avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md
This commit is contained in:
2026-03-03 21:46:32 +02:00
parent fe3ba02c96
commit 68d74d3181
11967 changed files with 2221897 additions and 0 deletions

View File

@@ -0,0 +1,91 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __AG101_H
#define __AG101_H
/* Hardware register bases */
/* AHB Controller */
#define CONFIG_FTAHBC020S_BASE 0x90100000
/* Static Memory Controller (SRAM) */
#define CONFIG_FTSMC020_BASE 0x90200000
/* FTSDMC021 SDRAM Controller */
#define CONFIG_FTSDMC021_BASE 0x90300000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0x90400000
/* AHB-to-APB Bridge */
#define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
/* LCD Controller */
#define CONFIG_FTLCDC100_BASE 0x90600000
/* Reserved */
#define CONFIG_RESERVED_01_BASE 0x90700000
/* Reserved */
#define CONFIG_RESERVED_02_BASE 0x90800000
/* Ethernet */
#define CONFIG_FTMAC100_BASE 0x90900000
/* External USB host */
#define CONFIG_EXT_USB_HOST_BASE 0x90A00000
/* USB Device */
#define CONFIG_USB_DEV_BASE 0x90B00000
/* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
#define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
/* Reserved */
#define CONFIG_RESERVED_03_BASE 0x90D00000
/* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
#define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
/* External AHB slave1 (LCD) */
#define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
/* External AHB slave2 (FUSBH200) */
#define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
/* DEBUG LED */
#define CONFIG_DEBUG_LED 0x902FFFFC
/* APB Device definitions */
/* Power Management Unit */
#define CONFIG_FTPMU010_BASE 0x98100000
/* BT UART 2/IrDA (UART 01 in Linux) */
#define CONFIG_FTUART010_01_BASE 0x98300000
/* Counter/Timers */
#define CONFIG_FTTMR010_BASE 0x98400000
/* Watchdog Timer */
#define CONFIG_FTWDT010_BASE 0x98500000
/* Real Time Clock */
#define CONFIG_FTRTC010_BASE 0x98600000
/* GPIO */
#define CONFIG_FTGPIO010_BASE 0x98700000
/* Interrupt Controller */
#define CONFIG_FTINTC010_BASE 0x98800000
/* I2C */
#define CONFIG_FTIIC010_BASE 0x98A00000
/* Reserved */
#define CONFIG_RESERVED_04_BASE 0x98C00000
/* Compat Flash Controller */
#define CONFIG_FTCFC010_BASE 0x98D00000
/* SD Controller */
#define CONFIG_FTSDC010_BASE 0x98E00000
/* Synchronous Serial Port Controller (SSP) I2S/AC97 */
#define CONFIG_FTSSP010_02_BASE 0x99400000
/* ST UART ? SSP 02 (UART 02 in Linux) */
#define CONFIG_FTUART010_02_BASE 0x99600000
/* The following address was not defined in Linux */
/* FF UART 3 */
#define CONFIG_FTUART010_03_BASE 0x98200000
/* Synchronous Serial Port Controller (SSP) 01 */
#define CONFIG_FTSSP010_01_BASE 0x98B00000
/* IrDA */
#define CONFIG_IRDA_BASE 0x98900000
/* PWM - Pulse Width Modulator Controller */
#define CONFIG_PMW_BASE 0x99100000
#endif /* __AG101_H */

View File

@@ -0,0 +1,85 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __AG102_H
#define __AG102_H
/*
* Hardware register bases
*/
/* PCI Controller */
#define CONFIG_FTPCI100_BASE 0x90000000
/* LPC Controller */
#define CONFIG_LPC_IO_BASE 0x90100000
/* LPC Controller */
#define CONFIG_LPC_BASE 0x90200000
/* NDS32 Data Local Memory 01 */
#define CONFIG_NDS_DLM1_BASE 0x90300000
/* NDS32 Data Local Memory 02 */
#define CONFIG_NDS_DLM2_BASE 0x90400000
/* Synopsys DWC DDR2/1 Controller */
#define CONFIG_DWCDDR21MCTL_BASE 0x90500000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0x90600000
/* FTIDE020_S IDE (ATA) Controller */
#define CONFIG_FTIDE020S_BASE 0x90700000
/* USB OTG Controller */
#define CONFIG_FZOTG266HD0A_BASE 0x90800000
/* Andes L2 Cache Controller */
#define CONFIG_NCEL2C100_BASE 0x90900000
/* XGI XG22 GPU */
#define CONFIG_XGI_XG22_BASE 0x90A00000
/* GMAC Ethernet Controller */
#define CONFIG_FTGMAC100_BASE 0x90B00000
/* AHB Controller */
#define CONFIG_FTAHBC020S_BASE 0x90C00000
/* AHB-to-APB Bridge Controller */
#define CONFIG_FTAPBBRG020S_01_BASE 0x90D00000
/* External AHB2AHB Controller */
#define CONFIG_EXT_AHB2AHB_BASE 0x90E00000
/* Andes Multi-core Interrupt Controller */
#define CONFIG_NCEMIC100_BASE 0x90F00000
/*
* APB Device definitions
*/
/* Compat Flash Controller */
#define CONFIG_FTCFC010_BASE 0x94000000
/* APB - SSP (SPI) (without AC97) Controller */
#define CONFIG_FTSSP010_01_BASE 0x94100000
/* UART1 - APB STUART Controller (UART0 in Linux) */
#define CONFIG_FTUART010_01_BASE 0x94200000
/* FTSDC010 SD Controller */
#define CONFIG_FTSDC010_BASE 0x94400000
/* APB - SSP with HDA/AC97 Controller */
#define CONFIG_FTSSP010_02_BASE 0x94500000
/* UART2 - APB STUART Controller (UART1 in Linux) */
#define CONFIG_FTUART010_02_BASE 0x94600000
/* PCU Controller */
#define CONFIG_ANDES_PCU_BASE 0x94800000
/* FTTMR010 Timer */
#define CONFIG_FTTMR010_BASE 0x94900000
/* Watch Dog Controller */
#define CONFIG_FTWDT010_BASE 0x94A00000
/* FTRTC010 Real Time Clock */
#define CONFIG_FTRTC010_BASE 0x98B00000
/* GPIO Controller */
#define CONFIG_FTGPIO010_BASE 0x94C00000
/* I2C Controller */
#define CONFIG_FTIIC010_BASE 0x94E00000
/* PWM - Pulse Width Modulator Controller */
#define CONFIG_FTPWM010_BASE 0x94F00000
/* Debug LED */
#define CONFIG_DEBUG_LED 0x902FFFFC
/* Power Management Unit */
#define CONFIG_FTPMU010_BASE 0x98100000
#endif /* __AG102_H */

