avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/arch/arm/include/asm/arch-omap5/clock.h

@@ -0,0 +1,374 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ *	Aneesh V <aneesh@ti.com>
+ *	Sricharan R <r.sricharan@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _CLOCKS_OMAP5_H_
+#define _CLOCKS_OMAP5_H_
+#include <common.h>
+#include <asm/omap_common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY		1000000
+
+/* CM_DLL_CTRL */
+#define CM_DLL_CTRL_OVERRIDE_SHIFT		0
+#define CM_DLL_CTRL_OVERRIDE_MASK		(1 << 0)
+#define CM_DLL_CTRL_NO_OVERRIDE			0
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* SGX */
+#define CLKSEL_GPU_HYD_GCLK_MASK		(1 << 25)
+#define CLKSEL_GPU_CORE_GCLK_MASK		(1 << 24)
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT	24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK		(0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT			22
+#define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT	0
+#define CLKSEL_L3_SHIFT		4
+#define CLKSEL_L4_SHIFT		8
+
+#define CLKSEL_CORE_X2_DIV_1	0
+#define CLKSEL_L3_CORE_DIV_2	1
+#define CLKSEL_L4_L3_DIV_2	1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK	1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
+
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT	0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK	1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1		0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2		1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2		1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK	1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK	4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK	8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT	8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK	(7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT	11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK		(0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO		3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO		1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
+#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK		(1 << 25)
+
+/* CM_L3INIT_SATA_CLKCTRL */
+#define SATA_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK		0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
+
+/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
+#define OPTFCLKEN_FUNC48M_CLK			(1 << 15)
+#define OPTFCLKEN_HSIC480M_P2_CLK		(1 << 14)
+#define OPTFCLKEN_HSIC480M_P1_CLK		(1 << 13)
+#define OPTFCLKEN_HSIC60M_P2_CLK		(1 << 12)
+#define OPTFCLKEN_HSIC60M_P1_CLK		(1 << 11)
+#define OPTFCLKEN_UTMI_P3_CLK			(1 << 10)
+#define OPTFCLKEN_UTMI_P2_CLK			(1 << 9)
+#define OPTFCLKEN_UTMI_P1_CLK			(1 << 8)
+#define OPTFCLKEN_HSIC480M_P3_CLK		(1 << 7)
+#define OPTFCLKEN_HSIC60M_P3_CLK		(1 << 6)
+
+/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
+#define OPTFCLKEN_USB_CH0_CLK_ENABLE	(1 << 8)
+#define OPTFCLKEN_USB_CH1_CLK_ENABLE	(1 << 9)
+#define OPTFCLKEN_USB_CH2_CLK_ENABLE	(1 << 10)
+
+/* CM_COREAON_USB_PHY_CORE_CLKCTRL */
+#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K	(1 << 8)
+
+/* CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL */
+#define L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK	(1 << 8)
+
+/* CM_L3INIT_USB_OTG_SS_CLKCTRL */
+#define OTG_SS_CLKCTRL_MODULEMODE_HW	(1 << 0)
+#define OPTFCLKEN_REFCLK960M			(1 << 8)
+
+/* CM_L3INIT_OCP2SCP1_CLKCTRL */
+#define OCP2SCP1_CLKCTRL_MODULEMODE_HW	(1 << 0)
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(3 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT	26
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 26)
+
+/* CM_WKUPAON_SCRM_CLKCTRL */
+#define OPTFCLKEN_SCRM_PER_SHIFT		9
+#define OPTFCLKEN_SCRM_PER_MASK			(1 << 9)
+#define OPTFCLKEN_SCRM_CORE_SHIFT		8
+#define OPTFCLKEN_SCRM_CORE_MASK		(1 << 8)
+
+/* CM_COREAON_IO_SRCOMP_CLKCTRL */
+#define OPTFCLKEN_SRCOMP_FCLK_SHIFT		8
+#define OPTFCLKEN_SRCOMP_FCLK_MASK		(1 << 8)
+
+/* PRM_RSTTIME */
+#define RSTTIME1_SHIFT				0
+#define RSTTIME1_MASK				(0x3ff << 0)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_IND_38_4_MHZ	6
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
+
+/* CTRL_CORE_SRCOMP_NORTH_SIDE */
+#define USB2PHY_DISCHGDET	(1 << 29)
+#define USB2PHY_AUTORESUME_EN (1 << 30)
+
+/* SMPS */
+#define SMPS_I2C_SLAVE_ADDR	0x12
+#define SMPS_REG_ADDR_12_MPU	0x23
+#define SMPS_REG_ADDR_45_IVA	0x2B
+#define SMPS_REG_ADDR_8_CORE	0x37
+
+/* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */
+/* ES1.0 settings */
+#define VDD_MPU		1040
+#define VDD_MM		1040
+#define VDD_CORE	1040
+
+#define VDD_MPU_LOW	890
+#define VDD_MM_LOW	890
+#define VDD_CORE_LOW	890
+
+/* ES2.0 settings */
+#define VDD_MPU_ES2	1060
+#define VDD_MM_ES2	1025
+#define VDD_CORE_ES2	1040
+
+#define VDD_MPU_ES2_HIGH 1250
+#define VDD_MM_ES2_OD  1120
+
+#define VDD_MPU_ES2_LOW 880
+#define VDD_MM_ES2_LOW 880
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_NOM per DM */
+#define VDD_MPU_DRA7_NOM	1150
+#define VDD_CORE_DRA7_NOM	1150
+#define VDD_EVE_DRA7_NOM	1060
+#define VDD_GPU_DRA7_NOM	1060
+#define VDD_IVA_DRA7_NOM	1060
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_OD per DM */
+#define VDD_EVE_DRA7_OD		1150
+#define VDD_GPU_DRA7_OD		1150
+#define VDD_IVA_DRA7_OD		1150
+
+/* DRA74x/75x/72x voltage settings in mv for OPP_HIGH per DM */
+#define VDD_EVE_DRA7_HIGH	1250
+#define VDD_GPU_DRA7_HIGH	1250
+#define VDD_IVA_DRA7_HIGH	1250
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE	0x4A002000
+#define DRA752_EFUSE_REGBITS	16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM	(DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD	(DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH	(DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM	(DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD	(DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH	(DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM	(DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM	(DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD	(DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH	(DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM	(DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD	(DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH	(DRA752_EFUSE_BASE + 0x1B28)
+
+/* Common voltage and Efuse register macros */
+/* DRA74x/DRA75x/DRA72x */
+#define VDD_MPU_DRA7			VDD_MPU_DRA7_NOM
+#define VDD_CORE_DRA7			VDD_CORE_DRA7_NOM
+#define VDD_EVE_DRA7			VDD_EVE_DRA7_NOM
+#define VDD_GPU_DRA7			VDD_GPU_DRA7_NOM
+#define VDD_IVA_DRA7			VDD_IVA_DRA7_NOM
+
+#define STD_FUSE_OPP_VMIN_MPU		STD_FUSE_OPP_VMIN_MPU_NOM
+#define STD_FUSE_OPP_VMIN_CORE		STD_FUSE_OPP_VMIN_CORE_NOM
+#define STD_FUSE_OPP_VMIN_DSPEVE	STD_FUSE_OPP_VMIN_DSPEVE_NOM
+#define STD_FUSE_OPP_VMIN_GPU		STD_FUSE_OPP_VMIN_GPU_NOM
+#define STD_FUSE_OPP_VMIN_IVA		STD_FUSE_OPP_VMIN_IVA_NOM
+
+/* Standard offset is 0.5v expressed in uv */
+#define PALMAS_SMPS_BASE_VOLT_UV 500000
+
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR		0x58
+#define TPS659038_REG_ADDR_SMPS12		0x23
+#define TPS659038_REG_ADDR_SMPS45		0x2B
+#define TPS659038_REG_ADDR_SMPS6		0x2F
+#define TPS659038_REG_ADDR_SMPS7		0x33
+#define TPS659038_REG_ADDR_SMPS8		0x37
+
+/* TPS65917 */
+#define TPS65917_I2C_SLAVE_ADDR		0x58
+#define TPS65917_REG_ADDR_SMPS1		0x23
+#define TPS65917_REG_ADDR_SMPS2		0x27
+#define TPS65917_REG_ADDR_SMPS3		0x2F
+
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR		0x60
+#define TPS62361_REG_ADDR_SET0		0x0
+#define TPS62361_REG_ADDR_SET1		0x1
+#define TPS62361_REG_ADDR_SET2		0x2
+#define TPS62361_REG_ADDR_SET3		0x3
+#define TPS62361_REG_ADDR_CTRL		0x4
+#define TPS62361_REG_ADDR_TEMP		0x5
+#define TPS62361_REG_ADDR_RMP_CTRL	0x6
+#define TPS62361_REG_ADDR_CHIP_ID	0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2	0x9
+
+#define TPS62361_BASE_VOLT_MV	500
+#define TPS62361_VSEL0_GPIO	7
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
+
+#define DPLL_NO_LOCK	0
+#define DPLL_LOCK	1
+
+/*
+ * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
+ * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
+ * into microsec and passing the value.
+ */
+#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC	31219
+
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#define V_OSCK			20000000	/* Clock output from T2 */
+#else
+#define V_OSCK			19200000	/* Clock output from T2 */
+#endif
+
+#define V_SCLK	V_OSCK
+
+/* CKO buffer control */
+#define CKOBUFFER_CLK_ENABLE_MASK	(1 << 28)
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK		(1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT		1
+#define AUXCLK_SRCSELECT_MASK		(3 << 1)
+#define AUXCLK_CLKDIV_SHIFT		16
+#define AUXCLK_CLKDIV_MASK		(0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK	0
+#define AUXCLK_SRCSELECT_CORE_DPLL	1
+#define AUXCLK_SRCSELECT_PER_DPLL	2
+#define AUXCLK_SRCSELECT_ALTERNATE	3
+
+#endif /* _CLOCKS_OMAP5_H_ */

