avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/arch/powerpc/cpu/mpc85xx/u-boot.lds

@@ -0,0 +1,128 @@
+/*
+ * Copyright 2007-2009, 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "config.h"
+
+#ifdef CONFIG_RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS	CONFIG_RESET_VECTOR_ADDRESS
+#else
+#define RESET_VECTOR_ADDRESS	0xfffffffc
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_MONITOR_LEN	0x80000
+#endif
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start_e500)
+
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .text      :
+  {
+    *(.text*)
+   } :text
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  } :text
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    KEEP(*(.got))
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data*)
+    *(.sdata*)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	KEEP(*(SORT(.u_boot_list*)));
+  }
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
+  .bootpg ADDR(.text) - 0x1000 :
+  {
+    KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
+  } :text = 0xffff
+  . = ADDR(.text) + CONFIG_SYS_MONITOR_LEN;
+#else
+  .bootpg RESET_VECTOR_ADDRESS - 0xffc :
+  {
+    arch/powerpc/cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec RESET_VECTOR_ADDRESS :
+  {
+    KEEP(*(.resetvec))
+  } :text = 0xffff
+
+  . = RESET_VECTOR_ADDRESS + 0x4;
+
+  /*
+   * Make sure that the bss segment isn't linked at 0x0, otherwise its
+   * address won't be updated during relocation fixups.  Note that
+   * this is a temporary fix.  Code to dynamically the fixup the bss
+   * location will be added in the future.  When the bss relocation
+   * fixup code is present this workaround should be removed.
+   */
+#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
+  . |= 0x10;
+#endif
+#endif
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss*)
+   *(.bss*)
+   *(COMMON)
+  } :bss
+
+  . = ALIGN(4);
+  __bss_end = . ;
+  PROVIDE (end = .);
+}