View File

@@ -0,0 +1,190 @@
/*
* Copyright 1995, Russell King.
* Various bits and pieces copyrights include:
* Linus Torvalds (test_bit).
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
*
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*
* Please note that the code in this file should never be included
* from user space. Many of these are not implemented in assembler
* since they would be too costly. Also, they require priviledged
* instructions (which are not available from user mode) to ensure
* that they are atomic.
*/
#ifndef __ASM_NDS_BITOPS_H
#define __ASM_NDS_BITOPS_H
#ifdef __KERNEL__
#include <asm/system.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/__ffs.h>
#define smp_mb__before_clear_bit() do { } while (0)
#define smp_mb__after_clear_bit() do { } while (0)
/*
* Function prototypes to keep gcc -Wall happy.
*/
extern void set_bit(int nr, void *addr);
static inline void __set_bit(int nr, void *addr)
{
int *a = (int *)addr;
int mask;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
*a |= mask;
}
extern void clear_bit(int nr, void *addr);
static inline void __clear_bit(int nr, void *addr)
{
int *a = (int *)addr;
int mask;
unsigned long flags;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
local_irq_save(flags);
*a &= ~mask;
local_irq_restore(flags);
}
extern void change_bit(int nr, void *addr);
static inline void __change_bit(int nr, void *addr)
{
int mask;
unsigned long *ADDR = (unsigned long *)addr;
ADDR += nr >> 5;
mask = 1 << (nr & 31);
*ADDR ^= mask;
}
extern int test_and_set_bit(int nr, void *addr);
static inline int __test_and_set_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a |= mask;
return retval;
}
extern int test_and_clear_bit(int nr, void *addr);
static inline int __test_and_clear_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a &= ~mask;
return retval;
}
extern int test_and_change_bit(int nr, void *addr);
static inline int __test_and_change_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a ^= mask;
return retval;
}
extern int find_first_zero_bit(void *addr, unsigned size);
extern int find_next_zero_bit(void *addr, int size, int offset);
/*
* This routine doesn't need to be atomic.
*/
static inline int test_bit(int nr, const void *addr)
{
return ((unsigned char *) addr)[nr >> 3] & (1U << (nr & 7));
}
/*
* ffz = Find First Zero in word. Undefined if no zero exists,
* so code should check against ~0UL first..
*/
static inline unsigned long ffz(unsigned long word)
{
int k;
word = ~word;
k = 31;
if (word & 0x0000ffff) {
k -= 16; word <<= 16;
}
if (word & 0x00ff0000) {
k -= 8; word <<= 8;
}
if (word & 0x0f000000) {
k -= 4; word <<= 4;
}
if (word & 0x30000000) {
k -= 2; word <<= 2;
}
if (word & 0x40000000)
k -= 1;
return k;
}
/*
* ffs: find first bit set. This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
/*
* redefined in include/linux/bitops.h
* #define ffs(x) generic_ffs(x)
*/
/*
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
*/
#define hweight32(x) generic_hweight32(x)
#define hweight16(x) generic_hweight16(x)
#define hweight8(x) generic_hweight8(x)
#define ext2_set_bit test_and_set_bit
#define ext2_clear_bit test_and_clear_bit
#define ext2_test_bit test_bit
#define ext2_find_first_zero_bit find_first_zero_bit
#define ext2_find_next_zero_bit find_next_zero_bit
/* Bitmap functions for the minix filesystem. */
#define minix_test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
#define minix_set_bit(nr, addr) set_bit(nr, addr)
#define minix_test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
#define minix_test_bit(nr, addr) test_bit(nr, addr)
#define minix_find_first_zero_bit(addr, size) find_first_zero_bit(addr, size)
#endif /* __KERNEL__ */
#endif /* __ASM_NDS_BITOPS_H */

View File

@@ -0,0 +1,36 @@
/*
* linux/include/asm-arm/byteorder.h
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* ARM Endian-ness. In little endian mode, the data bus is connected such
* that byte accesses appear as:
* 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
* and word accesses (data or instruction) appear as:
* d0...d31
*
* When in big endian mode, byte accesses appear as:
* 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
* and word accesses (data or instruction) appear as:
* d0...d31
*/
#ifndef __ASM_NDS_BYTEORDER_H
#define __ASM_NDS_BYTEORDER_H
#include <asm/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
#endif
#ifdef __NDSEB__
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
#endif
#endif