u-boot/arch/arm/include/asm/arch-omap5/cpu.h

@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2006-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct gptimer {
+	u32 tidr;		/* 0x00 r */
+	u8 res1[0xc];
+	u32 tiocp_cfg;		/* 0x10 rw */
+	u8 res2[0x10];
+	u32 tisr_raw;		/* 0x24 r */
+	u32 tisr;		/* 0x28 rw */
+	u32 tier;		/* 0x2c rw */
+	u32 ticr;		/* 0x30 rw */
+	u32 twer;		/* 0x34 rw */
+	u32 tclr;		/* 0x38 rw */
+	u32 tcrr;		/* 0x3c rw */
+	u32 tldr;		/* 0x40 rw */
+	u32 ttgr;		/* 0x44 rw */
+	u32 twpc;		/* 0x48 r */
+	u32 tmar;		/* 0x4c rw */
+	u32 tcar1;		/* 0x50 r */
+	u32 tcicr;		/* 0x54 rw */
+	u32 tcar2;		/* 0x58 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+	u8 res1[0x34];
+	u32 wwps;		/* 0x34 r */
+	u8 res2[0x10];
+	u32 wspr;		/* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* I2C base */
+#define I2C_BASE1		(OMAP54XX_L4_PER_BASE + 0x70000)
+#define I2C_BASE2		(OMAP54XX_L4_PER_BASE + 0x72000)
+#define I2C_BASE3		(OMAP54XX_L4_PER_BASE + 0x60000)
+#define I2C_BASE4		(OMAP54XX_L4_PER_BASE + 0x7A000)
+#define I2C_BASE5		(OMAP54XX_L4_PER_BASE + 0x7C000)
+
+/* MUSB base */
+#define MUSB_BASE		(OMAP54XX_L4_CORE_BASE + 0xAB000)
+
+/* OMAP4 GPIO registers */
+#define OMAP_GPIO_REVISION		0x0000
+#define OMAP_GPIO_SYSCONFIG		0x0010
+#define OMAP_GPIO_SYSSTATUS		0x0114
+#define OMAP_GPIO_IRQSTATUS1		0x0118
+#define OMAP_GPIO_IRQSTATUS2		0x0128
+#define OMAP_GPIO_IRQENABLE2		0x012c
+#define OMAP_GPIO_IRQENABLE1		0x011c
+#define OMAP_GPIO_WAKE_EN		0x0120
+#define OMAP_GPIO_CTRL			0x0130
+#define OMAP_GPIO_OE			0x0134
+#define OMAP_GPIO_DATAIN		0x0138
+#define OMAP_GPIO_DATAOUT		0x013c
+#define OMAP_GPIO_LEVELDETECT0		0x0140
+#define OMAP_GPIO_LEVELDETECT1		0x0144
+#define OMAP_GPIO_RISINGDETECT		0x0148
+#define OMAP_GPIO_FALLINGDETECT		0x014c
+#define OMAP_GPIO_DEBOUNCE_EN		0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL		0x0154
+#define OMAP_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP_GPIO_SETIRQENABLE1		0x0164
+#define OMAP_GPIO_CLEARWKUENA		0x0180
+#define OMAP_GPIO_SETWKUENA		0x0184
+#define OMAP_GPIO_CLEARDATAOUT		0x0190
+#define OMAP_GPIO_SETDATAOUT		0x0194
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE		0x4AE06000
+#define PRM_DEVICE_BASE		(PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL		PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET	0x01
+#define PRM_RSTST		(PRM_DEVICE_BASE + 0x4)
+#define PRM_RSTST_WARM_RESET_MASK	0x7FEA
+
+/* DRA7XX CPSW Config space */
+#define CPSW_BASE			0x48484000
+#define CPSW_MDIO_BASE			0x48485000
+
+/* gmii_sel register defines */
+#define GMII1_SEL_MII		0x0
+#define GMII1_SEL_RMII		0x1
+#define GMII1_SEL_RGMII		0x2
+#define GMII2_SEL_MII		(GMII1_SEL_MII << 4)
+#define GMII2_SEL_RMII		(GMII1_SEL_RMII << 4)
+#define GMII2_SEL_RGMII		(GMII1_SEL_RGMII << 4)
+
+#define MII_MODE_ENABLE		(GMII1_SEL_MII | GMII2_SEL_MII)
+#define RMII_MODE_ENABLE        (GMII1_SEL_RMII | GMII2_SEL_RMII)
+#define RGMII_MODE_ENABLE	(GMII1_SEL_RGMII | GMII2_SEL_RGMII)
+
+#endif /* _CPU_H */

