avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/bf533-stamp/ide-cf.c

@@ -0,0 +1,98 @@
+/*
+ * CF IDE addon card code
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+void cf_outb(unsigned char val, volatile unsigned char *addr)
+{
+	/* "ETHERNET" means the expansion memory banks */
+	swap_to(ETHERNET);
+
+	*addr = val;
+	SSYNC();
+
+	swap_to(FLASH);
+}
+
+unsigned char cf_inb(volatile unsigned char *addr)
+{
+	unsigned char c;
+
+	swap_to(ETHERNET);
+
+	c = *addr;
+	SSYNC();
+
+	swap_to(FLASH);
+
+	return c;
+}
+
+void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
+{
+	int i;
+
+	swap_to(ETHERNET);
+
+	for (i = 0; i < words; i++) {
+		*(sect_buf + i) = *addr;
+		SSYNC();
+	}
+
+	swap_to(FLASH);
+}
+
+void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
+{
+	int i;
+
+	swap_to(ETHERNET);
+
+	for (i = 0; i < words; i++) {
+		*addr = *(sect_buf + i);
+		SSYNC();
+	}
+
+	swap_to(FLASH);
+}
+
+/* Definitions used in  Compact Flash Boot support */
+#define FIO_EDGE_CF_BITS	0x0000
+#define FIO_POLAR_CF_BITS	0x0000
+#define FIO_EDGE_BITS		0x1E0
+#define FIO_POLAR_BITS		0x160
+
+/* Compact flash status bits in status register */
+#define CF_STAT_BITS	0x00000060
+
+void cf_ide_init(void)
+{
+	int i, cf_stat;
+
+	/* Check whether CF card is inserted */
+	bfin_write_FIO_EDGE(FIO_EDGE_CF_BITS);
+	bfin_write_FIO_POLAR(FIO_POLAR_CF_BITS);
+	for (i = 0; i < 0x300; i++)
+		asm volatile("nop;");
+
+	cf_stat = bfin_read_FIO_FLAG_S() & CF_STAT_BITS;
+
+	bfin_write_FIO_EDGE(FIO_EDGE_BITS);
+	bfin_write_FIO_POLAR(FIO_POLAR_BITS);
+
+	if (!cf_stat) {
+		for (i = 0; i < 0x3000; i++)
+			asm volatile("nop;");
+
+		ide_init();
+	}
+}