View File

@@ -0,0 +1,49 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_CACHE_H
#define _ASM_CACHE_H
/* cache */
int icache_status(void);
void icache_enable(void);
void icache_disable(void);
int dcache_status(void);
void dcache_enable(void);
void dcache_disable(void);
#define DEFINE_GET_SYS_REG(reg) \
static inline unsigned long GET_##reg(void) \
{ \
unsigned long val; \
__asm__ volatile ( \
"mfsr %0, $"#reg : "=&r" (val) : : "memory" \
); \
return val; \
}
enum cache_t {ICACHE, DCACHE};
DEFINE_GET_SYS_REG(ICM_CFG);
DEFINE_GET_SYS_REG(DCM_CFG);
#define ICM_CFG_OFF_ISZ 6 /* I-cache line size */
#define ICM_CFG_MSK_ISZ (0x7UL << ICM_CFG_OFF_ISZ)
#define DCM_CFG_OFF_DSZ 6 /* D-cache line size */
#define DCM_CFG_MSK_DSZ (0x7UL << DCM_CFG_OFF_DSZ)
/*
* The current upper bound for NDS32 L1 data cache line sizes is 32 bytes.
* We use that value for aligning DMA buffers unless the board config has
* specified an alternate cache line size.
*/
#ifdef CONFIG_SYS_CACHELINE_SIZE
#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
#else
#define ARCH_DMA_MINALIGN 32
#endif
#endif /* _ASM_CACHE_H */

View File

@@ -0,0 +1,14 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
#define CONFIG_NEEDS_MANUAL_RELOC
#endif

View File

@@ -0,0 +1,33 @@
/*
* Copyright (C) 2013 Andes Technology Corporation
* Ken Kuo, Andes Technology Corporation <ken_kuo@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_NDS_DMA_MAPPING_H
#define __ASM_NDS_DMA_MAPPING_H
enum dma_data_direction {
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
};
static void *dma_alloc_coherent(size_t len, unsigned long *handle)
{
*handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
return (void *)*handle;
}
static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
enum dma_data_direction dir)
{
return (unsigned long)vaddr;
}
static inline void dma_unmap_single(volatile void *vaddr, size_t len,
unsigned long paddr)
{
}
#endif /* __ASM_NDS_DMA_MAPPING_H */

View File

@@ -0,0 +1 @@
#include <asm-generic/errno.h>

View File

@@ -0,0 +1,34 @@
/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/**************************************************************
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - so far no one uses the macros defined in this head file.
**************************************************************/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
/* Architecture-specific global data */
struct arch_global_data {
};
#include <asm-generic/global_data.h>
#ifdef CONFIG_GLOBAL_DATA_NOT_REG10
extern volatile gd_t g_gd;
#define DECLARE_GLOBAL_DATA_PTR static volatile gd_t *gd = &g_gd
#else
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("$r10")
#endif
#endif /* __ASM_GBL_DATA_H */

