rcw.cfg Normal file
View File

@@ -0,0 +1,16 @@
#PBL preamble and RCW header
aa55aa55 010e0100
#For T2080 v1.0
#SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
#12100017 15000000 00000000 00000000
#66150002 00008400 e8104000 c1000000
#00000000 00000000 00000000 000307fc
#00000000 00000000 00000000 00000004
#For T2080 v1.1
#SerDes=0x66_0x15, Core=1800MHz, DDR=1867MT/s
0c070012 0e000000 00000000 00000000
66150002 00000000 e8104000 c1000000
00000000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004

8
u-boot/board/freescale/t208xqds/t2081_rcw.cfg Normal file
View File

@@ -0,0 +1,8 @@
#PBL preamble and RCW header
aa55aa55 010e0100
#Default SerDes Protocol: 0x6C
#Core/DDR: 1533Mhz/2133MT/s
12100017 15000000 00000000 00000000
6c000002 00008000 e8104000 c1000000
00000000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004

41
u-boot/board/freescale/t208xqds/t208x_pbi.cfg Normal file
View File

@@ -0,0 +1,41 @@
#
# Copyright 2013 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
# Refer doc/README.pblimage for more details about how-to configure
# and create PBL boot image
#
#PBI commands
#Initialize CPC1
09010000 00200400
09138000 00000000
091380c0 00000100
#512KB SRAM
09010100 00000000
09010104 fff80009
09010f00 08000000
#enable CPC1
09010000 80000000
#Configure LAW for CPC1
09000d00 00000000
09000d04 fff80000
09000d08 81000012
#Initialize eSPI controller, default configuration is slow for eSPI to
#load data, this configuration comes from u-boot eSPI driver.
09110000 80000403
09110020 2d170008
09110024 00100008
09110028 00100008
0911002c 00100008
#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
094fc030 00008148
094fd030 00008148
#Configure alternate space
09000010 00000000
09000014 ff000000
09000018 81000000
#Flush PBL data
09138000 00000000
091380c0 00000000