u-boot/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h

@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated
+ *
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _DRA7_IODELAY_H_
+#define _DRA7_IODELAY_H_
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+
+/* CONFIG_REG_0 */
+#define CFG_REG_0_OFFSET		0xC
+#define CFG_REG_ROM_READ_SHIFT		1
+#define CFG_REG_ROM_READ_MASK		(1 << 1)
+#define CFG_REG_CALIB_STRT_SHIFT	0
+#define CFG_REG_CALIB_STRT_MASK		(1 << 0)
+#define CFG_REG_CALIB_STRT		1
+#define CFG_REG_CALIB_END		0
+#define CFG_REG_ROM_READ_START		(1 << 1)
+#define CFG_REG_ROM_READ_END		(0 << 1)
+
+/* CONFIG_REG_2 */
+#define CFG_REG_2_OFFSET		0x14
+#define CFG_REG_REFCLK_PERIOD_SHIFT	0
+#define CFG_REG_REFCLK_PERIOD_MASK	(0xFFFF << 0)
+#define CFG_REG_REFCLK_PERIOD		0x2EF
+
+/* CONFIG_REG_8 */
+#define CFG_REG_8_OFFSET		0x2C
+#define CFG_IODELAY_UNLOCK_KEY		0x0000AAAA
+#define CFG_IODELAY_LOCK_KEY		0x0000AAAB
+
+/* CONFIG_REG_3/4 */
+#define CFG_REG_3_OFFSET	0x18
+#define CFG_REG_4_OFFSET	0x1C
+#define CFG_REG_DLY_CNT_SHIFT	16
+#define CFG_REG_DLY_CNT_MASK	(0xFFFF << 16)
+#define CFG_REG_REF_CNT_SHIFT	0
+#define CFG_REG_REF_CNT_MASK	(0xFFFF << 0)
+
+/* CTRL_CORE_SMA_SW_0 */
+#define CTRL_ISOLATE_SHIFT		2
+#define CTRL_ISOLATE_MASK		(1 << 2)
+#define ISOLATE_IO			1
+#define DEISOLATE_IO			0
+
+/* CTRL_CORE_SMA_SW_1 */
+#define RGMII2_ID_MODE_N_MASK		(1 << 26)
+#define RGMII1_ID_MODE_N_MASK		(1 << 25)
+
+/* PRM_IO_PMCTRL */
+#define PMCTRL_ISOCLK_OVERRIDE_SHIFT	0
+#define PMCTRL_ISOCLK_OVERRIDE_MASK	(1 << 0)
+#define PMCTRL_ISOCLK_STATUS_SHIFT	1
+#define PMCTRL_ISOCLK_STATUS_MASK	(1 << 1)
+#define PMCTRL_ISOCLK_OVERRIDE_CTRL	1
+#define PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL	0
+
+#define ERR_CALIBRATE_IODELAY		0x1
+#define ERR_DEISOLATE_IO		0x2
+#define ERR_ISOLATE_IO			0x4
+#define ERR_UPDATE_DELAY		0x8
+#define ERR_CPDE			0x3
+#define ERR_FPDE			0x5
+
+/* CFG_XXX */
+#define CFG_X_SIGNATURE_SHIFT		12
+#define CFG_X_SIGNATURE_MASK		(0x3F << 12)
+#define CFG_X_LOCK_SHIFT		10
+#define CFG_X_LOCK_MASK			(0x1 << 10)
+#define CFG_X_COARSE_DLY_SHIFT		5
+#define CFG_X_COARSE_DLY_MASK		(0x1F << 5)
+#define CFG_X_FINE_DLY_SHIFT		0
+#define CFG_X_FINE_DLY_MASK		(0x1F << 0)
+#define CFG_X_SIGNATURE			0x29
+#define CFG_X_LOCK			1
+
+void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			   struct iodelay_cfg_entry const *iodelay,
+			   int niodelays);
+int __recalibrate_iodelay_start(void);
+void __recalibrate_iodelay_end(int ret);
+
+int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array,
+		   int niodelays);
+#endif

u-boot/arch/arm/include/asm/arch-omap5/ehci.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _EHCI_H
+#define _EHCI_H
+
+#define OMAP_EHCI_BASE				(OMAP54XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE				(OMAP54XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE			(OMAP54XX_L4_CORE_BASE + 0x62000)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE		(1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP		(1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET		(1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY		(1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE		1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET		1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE	(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE		(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY		(1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL	(OMAP_UHH_SYSCONFIG_NOIDLE | \
+					OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _EHCI_H */