View File

@@ -0,0 +1,497 @@
/*
* linux/include/asm-nds/io.h
*
* Copyright (C) 1996-2000 Russell King
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0
*
* Modifications:
* 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both
* constant addresses and variable addresses.
* 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture
* specific IO header files.
* 27-Mar-1999 PJB Second parameter of memcpy_toio is const..
* 04-Apr-1999 PJB Added check_signature.
* 12-Dec-1999 RMK More cleanups
* 18-Jun-2000 RMK Removed virt_to_* and friends definitions
*/
#ifndef __ASM_NDS_IO_H
#define __ASM_NDS_IO_H
/*
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - cmd_pci.c, cmd_scsi.c, Lynxkdi.c, usb.c, usb_storage.c, etc...
* iinclude asm/io.h
*/
#ifdef __KERNEL__
#include <linux/types.h>
#include <asm/byteorder.h>
static inline void sync(void)
{
}
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
* properties specified by "flags".
*/
#define MAP_NOCACHE (0)
#define MAP_WRCOMBINE (0)
#define MAP_WRBACK (0)
#define MAP_WRTHROUGH (0)
static inline void *
map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
{
return (void *)paddr;
}
/*
* Take down a mapping set up by map_physmem().
*/
static inline void unmap_physmem(void *vaddr, unsigned long flags)
{
}
static inline phys_addr_t virt_to_phys(void *vaddr)
{
return (phys_addr_t)(vaddr);
}
/*
* Generic virtual read/write. Note that we don't support half-word
* read/writes. We define __arch_*[bl] here, and leave __arch_*w
* to the architecture specific code.
*/
#define __arch_getb(a) (*(unsigned char *)(a))
#define __arch_getw(a) (*(unsigned short *)(a))
#define __arch_getl(a) (*(unsigned int *)(a))
#define __arch_putb(v, a) (*(unsigned char *)(a) = (v))
#define __arch_putw(v, a) (*(unsigned short *)(a) = (v))
#define __arch_putl(v, a) (*(unsigned int *)(a) = (v))
extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
extern void __raw_readsl(unsigned int addr, void *data, int longlen);
#define __raw_writeb(v, a) __arch_putb(v, a)
#define __raw_writew(v, a) __arch_putw(v, a)
#define __raw_writel(v, a) __arch_putl(v, a)
#define __raw_readb(a) __arch_getb(a)
#define __raw_readw(a) __arch_getw(a)
#define __raw_readl(a) __arch_getl(a)
/*
* TODO: The kernel offers some more advanced versions of barriers, it might
* have some advantages to use them instead of the simple one here.
*/
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#define __iormb() dmb()
#define __iowmb() dmb()
static inline void writeb(unsigned char val, unsigned char *addr)
{
__iowmb();
__arch_putb(val, addr);
}
static inline void writew(unsigned short val, unsigned short *addr)
{
__iowmb();
__arch_putw(val, addr);
}
static inline void writel(unsigned int val, unsigned int *addr)
{
__iowmb();
__arch_putl(val, addr);
}
static inline unsigned char readb(unsigned char *addr)
{
u8 val;
val = __arch_getb(addr);
__iormb();
return val;
}
static inline unsigned short readw(unsigned short *addr)
{
u16 val;
val = __arch_getw(addr);
__iormb();
return val;
}
static inline unsigned int readl(unsigned int *addr)
{
u32 val;
val = __arch_getl(addr);
__iormb();
return val;
}
/*
* The compiler seems to be incapable of optimising constants
* properly. Spell it out to the compiler in some cases.
* These are only valid for small values of "off" (< 1<<12)
*/
#define __raw_base_writeb(val, base, off) __arch_base_putb(val, base, off)
#define __raw_base_writew(val, base, off) __arch_base_putw(val, base, off)
#define __raw_base_writel(val, base, off) __arch_base_putl(val, base, off)
#define __raw_base_readb(base, off) __arch_base_getb(base, off)
#define __raw_base_readw(base, off) __arch_base_getw(base, off)
#define __raw_base_readl(base, off) __arch_base_getl(base, off)
#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
#define out_le32(a, v) out_arch(l, le32, a, v)
#define out_le16(a, v) out_arch(w, le16, a, v)
#define in_le32(a) in_arch(l, le32, a)
#define in_le16(a) in_arch(w, le16, a)
#define out_be32(a, v) out_arch(l, be32, a, v)
#define out_be16(a, v) out_arch(w, be16, a, v)
#define in_be32(a) in_arch(l, be32, a)
#define in_be16(a) in_arch(w, be16, a)
#define out_8(a, v) __raw_writeb(v, a)
#define in_8(a) __raw_readb(a)
/*
* Clear and set bits in one shot. These macros can be used to clear and
* set multiple bits in a register using a single call. These macros can
* also be used to set a multiple-bit bit pattern using a mask, by
* specifying the mask in the 'clear' parameter and the new bit pattern
* in the 'set' parameter.
*/
#define clrbits(type, addr, clear) \
out_##type((addr), in_##type(addr) & ~(clear))
#define setbits(type, addr, set) \
out_##type((addr), in_##type(addr) | (set))
#define clrsetbits(type, addr, clear, set) \
out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
#define setbits_be32(addr, set) setbits(be32, addr, set)
#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
#define setbits_le32(addr, set) setbits(le32, addr, set)
#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
#define setbits_be16(addr, set) setbits(be16, addr, set)
#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
#define setbits_le16(addr, set) setbits(le16, addr, set)
#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
#define clrbits_8(addr, clear) clrbits(8, addr, clear)
#define setbits_8(addr, set) setbits(8, addr, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
/*
* Now, pick up the machine-defined IO definitions
* #include <asm/arch/io.h>
*/
/*
* IO port access primitives
* -------------------------
*
* The NDS32 doesn't have special IO access instructions just like ARM;
* all IO is memory mapped.
* Note that these are defined to perform little endian accesses
* only. Their primary purpose is to access PCI and ISA peripherals.
*
* Note that for a big endian machine, this implies that the following
* big endian mode connectivity is in place, as described by numerious
* ARM documents:
*
* PCI: D0-D7 D8-D15 D16-D23 D24-D31
* ARM: D24-D31 D16-D23 D8-D15 D0-D7
*
* The machine specific io.h include defines __io to translate an "IO"
* address to a memory address.
*
* Note that we prevent GCC re-ordering or caching values in expressions
* by introducing sequence points into the in*() definitions. Note that
* __raw_* do not guarantee this behaviour.
*
* The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
*/
#ifdef __io
#define outb(v, p) __raw_writeb(v, __io(p))
#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
