avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/arch/arm/mach-exynos/common_setup.h

@@ -0,0 +1,107 @@
+/*
+ * Common APIs for EXYNOS based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/system.h>
+
+#define DMC_OFFSET	0x10000
+
+/*
+ * Memory initialization
+ *
+ * @param reset     Reset PHY during initialization.
+ */
+void mem_ctrl_init(int reset);
+
+ /* System Clock initialization */
+void system_clock_init(void);
+
+/*
+ * Init subsystems according to the reset status
+ *
+ * @return 0 for a normal boot, non-zero for a resume
+ */
+int do_lowlevel_init(void);
+
+void sdelay(unsigned long);
+
+enum l2_cache_params {
+	CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0),
+	CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0),
+	CACHE_DISABLE_CLEAN_EVICT = (1 << 3),
+	CACHE_DATA_RAM_SETUP = (1 << 5),
+	CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6),
+	CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6),
+	CACHE_ENABLE_HAZARD_DETECT = (1 << 7),
+	CACHE_TAG_RAM_SETUP = (1 << 9),
+	CACHE_ECC_AND_PARITY = (1 << 21),
+	CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27)
+};
+
+
+#if !defined(CONFIG_SYS_L2CACHE_OFF) && defined(CONFIG_EXYNOS5420)
+/*
+ * Configure L2CTLR to get timings that keep us from hanging/crashing.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_ctlr(void)
+{
+	uint32_t val;
+
+	mrc_l2_ctlr(val);
+
+	val |= CACHE_TAG_RAM_SETUP |
+		CACHE_DATA_RAM_SETUP |
+		CACHE_TAG_RAM_LATENCY_2_CYCLES |
+		CACHE_DATA_RAM_LATENCY_2_CYCLES;
+
+	if (proid_is_exynos5420() || proid_is_exynos5422()) {
+		val |= CACHE_ECC_AND_PARITY |
+			CACHE_TAG_RAM_LATENCY_3_CYCLES |
+			CACHE_DATA_RAM_LATENCY_3_CYCLES;
+	}
+
+	mcr_l2_ctlr(val);
+}
+
+/*
+ * Configure L2ACTLR.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_actlr(void)
+{
+	uint32_t val;
+
+	if (proid_is_exynos5420() || proid_is_exynos5422()) {
+		mrc_l2_aux_ctlr(val);
+		val |= CACHE_ENABLE_FORCE_L2_LOGIC |
+			CACHE_DISABLE_CLEAN_EVICT;
+		mcr_l2_aux_ctlr(val);
+	}
+}
+#endif