u-boot/arch/arm/include/asm/arch-omap5/gpio.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ *  linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef _GPIO_OMAP5_H
+#define _GPIO_OMAP5_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP_MAX_GPIO			256
+
+#define OMAP54XX_GPIO1_BASE		0x4Ae10000
+#define OMAP54XX_GPIO2_BASE		0x48055000
+#define OMAP54XX_GPIO3_BASE		0x48057000
+#define OMAP54XX_GPIO4_BASE		0x48059000
+#define OMAP54XX_GPIO5_BASE		0x4805B000
+#define OMAP54XX_GPIO6_BASE		0x4805D000
+#define OMAP54XX_GPIO7_BASE		0x48051000
+#define OMAP54XX_GPIO8_BASE		0x48053000
+
+#endif /* _GPIO_OMAP5_H */

u-boot/arch/arm/include/asm/arch-omap5/hardware.h

@@ -0,0 +1,31 @@
+/*
+ * hardware.h
+ *
+ * hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __OMAP_HARDWARE_H
+#define __OMAP_HARDWARE_H
+
+#include <asm/arch/omap.h>
+
+/*
+ * Common hardware definitions
+ */
+
+/* BCH Error Location Module */
+#define ELM_BASE			0x48078000
+
+/* GPMC Base address */
+#define GPMC_BASE			0x50000000
+
+/* EDMA3 Base address for DRA7XX and AM57XX */
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#define EDMA3_BASE			0x43300000
+#endif
+
+#endif

u-boot/arch/arm/include/asm/arch-omap5/i2c.h

@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _OMAP5_I2C_H_
+#define _OMAP5_I2C_H_
+
+#define I2C_BUS_MAX	5
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+struct i2c {
+	unsigned short revnb_lo;	/* 0x00 */
+	unsigned short res1;
+	unsigned short revnb_hi;	/* 0x04 */
+	unsigned short res2[13];
+	unsigned short sysc;		/* 0x20 */
+	unsigned short res3;
+	unsigned short irqstatus_raw;	/* 0x24 */
+	unsigned short res4;
+	unsigned short stat;		/* 0x28 */
+	unsigned short res5;
+	unsigned short ie;		/* 0x2C */
+	unsigned short res6;
+	unsigned short irqenable_clr;	/* 0x30 */
+	unsigned short res7;
+	unsigned short iv;		/* 0x34 */
+	unsigned short res8[45];
+	unsigned short syss;		/* 0x90 */
+	unsigned short res9;
+	unsigned short buf;		/* 0x94 */
+	unsigned short res10;
+	unsigned short cnt;		/* 0x98 */
+	unsigned short res11;
+	unsigned short data;		/* 0x9C */
+	unsigned short res13;
+	unsigned short res14;		/* 0xA0 */
+	unsigned short res15;
+	unsigned short con;		/* 0xA4 */
+	unsigned short res16;
+	unsigned short oa;		/* 0xA8 */
+	unsigned short res17;
+	unsigned short sa;		/* 0xAC */
+	unsigned short res18;
+	unsigned short psc;		/* 0xB0 */
+	unsigned short res19;
+	unsigned short scll;		/* 0xB4 */
+	unsigned short res20;
+	unsigned short sclh;		/* 0xB8 */
+	unsigned short res21;
+	unsigned short systest;		/* 0xBC */
+	unsigned short res22;
+	unsigned short bufstat;		/* 0xC0 */
+	unsigned short res23;
+};
+
+#endif /* _OMAP5_I2C_H_ */

u-boot/arch/arm/include/asm/arch-omap5/mem.h

@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author
+ *		Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ *		Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
+ */
+#define GPMC_SIZE_256M		0x0
+#define GPMC_SIZE_128M		0x8
+#define GPMC_SIZE_64M		0xC
+#define GPMC_SIZE_32M		0xE
+#define GPMC_SIZE_16M		0xF
+
+#define M_NAND_GPMC_CONFIG1	0x00000800
+#define M_NAND_GPMC_CONFIG2	0x001e1e00
+#define M_NAND_GPMC_CONFIG3	0x001e1e00
+#define M_NAND_GPMC_CONFIG4	0x16051807
+#define M_NAND_GPMC_CONFIG5	0x00151e1e
+#define M_NAND_GPMC_CONFIG6	0x16000f80
+#define M_NAND_GPMC_CONFIG7	0x00000008
+
+#define STNOR_GPMC_CONFIG1	0x00001000
+#define STNOR_GPMC_CONFIG2	0x001f1f00
+#define STNOR_GPMC_CONFIG3	0x001f1f01
+#define STNOR_GPMC_CONFIG4	0x1f011f01
+#define STNOR_GPMC_CONFIG5	0x001d1f1f
+#define STNOR_GPMC_CONFIG6	0x08070280
+#define STNOR_GPMC_CONFIG7	0x00000048
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS		8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG		7
+
+#endif /* endif _MEM_H_ */

u-boot/arch/arm/include/asm/arch-omap5/mmc_host_def.h

@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+#include <asm/omap_mmc.h>
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE	0x4809C100
+#define OMAP_HSMMC2_BASE	0x480B4100
+#define OMAP_HSMMC3_BASE	0x480AD100
+
+#endif /* MMC_HOST_DEF_H */