#define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
#define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
#define outsb(p, d, l) writesb(__io(p), d, l)
#define outsw(p, d, l) writesw(__io(p), d, l)
#define outsl(p, d, l) writesl(__io(p), d, l)
#define insb(p, d, l) readsb(__io(p), d, l)
#define insw(p, d, l) readsw(__io(p), d, l)
#define insl(p, d, l) readsl(__io(p), d, l)
static inline void readsb(unsigned int *addr, void * data, int bytelen)
{
unsigned char *ptr = (unsigned char *)addr;
unsigned char *ptr2 = (unsigned char *)data;
while (bytelen) {
*ptr2 = *ptr;
ptr2++;
bytelen--;
}
}
static inline void readsw(unsigned int *addr, void * data, int wordlen)
{
unsigned short *ptr = (unsigned short *)addr;
unsigned short *ptr2 = (unsigned short *)data;
while (wordlen) {
*ptr2 = *ptr;
ptr2++;
wordlen--;
}
}
static inline void readsl(unsigned int *addr, void * data, int longlen)
{
unsigned int *ptr = (unsigned int *)addr;
unsigned int *ptr2 = (unsigned int *)data;
while (longlen) {
*ptr2 = *ptr;
ptr2++;
longlen--;
}
}
static inline void writesb(unsigned int *addr, const void * data, int bytelen)
{
unsigned char *ptr = (unsigned char *)addr;
unsigned char *ptr2 = (unsigned char *)data;
while (bytelen) {
*ptr = *ptr2;
ptr2++;
bytelen--;
}
}
static inline void writesw(unsigned int *addr, const void * data, int wordlen)
{
unsigned short *ptr = (unsigned short *)addr;
unsigned short *ptr2 = (unsigned short *)data;
while (wordlen) {
*ptr = *ptr2;
ptr2++;
wordlen--;
}
}
static inline void writesl(unsigned int *addr, const void * data, int longlen)
{
unsigned int *ptr = (unsigned int *)addr;
unsigned int *ptr2 = (unsigned int *)data;
while (longlen) {
*ptr = *ptr2;
ptr2++;
longlen--;
}
}
#endif
#define outb_p(val, port) outb((val), (port))
#define outw_p(val, port) outw((val), (port))
#define outl_p(val, port) outl((val), (port))
#define inb_p(port) inb((port))
#define inw_p(port) inw((port))
#define inl_p(port) inl((port))
#define outsb_p(port, from, len) outsb(port, from, len)
#define outsw_p(port, from, len) outsw(port, from, len)
#define outsl_p(port, from, len) outsl(port, from, len)
#define insb_p(port, to, len) insb(port, to, len)
#define insw_p(port, to, len) insw(port, to, len)
#define insl_p(port, to, len) insl(port, to, len)
/*
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
* linux/Documentation/IO-mapping.txt. If you want a
* physical address, use __ioremap instead.
*/
extern void *__ioremap(unsigned long offset, size_t size, unsigned long flags);
extern void __iounmap(void *addr);
/*
* Generic ioremap support.
*
* Define:
* iomem_valid_addr(off,size)
* iomem_to_phys(off)
*/
#ifdef iomem_valid_addr
#define __arch_ioremap(off, sz, nocache) \
({ \
unsigned long _off = (off), _size = (sz); \
void *_ret = (void *)0; \
if (iomem_valid_addr(_off, _size)) \
_ret = __ioremap(iomem_to_phys(_off), _size, 0); \
_ret; \
})
#define __arch_iounmap __iounmap
#endif
#define ioremap(off, sz) __arch_ioremap((off), (sz), 0)
#define ioremap_nocache(off, sz) __arch_ioremap((off), (sz), 1)
#define iounmap(_addr) __arch_iounmap(_addr)
/*
* DMA-consistent mapping functions. These allocate/free a region of
* uncached, unwrite-buffered mapped memory space for use with DMA
* devices. This is the "generic" version. The PCI specific version
* is in pci.h
*/
extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
extern void consistent_sync(void *vaddr, size_t size, int rw);
/*
* String version of IO memory access ops:
*/
extern void _memcpy_fromio(void *, unsigned long, size_t);
extern void _memcpy_toio(unsigned long, const void *, size_t);
extern void _memset_io(unsigned long, int, size_t);
extern void __readwrite_bug(const char *fn);
/*
* If this architecture has PCI memory IO, then define the read/write
* macros. These should only be used with the cookie passed from
* ioremap.
*/
#ifdef __mem_pci
#define readb(c) ({ unsigned int __v = \
__raw_readb(__mem_pci(c)); __v; })
#define readw(c) ({ unsigned int __v = \
le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
#define readl(c) ({ unsigned int __v = \
le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
#define writeb(v, c) __raw_writeb(v, __mem_pci(c))
#define writew(v, c) __raw_writew(cpu_to_le16(v), __mem_pci(c))
#define writel(v, c) __raw_writel(cpu_to_le32(v), __mem_pci(c))
#define memset_io(c, v, l) _memset_io(__mem_pci(c), (v), (l))
#define memcpy_fromio(a, c, l) _memcpy_fromio((a), __mem_pci(c), (l))
#define memcpy_toio(c, a, l) _memcpy_toio(__mem_pci(c), (a), (l))
#define eth_io_copy_and_sum(s, c, l, b) \
eth_copy_and_sum((s), __mem_pci(c), (l), (b))
static inline int
check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
{
int retval = 0;
do {
if (readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
#endif /* __mem_pci */
/*
* If this architecture has ISA IO, then define the isa_read/isa_write
* macros.
*/
#ifdef __mem_isa
#define isa_readb(addr) __raw_readb(__mem_isa(addr))
#define isa_readw(addr) __raw_readw(__mem_isa(addr))
#define isa_readl(addr) __raw_readl(__mem_isa(addr))
#define isa_writeb(val, addr) __raw_writeb(val, __mem_isa(addr))
#define isa_writew(val, addr) __raw_writew(val, __mem_isa(addr))
#define isa_writel(val, addr) __raw_writel(val, __mem_isa(addr))
#define isa_memset_io(a, b, c) _memset_io(__mem_isa(a), (b), (c))
#define isa_memcpy_fromio(a, b, c) _memcpy_fromio((a), __mem_isa(b), (c))
#define isa_memcpy_toio(a, b, c) _memcpy_toio(__mem_isa((a)), (b), (c))
#define isa_eth_io_copy_and_sum(a, b, c, d) \
eth_copy_and_sum((a), __mem_isa(b), (c), (d))
static inline int
isa_check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
{
int retval = 0;
do {
if (isa_readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
#else /* __mem_isa */
#define isa_readb(addr) (__readwrite_bug("isa_readb"), 0)
#define isa_readw(addr) (__readwrite_bug("isa_readw"), 0)
#define isa_readl(addr) (__readwrite_bug("isa_readl"), 0)
#define isa_writeb(val, addr) __readwrite_bug("isa_writeb")
#define isa_writew(val, addr) __readwrite_bug("isa_writew")
#define isa_writel(val, addr) __readwrite_bug("isa_writel")
#define isa_memset_io(a, b, c) __readwrite_bug("isa_memset_io")
#define isa_memcpy_fromio(a, b, c) __readwrite_bug("isa_memcpy_fromio")
#define isa_memcpy_toio(a, b, c) __readwrite_bug("isa_memcpy_toio")
#define isa_eth_io_copy_and_sum(a, b, c, d) \
__readwrite_bug("isa_eth_io_copy_and_sum")
#define isa_check_signature(io, sig, len) (0)
#endif /* __mem_isa */
#endif /* __KERNEL__ */
#endif /* __ASM_NDS_IO_H */

