avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/arch/arm/mach-keystone/include/mach/ddr3.h

@@ -0,0 +1,71 @@
+/*
+ * DDR3
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _DDR3_H_
+#define _DDR3_H_
+
+#include <asm/arch/hardware.h>
+
+struct ddr3_phy_config {
+	unsigned int pllcr;
+	unsigned int pgcr1_mask;
+	unsigned int pgcr1_val;
+	unsigned int ptr0;
+	unsigned int ptr1;
+	unsigned int ptr2;
+	unsigned int ptr3;
+	unsigned int ptr4;
+	unsigned int dcr_mask;
+	unsigned int dcr_val;
+	unsigned int dtpr0;
+	unsigned int dtpr1;
+	unsigned int dtpr2;
+	unsigned int mr0;
+	unsigned int mr1;
+	unsigned int mr2;
+	unsigned int dtcr;
+	unsigned int pgcr2;
+	unsigned int zq0cr1;
+	unsigned int zq1cr1;
+	unsigned int zq2cr1;
+	unsigned int pir_v1;
+	unsigned int pir_v2;
+};
+
+struct ddr3_emif_config {
+	unsigned int sdcfg;
+	unsigned int sdtim1;
+	unsigned int sdtim2;
+	unsigned int sdtim3;
+	unsigned int sdtim4;
+	unsigned int zqcfg;
+	unsigned int sdrfc;
+};
+
+struct ddr3_spd_cb {
+	char   dimm_name[32];
+	struct ddr3_phy_config phy_cfg;
+	struct ddr3_emif_config emif_cfg;
+	unsigned int ddrspdclock;
+	int    ddr_size_gbyte;
+};
+
+u32 ddr3_init(void);
+void ddr3_reset_ddrphy(void);
+void ddr3_init_ecc(u32 base, u32 ddr3_size);
+void ddr3_disable_ecc(u32 base);
+void ddr3_check_ecc_int(u32 base);
+int ddr3_ecc_support_rmw(u32 base);
+void ddr3_err_reset_workaround(void);
+void ddr3_enable_ecc(u32 base, int test);
+void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
+void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
+int ddr3_get_size(void);
+
+#endif