u-boot/arch/arm/include/asm/arch-omap5/mux_dra7xx.h

@@ -0,0 +1,368 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated
+ *
+ * Nishant Kamat <nskamat@ti.com>
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _MUX_DRA7XX_H_
+#define _MUX_DRA7XX_H_
+
+#include <asm/types.h>
+
+#define FSC	(1 << 19)
+#define SSC	(0 << 19)
+
+#define IEN	(1 << 18)
+#define IDIS	(0 << 18)
+
+#define PTU	(1 << 17)
+#define PTD	(0 << 17)
+#define PEN	(1 << 16)
+#define PDIS	(0 << 16)
+
+#define WKEN	(1 << 24)
+#define WKDIS	(0 << 24)
+
+#define PULL_ENA		(0 << 16)
+#define PULL_DIS		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCONTROL		(1 << 19)
+
+/* Active pin states */
+#define PIN_OUTPUT		(0 | PULL_DIS)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(0)
+#define PIN_INPUT		(INPUT_EN | PULL_DIS)
+#define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+#define M0	0
+#define M1	1
+#define M2	2
+#define M3	3
+#define M4	4
+#define M5	5
+#define M6	6
+#define M7	7
+#define M8	8
+#define M9	9
+#define M10	10
+#define M11	11
+#define M12	12
+#define M13	13
+#define M14	14
+#define M15	15
+
+#define MODE_SELECT		(1 << 8)
+#define DELAYMODE_SHIFT		4
+
+#define MANUAL_MODE	MODE_SELECT
+
+#define VIRTUAL_MODE0	(MODE_SELECT | (0x0 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE1	(MODE_SELECT | (0x1 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE2	(MODE_SELECT | (0x2 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE3	(MODE_SELECT | (0x3 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE4	(MODE_SELECT | (0x4 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE5	(MODE_SELECT | (0x5 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE6	(MODE_SELECT | (0x6 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE7	(MODE_SELECT | (0x7 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE8	(MODE_SELECT | (0x8 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE9	(MODE_SELECT | (0x9 << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE10	(MODE_SELECT | (0xa << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE11	(MODE_SELECT | (0xb << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE12	(MODE_SELECT | (0xc << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE13	(MODE_SELECT | (0xd << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE14	(MODE_SELECT | (0xe << DELAYMODE_SHIFT))
+#define VIRTUAL_MODE15	(MODE_SELECT | (0xf << DELAYMODE_SHIFT))
+
+#define SAFE_MODE	M15
+
+#define GPMC_AD0	0x000
+#define GPMC_AD1	0x004
+#define GPMC_AD2	0x008
+#define GPMC_AD3	0x00C
+#define GPMC_AD4	0x010
+#define GPMC_AD5	0x014
+#define GPMC_AD6	0x018
+#define GPMC_AD7	0x01C
+#define GPMC_AD8	0x020
+#define GPMC_AD9	0x024
+#define GPMC_AD10	0x028
+#define GPMC_AD11	0x02C
+#define GPMC_AD12	0x030
+#define GPMC_AD13	0x034
+#define GPMC_AD14	0x038
+#define GPMC_AD15	0x03C
+#define GPMC_A0		0x040
+#define GPMC_A1		0x044
+#define GPMC_A2		0x048
+#define GPMC_A3		0x04C
+#define GPMC_A4		0x050
+#define GPMC_A5		0x054
+#define GPMC_A6		0x058
+#define GPMC_A7		0x05C
+#define GPMC_A8		0x060
+#define GPMC_A9		0x064
+#define GPMC_A10	0x068
+#define GPMC_A11	0x06C
+#define GPMC_A12	0x070
+#define GPMC_A13	0x074
+#define GPMC_A14	0x078
+#define GPMC_A15	0x07C
+#define GPMC_A16	0x080
+#define GPMC_A17	0x084
+#define GPMC_A18	0x088
+#define GPMC_A19	0x08C
+#define GPMC_A20	0x090
+#define GPMC_A21	0x094
+#define GPMC_A22	0x098
+#define GPMC_A23	0x09C
+#define GPMC_A24	0x0A0
+#define GPMC_A25	0x0A4
+#define GPMC_A26	0x0A8
+#define GPMC_A27	0x0AC
+#define GPMC_CS1	0x0B0
+#define GPMC_CS0	0x0B4
+#define GPMC_CS2	0x0B8
+#define GPMC_CS3	0x0BC
+#define GPMC_CLK	0x0C0
+#define GPMC_ADVN_ALE	0x0C4
+#define GPMC_OEN_REN	0x0C8
+#define GPMC_WEN	0x0CC
+#define GPMC_BEN0	0x0D0
+#define GPMC_BEN1	0x0D4
+#define GPMC_WAIT0	0x0D8
+#define VIN1A_CLK0	0x0DC
+#define VIN1B_CLK1	0x0E0
+#define VIN1A_DE0	0x0E4
+#define VIN1A_FLD0	0x0E8
+#define VIN1A_HSYNC0	0x0EC
+#define VIN1A_VSYNC0	0x0F0
+#define VIN1A_D0	0x0F4
+#define VIN1A_D1	0x0F8
+#define VIN1A_D2	0x0FC
+#define VIN1A_D3	0x100
+#define VIN1A_D4	0x104
+#define VIN1A_D5	0x108
+#define VIN1A_D6	0x10C
+#define VIN1A_D7	0x110
+#define VIN1A_D8	0x114
+#define VIN1A_D9	0x118
+#define VIN1A_D10	0x11C
+#define VIN1A_D11	0x120
+#define VIN1A_D12	0x124
+#define VIN1A_D13	0x128
+#define VIN1A_D14	0x12C
+#define VIN1A_D15	0x130
+#define VIN1A_D16	0x134
+#define VIN1A_D17	0x138
+#define VIN1A_D18	0x13C
+#define VIN1A_D19	0x140
+#define VIN1A_D20	0x144
+#define VIN1A_D21	0x148
+#define VIN1A_D22	0x14C
+#define VIN1A_D23	0x150
+#define VIN2A_CLK0	0x154
+#define VIN2A_DE0	0x158
+#define VIN2A_FLD0	0x15C
+#define VIN2A_HSYNC0	0x160
+#define VIN2A_VSYNC0	0x164
+#define VIN2A_D0	0x168
+#define VIN2A_D1	0x16C
+#define VIN2A_D2	0x170
+#define VIN2A_D3	0x174