View File

@@ -0,0 +1,12 @@
/*
* U-Boot - linkage.h
*
* Copyright (c) 2005-2007 Analog Devices Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
#endif

View File

@@ -0,0 +1,29 @@
/*
* This was automagically generated from arch/nds/tools/mach-types!
* Do NOT edit
*/
#ifndef __ASM_NDS32_MACH_TYPE_H
#define __ASM_NDS32_MACH_TYPE_H
#ifndef __ASSEMBLY__
/* The type of machine we're running on */
extern unsigned int __machine_arch_type;
#endif
/* see arch/arm/kernel/arch.c for a description of these */
#define MACH_TYPE_ADPAG101P 1
#ifdef CONFIG_ARCH_ADPAG101P
# ifdef machine_arch_type
# undef machine_arch_type
# define machine_arch_type __machine_arch_type
# else
# define machine_arch_type MACH_TYPE_ADPAG101P
# endif
# define machine_is_adpag101p() (machine_arch_type == MACH_TYPE_ADPAG101P)
#else
# define machine_is_adpag101p() (1)
#endif
#endif /* __ASM_NDS32_MACH_TYPE_H */

View File

@@ -0,0 +1,80 @@
/*
* include/asm-nds32/macro.h
*
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_NDS_MACRO_H
#define __ASM_NDS_MACRO_H
#ifdef __ASSEMBLY__
/*
* These macros provide a convenient way to write 8, 16 and 32 bit data
* to an "immediate address (address used by periphal)" only.
* Registers r4 and r5 are used, any data in these registers are
* overwritten by the macros.
* The macros are valid for any NDS32 architecture, they do not implement
* any memory barriers so caution is recommended when using these when the
* caches are enabled or on a multi-core system.
*/
.macro write32, addr, data
li $r4, \addr
li $r5, \data
swi $r5, [$r4]
.endm
.macro write16, addr, data
li $r4, \addr
li $r5, \data
shi $r5, [$r4]
.endm
.macro write8, addr, data
li $r4, \addr
li $r5, \data
sbi $r5, [$r4]
.endm
/*
* This macro read a value from a register, then do OR operation
* (set bit fields) to the value, and then store it back to the register.
* Note: Instruction 'ori' supports immediate value up to 15 bits.
*/
.macro setbf32, addr, data
li $r4, \addr
lwi $r5, [$r4]
li $r6, \data
or $r5, $r5, $r6
swi $r5, [$r4]
.endm
.macro setbf15, addr, data
li $r4, \addr
lwi $r5, [$r4]
ori $r5, $r5, \data
swi $r5, [$r4]
.endm
/*
* This macro generates a loop that can be used for delays in the code.
* Register r4 is used, any data in this register is overwritten by the
* macro.
* The macro is valid for any NDS32 architeture. The actual time spent in the
* loop will vary from CPU to CPU though.
*/
.macro wait_timer, time
li $r4, \time
1:
nop
addi $r4, $r4, -1
bnez $r4, 1b
.endm
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H */

View File

@@ -0,0 +1,88 @@
/*
* linux/include/asm-arm/posix_types.h
*
* Copyright (C) 1996-1998 Russell King.
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 27-06-1996 RMK Created
* 05-03-2010 Modified for arch NDS32
*/
#ifndef __ARCH_NDS_POSIX_TYPES_H
#define __ARCH_NDS_POSIX_TYPES_H
/*
* This file is generally used by user-level software, so you need to
* be a little careful about namespace pollution etc. Also, we cannot
* assume GCC is being used.
*/
typedef unsigned short __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
typedef unsigned short __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
#ifdef __GNUC__
typedef __SIZE_TYPE__ __kernel_size_t;
#else
typedef unsigned int __kernel_size_t;
#endif
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
typedef int __kernel_daddr_t;
typedef char *__kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
typedef unsigned short __kernel_gid16_t;
typedef unsigned int __kernel_uid32_t;
typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif
typedef struct {
#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
int __val[2];
#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#undef __FD_SET
#define __FD_SET(fd, fdsetp) \
(((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31)))
#undef __FD_CLR
#define __FD_CLR(fd, fdsetp) \
(((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31)))
#undef __FD_ISSET
#define __FD_ISSET(fd, fdsetp) \
((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0)
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) \
(memset(fdsetp, 0, sizeof(*(fd_set *) fdsetp)))
#endif
#endif /* __ARCH_NDS_POSIX_TYPES_H */

View File

@@ -0,0 +1,25 @@
/*
* linux/include/asm-arm/processor.h
*
* Copyright (C) 1995-2002 Russell King
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_NDS_PROCESSOR_H
#define __ASM_NDS_PROCESSOR_H
/**************************************************************
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - so far some files include /asm/processor.h, but
* no one uses the macros defined in this head file.
**************************************************************/
#endif /* __ASM_ARM_PROCESSOR_H */