472
u-boot/board/freescale/t208xqds/t208xqds.c Normal file
View File

@@ -0,0 +1,472 @@
/*
* Copyright 2009-2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <i2c.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "../common/qixis.h"
#include "../common/vsc3316_3308.h"
#include "../common/vid.h"
#include "t208xqds.h"
#include "t208xqds_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
char buf[64];
u8 sw;
struct cpu_type *cpu = gd->arch.cpu;
static const char *freq[4] = {
"100.00MHZ(from 8T49N222A)", "125.00MHz",
"156.25MHZ", "100.00MHz"
};
printf("Board: %sQDS, ", cpu->name);
sw = QIXIS_READ(arch);
printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
#ifdef CONFIG_SDCARD
puts("SD/MMC\n");
#elif CONFIG_SPIFLASH
puts("SPI\n");
#else
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
if (sw < 0x8)
printf("vBank%d\n", sw);
else if (sw == 0x8)
puts("Promjet\n");
else if (sw == 0x9)
puts("NAND\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
#endif
printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
qixis_read_tag(buf), (int)qixis_read_minor());
/* the timestamp string contains "\n" at the end */
printf(" on %s", qixis_read_time(buf));
puts("SERDES Reference Clocks:\n");
sw = QIXIS_READ(brdcfg[2]);
printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6],
freq[(sw >> 4) & 0x3]);
printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2],
freq[sw & 0x3]);
return 0;
}
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
}
return 0;
}
int i2c_multiplexer_select_vid_channel(u8 channel)
{
return select_i2c_ch_pca9547(channel);
}
int brd_mux_lane_to_slot(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 srds_prtcl_s1;
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
#if defined(CONFIG_T2080QDS)
u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
#endif
switch (srds_prtcl_s1) {
case 0:
/* SerDes1 is not enabled */
break;
#if defined(CONFIG_T2080QDS)
case 0x1b:
case 0x1c:
case 0xa2:
/* SD1(A:D) => SLOT3 SGMII
* SD1(G:H) => SLOT1 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x1a);
break;
case 0x94:
case 0x95:
/* SD1(A:B) => SLOT3 SGMII@1.25bps
* SD1(C:D) => SFP Module, SGMII@3.125bps
* SD1(E:H) => SLOT1 SGMII@1.25bps
*/
case 0x96:
/* SD1(A:B) => SLOT3 SGMII@1.25bps
* SD1(C) => SFP Module, SGMII@3.125bps
* SD1(D) => SFP Module, SGMII@1.25bps
* SD1(E:H) => SLOT1 PCIe4 x4
*/
QIXIS_WRITE(brdcfg[12], 0x3a);
break;
case 0x50:
case 0x51:
/* SD1(A:D) => SLOT3 XAUI
* SD1(E) => SLOT1 PCIe4
* SD1(F:H) => SLOT2 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x15);
break;
case 0x66:
case 0x67:
/* SD1(A:D) => XFI cage
* SD1(E:H) => SLOT1 PCIe4
*/
QIXIS_WRITE(brdcfg[12], 0xfe);
break;
case 0x6a:
case 0x6b:
/* SD1(A:D) => XFI cage
* SD1(E) => SLOT1 PCIe4
* SD1(F:H) => SLOT2 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0xf1);
break;
case 0x6c:
case 0x6d:
/* SD1(A:B) => XFI cage
* SD1(C:D) => SLOT3 SGMII
* SD1(E:H) => SLOT1 PCIe4
*/
QIXIS_WRITE(brdcfg[12], 0xda);
break;
case 0x6e:
/* SD1(A:B) => SFP Module, XFI
* SD1(C:D) => SLOT3 SGMII
* SD1(E:F) => SLOT1 PCIe4 x2
* SD1(G:H) => SLOT2 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0xd9);
break;
case 0xda:
/* SD1(A:H) => SLOT3 PCIe3 x8
*/
QIXIS_WRITE(brdcfg[12], 0x0);
break;
case 0xc8:
/* SD1(A) => SLOT3 PCIe3 x1
* SD1(B) => SFP Module, SGMII@1.25bps
* SD1(C:D) => SFP Module, SGMII@3.125bps
* SD1(E:F) => SLOT1 PCIe4 x2
* SD1(G:H) => SLOT2 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x79);
break;
case 0xab:
/* SD1(A:D) => SLOT3 PCIe3 x4
* SD1(E:H) => SLOT1 PCIe4 x4
*/
QIXIS_WRITE(brdcfg[12], 0x1a);
break;
#elif defined(CONFIG_T2081QDS)
case 0x50:
case 0x51:
/* SD1(A:D) => SLOT2 XAUI
* SD1(E) => SLOT1 PCIe4 x1
* SD1(F:H) => SLOT3 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x98);
QIXIS_WRITE(brdcfg[13], 0x70);
break;
case 0x6a:
case 0x6b:
/* SD1(A:D) => XFI SFP Module
* SD1(E) => SLOT1 PCIe4 x1
* SD1(F:H) => SLOT3 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x80);