+#define VIN2A_D4	0x178
+#define VIN2A_D5	0x17C
+#define VIN2A_D6	0x180
+#define VIN2A_D7	0x184
+#define VIN2A_D8	0x188
+#define VIN2A_D9	0x18C
+#define VIN2A_D10	0x190
+#define VIN2A_D11	0x194
+#define VIN2A_D12	0x198
+#define VIN2A_D13	0x19C
+#define VIN2A_D14	0x1A0
+#define VIN2A_D15	0x1A4
+#define VIN2A_D16	0x1A8
+#define VIN2A_D17	0x1AC
+#define VIN2A_D18	0x1B0
+#define VIN2A_D19	0x1B4
+#define VIN2A_D20	0x1B8
+#define VIN2A_D21	0x1BC
+#define VIN2A_D22	0x1C0
+#define VIN2A_D23	0x1C4
+#define VOUT1_CLK	0x1C8
+#define VOUT1_DE	0x1CC
+#define VOUT1_FLD	0x1D0
+#define VOUT1_HSYNC	0x1D4
+#define VOUT1_VSYNC	0x1D8
+#define VOUT1_D0	0x1DC
+#define VOUT1_D1	0x1E0
+#define VOUT1_D2	0x1E4
+#define VOUT1_D3	0x1E8
+#define VOUT1_D4	0x1EC
+#define VOUT1_D5	0x1F0
+#define VOUT1_D6	0x1F4
+#define VOUT1_D7	0x1F8
+#define VOUT1_D8	0x1FC
+#define VOUT1_D9	0x200
+#define VOUT1_D10	0x204
+#define VOUT1_D11	0x208
+#define VOUT1_D12	0x20C
+#define VOUT1_D13	0x210
+#define VOUT1_D14	0x214
+#define VOUT1_D15	0x218
+#define VOUT1_D16	0x21C
+#define VOUT1_D17	0x220
+#define VOUT1_D18	0x224
+#define VOUT1_D19	0x228
+#define VOUT1_D20	0x22C
+#define VOUT1_D21	0x230
+#define VOUT1_D22	0x234
+#define VOUT1_D23	0x238
+#define MDIO_MCLK	0x23C
+#define MDIO_D		0x240
+#define RMII_MHZ_50_CLK	0x244
+#define UART3_RXD	0x248
+#define UART3_TXD	0x24C
+#define RGMII0_TXC	0x250
+#define RGMII0_TXCTL	0x254
+#define RGMII0_TXD3	0x258
+#define RGMII0_TXD2	0x25C
+#define RGMII0_TXD1	0x260
+#define RGMII0_TXD0	0x264
+#define RGMII0_RXC	0x268
+#define RGMII0_RXCTL	0x26C
+#define RGMII0_RXD3	0x270
+#define RGMII0_RXD2	0x274
+#define RGMII0_RXD1	0x278
+#define RGMII0_RXD0	0x27C
+#define USB1_DRVVBUS	0x280
+#define USB2_DRVVBUS	0x284
+#define GPIO6_14	0x288
+#define GPIO6_15	0x28C
+#define GPIO6_16	0x290
+#define XREF_CLK0	0x294
+#define XREF_CLK1	0x298
+#define XREF_CLK2	0x29C
+#define XREF_CLK3	0x2A0
+#define MCASP1_ACLKX	0x2A4
+#define MCASP1_FSX	0x2A8
+#define MCASP1_ACLKR	0x2AC
+#define MCASP1_FSR	0x2B0
+#define MCASP1_AXR0	0x2B4
+#define MCASP1_AXR1	0x2B8
+#define MCASP1_AXR2	0x2BC
+#define MCASP1_AXR3	0x2C0
+#define MCASP1_AXR4	0x2C4
+#define MCASP1_AXR5	0x2C8
+#define MCASP1_AXR6	0x2CC
+#define MCASP1_AXR7	0x2D0
+#define MCASP1_AXR8	0x2D4
+#define MCASP1_AXR9	0x2D8
+#define MCASP1_AXR10	0x2DC
+#define MCASP1_AXR11	0x2E0
+#define MCASP1_AXR12	0x2E4
+#define MCASP1_AXR13	0x2E8
+#define MCASP1_AXR14	0x2EC
+#define MCASP1_AXR15	0x2F0
+#define MCASP2_ACLKX	0x2F4
+#define MCASP2_FSX	0x2F8
+#define MCASP2_ACLKR	0x2FC
+#define MCASP2_FSR	0x300
+#define MCASP2_AXR0	0x304
+#define MCASP2_AXR1	0x308
+#define MCASP2_AXR2	0x30C
+#define MCASP2_AXR3	0x310
+#define MCASP2_AXR4	0x314
+#define MCASP2_AXR5	0x318
+#define MCASP2_AXR6	0x31C
+#define MCASP2_AXR7	0x320
+#define MCASP3_ACLKX	0x324
+#define MCASP3_FSX	0x328
+#define MCASP3_AXR0	0x32C
+#define MCASP3_AXR1	0x330
+#define MCASP4_ACLKX	0x334
+#define MCASP4_FSX	0x338
+#define MCASP4_AXR0	0x33C
+#define MCASP4_AXR1	0x340
+#define MCASP5_ACLKX	0x344
+#define MCASP5_FSX	0x348
+#define MCASP5_AXR0	0x34C
+#define MCASP5_AXR1	0x350
+#define MMC1_CLK	0x354
+#define MMC1_CMD	0x358
+#define MMC1_DAT0	0x35C
+#define MMC1_DAT1	0x360
+#define MMC1_DAT2	0x364
+#define MMC1_DAT3	0x368
+#define MMC1_SDCD	0x36C
+#define MMC1_SDWP	0x370
+#define GPIO6_10	0x374
+#define GPIO6_11	0x378
+#define MMC3_CLK	0x37C
+#define MMC3_CMD	0x380
+#define MMC3_DAT0	0x384
+#define MMC3_DAT1	0x388
+#define MMC3_DAT2	0x38C
+#define MMC3_DAT3	0x390
+#define MMC3_DAT4	0x394
+#define MMC3_DAT5	0x398
+#define MMC3_DAT6	0x39C
+#define MMC3_DAT7	0x3A0
+#define SPI1_SCLK	0x3A4
+#define SPI1_D1		0x3A8
+#define SPI1_D0		0x3AC
+#define SPI1_CS0	0x3B0
+#define SPI1_CS1	0x3B4
+#define SPI1_CS2	0x3B8
+#define SPI1_CS3	0x3BC
+#define SPI2_SCLK	0x3C0
+#define SPI2_D1		0x3C4
+#define SPI2_D0		0x3C8
+#define SPI2_CS0	0x3CC
+#define DCAN1_TX	0x3D0
+#define DCAN1_RX	0x3D4
+#define DCAN2_TX	0x3D8
+#define DCAN2_RX	0x3DC
+#define UART1_RXD	0x3E0
+#define UART1_TXD	0x3E4
+#define UART1_CTSN	0x3E8
+#define UART1_RTSN	0x3EC
+#define UART2_RXD	0x3F0
+#define UART2_TXD	0x3F4
+#define UART2_CTSN	0x3F8
+#define UART2_RTSN	0x3FC
+#define I2C1_SDA	0x400
+#define I2C1_SCL	0x404
+#define I2C2_SDA	0x408
+#define I2C2_SCL	0x40C
+#define I2C3_SDA	0x410
+#define I2C3_SCL	0x414
+#define WAKEUP0		0x418
+#define WAKEUP1		0x41C
+#define WAKEUP2		0x420
+#define WAKEUP3		0x424
+#define ON_OFF		0x428
+#define RTC_PORZ	0x42C
+#define TMS		0x430
+#define TDI		0x434
+#define TDO		0x438
+#define TCLK		0x43C
+#define TRSTN		0x440
+#define RTCK		0x444
+#define EMU0		0x448
+#define EMU1		0x44C
+#define EMU2		0x450
+#define EMU3		0x454
+#define EMU4		0x458
+#define RESETN		0x45C
+#define NMIN		0x460
+#define RSTOUTN		0x464
+
+#endif /* _MUX_DRA7XX_H_ */