View File

@@ -0,0 +1,90 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_NDS_PTRACE_H
#define __ASM_NDS_PTRACE_H
#define USR_MODE 0x00
#define SU_MODE 0x01
#define HV_MODE 0x10
#define MODE_MASK (0x03<<3)
#define GIE_BIT 0x01
#ifndef __ASSEMBLY__
/* this struct defines the way the registers are stored on the
stack during a system call. */
#define NDS32_REG long
struct pt_regs {
NDS32_REG ir0;
NDS32_REG ipsw;
NDS32_REG ipc;
NDS32_REG sp;
NDS32_REG orig_r0;
NDS32_REG pipsw;
NDS32_REG pipc;
NDS32_REG pp0;
NDS32_REG pp1;
NDS32_REG d0hi;
NDS32_REG d0lo;
NDS32_REG d1hi;
NDS32_REG d1lo;
NDS32_REG r[26]; /* r0 - r25 */
NDS32_REG p0; /* r26 - used by OS */
NDS32_REG p1; /* r27 - used by OS */
NDS32_REG fp; /* r28 */
NDS32_REG gp; /* r29 */
NDS32_REG lp; /* r30 */
NDS32_REG fucop_ctl;
NDS32_REG osp;
};
#define processor_mode(regs) \
(((regs)->ipsw & MODE_MASK) >> 3)
#define interrupts_enabled(regs) \
((regs)->ipsw & GIE_BIT)
/*
* Offsets used by 'ptrace' system call interface.
* These can't be changed without breaking binary compatibility
* with MkLinux, etc.
*/
#define PT_R0 0
#define PT_R1 1
#define PT_R2 2
#define PT_R3 3
#define PT_R4 4
#define PT_R5 5
#define PT_R6 6
#define PT_R7 7
#define PT_R8 8
#define PT_R9 9
#define PT_R10 10
#define PT_R11 11
#define PT_R12 12
#define PT_R13 13
#define PT_R14 14
#define PT_R15 15
#define PT_R16 16
#define PT_R17 17
#define PT_R18 18
#define PT_R19 19
#define PT_R20 20
#define PT_R21 21
#define PT_R22 22
#define PT_R23 23
#define PT_R24 24
#define PT_R25 25
#endif /* __ASSEMBLY__ */
#endif /* __ASM_NDS_PTRACE_H */

View File

@@ -0,0 +1,11 @@
/*
* Copyright (c) 2012 The Chromium OS Authors.
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_NDS32_SECTIONS_H
#define __ASM_NDS32_SECTIONS_H
#include <asm-generic/sections.h>
#endif

View File

@@ -0,0 +1,190 @@
/*
* linux/arch/nds32/include/asm/setup.h
*
* Copyright (C) 1997-1999 Russell King
* Copyright (C) 2008 Andes Technology Corporation
* Copyright (C) 2013 Ken Kuo (ken_kuo@andestech.com)
*
* SPDX-License-Identifier: GPL-2.0
*
* Structure passed to kernel to tell it about the
* hardware it's running on. See Documentation/arm/Setup
* for more info.
*/
#ifndef __ASMNDS32_SETUP_H
#define __ASMNDS32_SETUP_H
#define COMMAND_LINE_SIZE 256
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
struct tag_header {
u32 size;
u32 tag;
};
/* The list must start with an ATAG_CORE node */
#define ATAG_CORE 0x54410001
struct tag_core {
u32 flags; /* bit 0 = read-only */
u32 pagesize;
u32 rootdev;
};
/* it is allowed to have multiple ATAG_MEM nodes */
#define ATAG_MEM 0x54410002
struct tag_mem32 {
u32 size;
u32 start; /* physical start address */
};
/* VGA text type displays */
#define ATAG_VIDEOTEXT 0x54410003
struct tag_videotext {
u8 x;
u8 y;
u16 video_page;
u8 video_mode;
u8 video_cols;
u16 video_ega_bx;
u8 video_lines;
u8 video_isvga;
u16 video_points;
};
/* describes how the ramdisk will be used in kernel */
#define ATAG_RAMDISK 0x54410004
struct tag_ramdisk {
u32 flags; /* bit 0 = load, bit 1 = prompt */
u32 size; /* decompressed ramdisk size in _kilo_ bytes */
u32 start; /* starting block of floppy-based RAM disk image */
};
/*
* this one accidentally used virtual addresses - as such,
* it's deprecated.
* describes where the compressed ramdisk image lives (virtual address)
*/
#define ATAG_INITRD 0x54410005
/* describes where the compressed ramdisk image lives (physical address) */
#define ATAG_INITRD2 0x54420005
struct tag_initrd {
u32 start; /* physical start address */
u32 size; /* size of compressed ramdisk image in bytes */
};
/* board serial number. "64 bits should be enough for everybody" */
#define ATAG_SERIAL 0x54410006
struct tag_serialnr {
u32 low;
u32 high;
};
/* board revision */
#define ATAG_REVISION 0x54410007
struct tag_revision {
u32 rev;
};
/* initial values for vesafb-type framebuffers. see struct screen_info
* in include/linux/tty.h
*/
#define ATAG_VIDEOLFB 0x54410008
struct tag_videolfb {
u16 lfb_width;
u16 lfb_height;
u16 lfb_depth;
u16 lfb_linelength;
u32 lfb_base;
u32 lfb_size;
u8 red_size;
u8 red_pos;
u8 green_size;
u8 green_pos;
u8 blue_size;
u8 blue_pos;
u8 rsvd_size;
u8 rsvd_pos;
};
/* command line: \0 terminated string */
#define ATAG_CMDLINE 0x54410009
struct tag_cmdline {
char cmdline[COMMAND_LINE_SIZE];
};
struct tag {
struct tag_header hdr;
union {
struct tag_core core;
struct tag_mem32 mem;
struct tag_videotext videotext;
struct tag_ramdisk ramdisk;
struct tag_initrd initrd;
struct tag_serialnr serialnr;
struct tag_revision revision;
struct tag_videolfb videolfb;
struct tag_cmdline cmdline;
} u;
};
struct tagtable {
u32 tag;
int (*parse)(const struct tag *);
};
#define tag_member_present(tag, member) \
((unsigned long)(&((struct tag *)0L)->member + 1) \
<= (tag)->hdr.size * 4)
#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
#define for_each_tag(t, base) \
for (t = base; t->hdr.size; t = tag_next(t))
#ifdef __KERNEL__
#define __tag __used __attribute__((__section__(".taglist")))
#define __tagtable(tag, fn) \
static struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
#define NR_BANKS 8
struct meminfo {
int nr_banks;
struct {
unsigned long start;
unsigned long size;
int node;
} bank[NR_BANKS];
};
/*
* Early command line parameters.
*/
struct early_params {
const char *arg;
void (*fn)(char **p);
};
#define __early_param(name, fn) \
static struct early_params __early_##fn __used \
__attribute__((__section__("__early_param"))) = { name, fn }
#endif
#endif