QIXIS_WRITE(brdcfg[13], 0x70);
break;
case 0x6c:
case 0x6d:
/* SD1(A:B) => XFI SFP Module
* SD1(C:D) => SLOT2 SGMII
* SD1(E:H) => SLOT1 PCIe4 x4
*/
QIXIS_WRITE(brdcfg[12], 0xe8);
QIXIS_WRITE(brdcfg[13], 0x0);
break;
case 0xaa:
case 0xab:
/* SD1(A:D) => SLOT2 PCIe3 x4
* SD1(F:H) => SLOT1 SGMI4 x4
*/
QIXIS_WRITE(brdcfg[12], 0xf8);
QIXIS_WRITE(brdcfg[13], 0x0);
break;
case 0xca:
case 0xcb:
/* SD1(A) => SLOT2 PCIe3 x1
* SD1(B) => SLOT7 SGMII
* SD1(C) => SLOT6 SGMII
* SD1(D) => SLOT5 SGMII
* SD1(E) => SLOT1 PCIe4 x1
* SD1(F:H) => SLOT3 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x80);
QIXIS_WRITE(brdcfg[13], 0x70);
break;
case 0xde:
case 0xdf:
/* SD1(A:D) => SLOT2 PCIe3 x4
* SD1(E) => SLOT1 PCIe4 x1
* SD1(F) => SLOT4 PCIe1 x1
* SD1(G) => SLOT3 PCIe2 x1
* SD1(H) => SLOT7 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x98);
QIXIS_WRITE(brdcfg[13], 0x25);
break;
case 0xf2:
/* SD1(A) => SLOT2 PCIe3 x1
* SD1(B:D) => SLOT7 SGMII
* SD1(E) => SLOT1 PCIe4 x1
* SD1(F) => SLOT4 PCIe1 x1
* SD1(G) => SLOT3 PCIe2 x1
* SD1(H) => SLOT7 SGMII
*/
QIXIS_WRITE(brdcfg[12], 0x81);
QIXIS_WRITE(brdcfg[13], 0xa5);
break;
#endif
default:
printf("WARNING: unsupported for SerDes1 Protocol %d\n",
srds_prtcl_s1);
return -1;
}
#ifdef CONFIG_T2080QDS
switch (srds_prtcl_s2) {
case 0:
/* SerDes2 is not enabled */
break;
case 0x01:
case 0x02:
/* SD2(A:H) => SLOT4 PCIe1 */
QIXIS_WRITE(brdcfg[13], 0x10);
break;
case 0x15:
case 0x16:
/*
* SD2(A:D) => SLOT4 PCIe1
* SD2(E:F) => SLOT5 PCIe2
* SD2(G:H) => SATA1,SATA2
*/
QIXIS_WRITE(brdcfg[13], 0xb0);
break;
case 0x18:
/*
* SD2(A:D) => SLOT4 PCIe1
* SD2(E:F) => SLOT5 Aurora
* SD2(G:H) => SATA1,SATA2
*/
QIXIS_WRITE(brdcfg[13], 0x78);
break;
case 0x1f:
/*
* SD2(A:D) => SLOT4 PCIe1
* SD2(E:H) => SLOT5 PCIe2
*/
QIXIS_WRITE(brdcfg[13], 0xa0);
break;
case 0x29:
case 0x2d:
case 0x2e:
/*
* SD2(A:D) => SLOT4 SRIO2
* SD2(E:H) => SLOT5 SRIO1
*/
QIXIS_WRITE(brdcfg[13], 0xa0);
break;
case 0x36:
/*
* SD2(A:D) => SLOT4 SRIO2
* SD2(E:F) => Aurora
* SD2(G:H) => SATA1,SATA2
*/
QIXIS_WRITE(brdcfg[13], 0x78);
break;
default:
printf("WARNING: unsupported for SerDes2 Protocol %d\n",
srds_prtcl_s2);
return -1;
}
#endif
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
/* Disable remote I2C connection to qixis fpga */
QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
/*
* Adjust core voltage according to voltage ID
* This function changes I2C mux to channel 2.
*/
if (adjust_vdd(0))
printf("Warning: Adjusting core voltage failed.\n");
brd_mux_lane_to_slot();
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
return 0;
}
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
/* use accurate clock measurement */
int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
u32 val;
val = freq * base;
if (val) {
debug("SYS Clock measurement is: %d\n", val);
return val;
} else {
printf("Warning: SYS clock measurement is invalid, ");
printf("using value from brdcfg1.\n");
}
#endif
switch (sysclk_conf & 0x0F) {
case QIXIS_SYSCLK_83:
return 83333333;
case QIXIS_SYSCLK_100:
return 100000000;
case QIXIS_SYSCLK_125:
return 125000000;
case QIXIS_SYSCLK_133:
return 133333333;
case QIXIS_SYSCLK_150:
return 150000000;
case QIXIS_SYSCLK_160:
return 160000000;
case QIXIS_SYSCLK_166:
return 166666666;
}
return 66666666;
}
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
/* use accurate clock measurement */
int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
u32 val;
val = freq * base;
if (val) {
debug("DDR Clock measurement is: %d\n", val);
return val;
} else {
printf("Warning: DDR clock measurement is invalid, ");
printf("using value from brdcfg1.\n");
}
#endif
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
return 100000000;
case QIXIS_DDRCLK_125:
return 125000000;
case QIXIS_DDRCLK_133:
return 133333333;
}
return 66666666;
}
int misc_init_r(void)
{
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
fdt_fixup_dr_usb(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
return 0;
}