u-boot/arch/arm/include/asm/arch-omap5/mux_omap5.h

@@ -0,0 +1,318 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff		<r-woodruff2@ti.com>
+ * Aneesh V			<aneesh@ti.com>
+ * Balaji Krishnamoorthy	<balajitk@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _MUX_OMAP5_H_
+#define _MUX_OMAP5_H_
+
+#include <asm/types.h>
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD          (1 << 12)
+#define OFF_PU          (3 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (2 << 10)
+#define OFF_IN          (1 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (1 << 9)
+#else
+#define OFF_PD          (0 << 12)
+#define OFF_PU          (0 << 12)
+#define OFF_OUT_PTD     (0 << 10)
+#define OFF_OUT_PTU     (0 << 10)
+#define OFF_IN          (0 << 10)
+#define OFF_OUT         (0 << 10)
+#define OFF_EN          (0 << 9)
+#endif
+
+#define IEN             (1 << 8)
+#define IDIS            (0 << 8)
+#define PTU             (3 << 3)
+#define PTD             (1 << 3)
+#define EN              (1 << 3)
+#define DIS             (0 << 3)
+
+#define M0              0
+#define M1              1
+#define M2              2
+#define M3              3
+#define M4              4
+#define M5              5
+#define M6              6
+#define M7              7
+
+#define SAFE_MODE	M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD       (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU       (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD      (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU      (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD       0
+#define OFF_IN_PU       0
+#define OFF_OUT_PD      0
+#define OFF_OUT_PU      0
+#endif
+
+#define CORE_REVISION		0x0000
+#define CORE_HWINFO		0x0004
+#define CORE_SYSCONFIG		0x0010
+#define EMMC_CLK		0x0040
+#define EMMC_CMD		0x0042
+#define EMMC_DATA0		0x0044
+#define EMMC_DATA1		0x0046
+#define EMMC_DATA2		0x0048
+#define EMMC_DATA3		0x004a
+#define EMMC_DATA4		0x004c
+#define EMMC_DATA5		0x004e
+#define EMMC_DATA6		0x0050
+#define EMMC_DATA7		0x0052
+#define C2C_CLKOUT0		0x0054
+#define C2C_CLKOUT1		0x0056
+#define C2C_CLKIN0		0x0058
+#define C2C_CLKIN1		0x005a
+#define C2C_DATAIN0		0x005c
+#define C2C_DATAIN1		0x005e
+#define C2C_DATAIN2		0x0060
+#define C2C_DATAIN3		0x0062
+#define C2C_DATAIN4		0x0064
+#define C2C_DATAIN5		0x0066
+#define C2C_DATAIN6		0x0068
+#define C2C_DATAIN7		0x006a
+#define C2C_DATAOUT0		0x006c
+#define C2C_DATAOUT1		0x006e
+#define C2C_DATAOUT2		0x0070
+#define C2C_DATAOUT3		0x0072
+#define C2C_DATAOUT4		0x0074
+#define C2C_DATAOUT5		0x0076
+#define C2C_DATAOUT6		0x0078
+#define C2C_DATAOUT7		0x007a
+#define C2C_DATA8		0x007c
+#define C2C_DATA9		0x007e
+#define C2C_DATA10		0x0080
+#define C2C_DATA11		0x0082
+#define C2C_DATA12		0x0084
+#define C2C_DATA13		0x0086
+#define C2C_DATA14		0x0088
+#define C2C_DATA15		0x008a
+#define LLIA_WAKEREQOUT		0x008c
+#define LLIB_WAKEREQOUT		0x008e
+#define HSI1_ACREADY		0x0090
+#define HSI1_CAREADY		0x0092
+#define HSI1_ACWAKE		0x0094
+#define HSI1_CAWAKE		0x0096
+#define HSI1_ACFLAG		0x0098
+#define HSI1_ACDATA		0x009a
+#define HSI1_CAFLAG		0x009c
+#define HSI1_CADATA		0x009e
+#define UART1_TX		0x00a0
+#define UART1_CTS		0x00a2
+#define UART1_RX		0x00a4
+#define UART1_RTS		0x00a6
+#define HSI2_CAREADY		0x00a8
+#define HSI2_ACREADY		0x00aa
+#define HSI2_CAWAKE		0x00ac
+#define HSI2_ACWAKE		0x00ae
+#define HSI2_CAFLAG		0x00b0
+#define HSI2_CADATA		0x00b2
+#define HSI2_ACFLAG		0x00b4
+#define HSI2_ACDATA		0x00b6
+#define UART2_RTS		0x00b8
+#define UART2_CTS		0x00ba
+#define UART2_RX		0x00bc
+#define UART2_TX		0x00be
+#define USBB1_HSIC_STROBE	0x00c0
+#define USBB1_HSIC_DATA		0x00c2
+#define USBB2_HSIC_STROBE	0x00c4
+#define USBB2_HSIC_DATA		0x00c6
+#define TIMER10_PWM_EVT		0x00c8
+#define DSIPORTA_TE0		0x00ca