View File

@@ -0,0 +1,57 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef __ASM_NDS_STRING_H
#define __ASM_NDS_STRING_H
/*
* We don't do inline string functions, since the
* optimised inline asm versions are not small.
*/
#undef __HAVE_ARCH_STRRCHR
extern char *strrchr(const char *s, int c);
#undef __HAVE_ARCH_STRCHR
extern char *strchr(const char *s, int c);
#undef __HAVE_ARCH_MEMCPY
extern void *memcpy(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMMOVE
extern void *memmove(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMCHR
extern void *memchr(const void *, int, __kernel_size_t);
#undef __HAVE_ARCH_MEMZERO
#undef __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
#ifdef CONFIG_MARCO_MEMSET
extern void __memzero(void *ptr, __kernel_size_t n);
#define memset(p, v, n) \
({ \
if ((n) != 0) { \
if (__builtin_constant_p((v)) && (v) == 0) \
__memzero((p), (n)); \
else \
memset((p), (v), (n)); \
} \
(p); \
})
#define memzero(p, n) ({ if ((n) != 0) __memzero((p), (n)); (p); })
#else
extern void memzero(void *ptr, __kernel_size_t n);
#endif
#endif /* __ASM_NDS_STRING_H */

View File

@@ -0,0 +1,72 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_NDS_SYSTEM_H
#define __ASM_NDS_SYSTEM_H
/*
* Interrupt configuring macros.
*/
extern int irq_flags;
#define local_irq_enable() \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.e\n\t" \
: \
: "r" (irq_flags) \
)
#define local_irq_disable() \
do { \
int __tmp_dummy; \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.d\n\t" \
"dsb\n\t" \
: "=r" (__tmp_dummy) \
); \
} while (0)
#define local_irq_save(x) \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.d\n\t" \
"dsb\n\t" \
: "=&r" (x) \
)
#define local_save_flags(x) \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.e\n\t" \
"setgie.d\n\t" \
: "=r" (x) \
)
#define irqs_enabled_from_flags(x) ((x) != 0x1f)
#define local_irq_restore(x) \
do { \
if (irqs_enabled_from_flags(x)) \
local_irq_enable(); \
} while (0)
/*
* Force strict CPU ordering.
*/
#define nop() asm volatile ("nop;\n\t" : : )
#define mb() asm volatile ("" : : : "memory")
#define rmb() asm volatile ("" : : : "memory")
#define wmb() asm volatile ("" : : : "memory")
#endif /* __ASM_NDS_SYSTEM_H */

View File

@@ -0,0 +1,63 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef __ASM_NDS_TYPES_H
#define __ASM_NDS_TYPES_H
typedef unsigned short umode_t;
/*
* __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
* header files exported to user space
*/
typedef __signed__ char __s8;
typedef unsigned char __u8;
typedef __signed__ short __s16;
typedef unsigned short __u16;
typedef __signed__ int __s32;
typedef unsigned int __u32;
#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
typedef __signed__ long long __s64;
typedef unsigned long long __u64;
#endif
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
typedef signed char s8;
typedef unsigned char u8;
typedef signed short s16;
typedef unsigned short u16;
typedef signed int s32;
typedef unsigned int u32;
typedef signed long long s64;
typedef unsigned long long u64;
#define BITS_PER_LONG 32
#include <stddef.h>
typedef u32 dma_addr_t;
typedef unsigned long phys_addr_t;
typedef unsigned long phys_size_t;
#endif /* __KERNEL__ */
#endif

View File

@@ -0,0 +1,29 @@
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _U_BOOT_NDS32_H_
#define _U_BOOT_NDS32_H_ 1
/* for the following variables, see start.S */
extern ulong IRQ_STACK_START; /* top of IRQ stack */
extern ulong FIQ_STACK_START; /* top of FIQ stack */
/* cpu/.../cpu.c */
int cleanup_before_linux(void);
/* board/.../... */
int board_init(void);
/* cpu/.../interrupt.c */
void reset_timer_masked(void);
#endif /* _U_BOOT_NDS32_H_ */

View File

@@ -0,0 +1,45 @@
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* SPDX-License-Identifier: GPL-2.0+
*
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
#include <environment.h>
typedef struct bd_info {
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
unsigned long bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned char bi_enetaddr[6];
struct /* RAM configuration */
{
unsigned long start;
unsigned long size;
} bi_dram[CONFIG_NR_DRAM_BANKS];
} bd_t;
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_NDS32
#endif /* _U_BOOT_H_ */

View File

@@ -0,0 +1 @@
#include <asm-generic/unaligned.h>