avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/board/armltd/vexpress64/vexpress64.c

@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ * Sharma Bhupesh <bhupesh.sharma@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_pl01x.h>
+#include "pcie.h"
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct pl01x_serial_platdata serial_platdata = {
+	.base = V2M_UART0,
+	.type = TYPE_PL011,
+	.clock = CONFIG_PL011_CLOCK,
+};
+
+U_BOOT_DEVICE(vexpress_serials) = {
+	.name = "serial_pl01x",
+	.platdata = &serial_platdata,
+};
+
+static struct mm_region vexpress64_mem_map[] = {
+	{
+		.base = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.base = 0x80000000UL,
+		.size = 0xff80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = vexpress64_mem_map;
+
+/* This function gets replaced by platforms supporting PCIe.
+ * The replacement function, eg. on Juno, initialises the PCIe bus.
+ */
+__weak void vexpress64_pcie_init(void)
+{
+}
+
+int board_init(void)
+{
+	vexpress64_pcie_init();
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+#ifdef PHYS_SDRAM_2
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Board specific ethernet initialization routine.
+ */
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC91111
+	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}