13
u-boot/board/freescale/t208xqds/t208xqds.h Normal file
View File

@@ -0,0 +1,13 @@
/*
* Copyright 2011-2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CORENET_DS_H__
#define __CORENET_DS_H__
void fdt_fixup_board_enet(void *blob);
void pci_of_setup(void *blob, bd_t *bd);
#endif

49
u-boot/board/freescale/t208xqds/t208xqds_qixis.h Normal file
View File

@@ -0,0 +1,49 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __T208xQDS_QIXIS_H__
#define __T208xQDS_QIXIS_H__
/* Definitions of QIXIS Registers for T208xQDS */
#define QIXIS_SRDS1CLK_122 0x5a
#define QIXIS_SRDS1CLK_125 0x5e
/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
#define BRDCFG4_EMISEL_MASK 0xE0
#define BRDCFG4_EMISEL_SHIFT 5
/* SYSCLK */
#define QIXIS_SYSCLK_66 0x0
#define QIXIS_SYSCLK_83 0x1
#define QIXIS_SYSCLK_100 0x2
#define QIXIS_SYSCLK_125 0x3
#define QIXIS_SYSCLK_133 0x4
#define QIXIS_SYSCLK_150 0x5
#define QIXIS_SYSCLK_160 0x6
#define QIXIS_SYSCLK_166 0x7
/* DDRCLK */
#define QIXIS_DDRCLK_66 0x0
#define QIXIS_DDRCLK_100 0x1
#define QIXIS_DDRCLK_125 0x2
#define QIXIS_DDRCLK_133 0x3
#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */
#define BRDCFG9_SFP_TX_EN 0x10
#define BRDCFG12_SD3EN_MASK 0x20
#define BRDCFG12_SD3MX_MASK 0x08
#define BRDCFG12_SD3MX_SLOT5 0x08
#define BRDCFG12_SD3MX_SLOT6 0x00
#define BRDCFG12_SD4EN_MASK 0x04
#define BRDCFG12_SD4MX_MASK 0x03
#define BRDCFG12_SD4MX_SLOT7 0x02
#define BRDCFG12_SD4MX_SLOT8 0x01
#define BRDCFG12_SD4MX_AURO_SATA 0x00
#endif

153
u-boot/board/freescale/t208xqds/tlb.c Normal file
View File

@@ -0,0 +1,153 @@
/*
* Copyright 2008-2013 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/mmu.h>
struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 0 - for temp stack in cache */
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
CONFIG_SYS_INIT_RAM_ADDR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
/* TLB 1 */
/* *I*** - Covers boot page */
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
/*
* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
* SRAM is at 0xfff00000, it covered the 0xfffff000.
*/
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
* space is at 0xfff00000, it covered the 0xfffff000.
*/
SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
#else
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
#endif
/* *I*G* - CCSRBAR */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_16M, 1),
/* *I*G* - Flash, localbus */
/* This will be changed to *I*G* after relocation to RAM. */
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 2, BOOKE_PAGESZ_256M, 1),
#ifndef CONFIG_SPL_BUILD
/* *I*G* - PCIe 1, 0x80000000 */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_512M, 1),
/* *I*G* - PCIe 2, 0xa0000000 */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCIe 3, 0xb0000000 */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCIe 4, 0xc0000000 */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 6, BOOKE_PAGESZ_256M, 1),
/* *I*G* - PCI I/O */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_256K, 1),
/* Bman/Qman */
#ifdef CONFIG_SYS_BMAN_MEM_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 9, BOOKE_PAGESZ_16M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_16M, 1),
#endif
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 11, BOOKE_PAGESZ_16M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 12, BOOKE_PAGESZ_16M, 1),
#endif
#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 13, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
* *I*G - NAND
* entry 14 and 15 has been used hard coded, they will be disabled
* in cpu_init_f, so we use entry 16 for nand.
*/
SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 16, BOOKE_PAGESZ_64K, 1),
#endif
#ifdef QIXIS_BASE_PHYS
SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 17, BOOKE_PAGESZ_4K, 1),
#endif
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/*
* SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
* fetching ucode and ENV from master
*/
SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
0, 18, BOOKE_PAGESZ_1M, 1),
#endif
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 19, BOOKE_PAGESZ_2G, 1)
#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);