+#define DSIPORTA_LANE0X		0x00cc
+#define DSIPORTA_LANE0Y		0x00ce
+#define DSIPORTA_LANE1X		0x00d0
+#define DSIPORTA_LANE1Y		0x00d2
+#define DSIPORTA_LANE2X		0x00d4
+#define DSIPORTA_LANE2Y		0x00d6
+#define DSIPORTA_LANE3X		0x00d8
+#define DSIPORTA_LANE3Y		0x00da
+#define DSIPORTA_LANE4X		0x00dc
+#define DSIPORTA_LANE4Y		0x00de
+#define DSIPORTC_LANE0X		0x00e0
+#define DSIPORTC_LANE0Y		0x00e2
+#define DSIPORTC_LANE1X		0x00e4
+#define DSIPORTC_LANE1Y		0x00e6
+#define DSIPORTC_LANE2X		0x00e8
+#define DSIPORTC_LANE2Y		0x00ea
+#define DSIPORTC_LANE3X		0x00ec
+#define DSIPORTC_LANE3Y		0x00ee
+#define DSIPORTC_LANE4X		0x00f0
+#define DSIPORTC_LANE4Y		0x00f2
+#define DSIPORTC_TE0		0x00f4
+#define TIMER9_PWM_EVT		0x00f6
+#define I2C4_SCL		0x00f8
+#define I2C4_SDA		0x00fa
+#define MCSPI2_CLK		0x00fc
+#define MCSPI2_SIMO		0x00fe
+#define MCSPI2_SOMI		0x0100
+#define MCSPI2_CS0		0x0102
+#define RFBI_DATA15		0x0104
+#define RFBI_DATA14		0x0106
+#define RFBI_DATA13		0x0108
+#define RFBI_DATA12		0x010a
+#define RFBI_DATA11		0x010c
+#define RFBI_DATA10		0x010e
+#define RFBI_DATA9		0x0110
+#define RFBI_DATA8		0x0112
+#define RFBI_DATA7		0x0114
+#define RFBI_DATA6		0x0116
+#define RFBI_DATA5		0x0118
+#define RFBI_DATA4		0x011a
+#define RFBI_DATA3		0x011c
+#define RFBI_DATA2		0x011e
+#define RFBI_DATA1		0x0120
+#define RFBI_DATA0		0x0122
+#define RFBI_WE			0x0124
+#define RFBI_CS0		0x0126
+#define RFBI_A0			0x0128
+#define RFBI_RE			0x012a
+#define RFBI_HSYNC0		0x012c
+#define RFBI_TE_VSYNC0		0x012e
+#define GPIO6_182		0x0130
+#define GPIO6_183		0x0132
+#define GPIO6_184		0x0134
+#define GPIO6_185		0x0136
+#define GPIO6_186		0x0138
+#define GPIO6_187		0x013a
+#define HDMI_CEC		0x013c
+#define HDMI_HPD		0x013e
+#define HDMI_DDC_SCL		0x0140
+#define HDMI_DDC_SDA		0x0142
+#define CSIPORTC_LANE0X		0x0144
+#define CSIPORTC_LANE0Y		0x0146
+#define CSIPORTC_LANE1X		0x0148
+#define CSIPORTC_LANE1Y		0x014a
+#define CSIPORTB_LANE0X		0x014c
+#define CSIPORTB_LANE0Y		0x014e
+#define CSIPORTB_LANE1X		0x0150
+#define CSIPORTB_LANE1Y		0x0152
+#define CSIPORTB_LANE2X		0x0154
+#define CSIPORTB_LANE2Y		0x0156
+#define CSIPORTA_LANE0X		0x0158
+#define CSIPORTA_LANE0Y		0x015a
+#define CSIPORTA_LANE1X		0x015c
+#define CSIPORTA_LANE1Y		0x015e
+#define CSIPORTA_LANE2X		0x0160
+#define CSIPORTA_LANE2Y		0x0162
+#define CSIPORTA_LANE3X		0x0164
+#define CSIPORTA_LANE3Y		0x0166
+#define CSIPORTA_LANE4X		0x0168
+#define CSIPORTA_LANE4Y		0x016a
+#define CAM_SHUTTER		0x016c
+#define CAM_STROBE		0x016e
+#define CAM_GLOBALRESET		0x0170
+#define TIMER11_PWM_EVT		0x0172
+#define TIMER5_PWM_EVT		0x0174
+#define TIMER6_PWM_EVT		0x0176
+#define TIMER8_PWM_EVT		0x0178
+#define I2C3_SCL		0x017a
+#define I2C3_SDA		0x017c
+#define GPIO8_233		0x017e
+#define GPIO8_234		0x0180
+#define ABE_CLKS		0x0182
+#define ABEDMIC_DIN1		0x0184
+#define ABEDMIC_DIN2		0x0186
+#define ABEDMIC_DIN3		0x0188
+#define ABEDMIC_CLK1		0x018a
+#define ABEDMIC_CLK2		0x018c
+#define ABEDMIC_CLK3		0x018e
+#define ABESLIMBUS1_CLOCK	0x0190
+#define ABESLIMBUS1_DATA	0x0192
+#define ABEMCBSP2_DR		0x0194
+#define ABEMCBSP2_DX		0x0196
+#define ABEMCBSP2_FSX		0x0198
+#define ABEMCBSP2_CLKX		0x019a
+#define ABEMCPDM_UL_DATA	0x019c
+#define ABEMCPDM_DL_DATA	0x019e
+#define ABEMCPDM_FRAME		0x01a0
+#define ABEMCPDM_LB_CLK		0x01a2
+#define WLSDIO_CLK		0x01a4
+#define WLSDIO_CMD		0x01a6
+#define WLSDIO_DATA0		0x01a8
+#define WLSDIO_DATA1		0x01aa
+#define WLSDIO_DATA2		0x01ac
+#define WLSDIO_DATA3		0x01ae
+#define UART5_RX		0x01b0
+#define UART5_TX		0x01b2
+#define UART5_CTS		0x01b4
+#define UART5_RTS		0x01b6
+#define I2C2_SCL		0x01b8
+#define I2C2_SDA		0x01ba
+#define MCSPI1_CLK		0x01bc
+#define MCSPI1_SOMI		0x01be
+#define MCSPI1_SIMO		0x01c0
+#define MCSPI1_CS0		0x01c2
+#define MCSPI1_CS1		0x01c4
+#define I2C5_SCL		0x01c6
+#define I2C5_SDA		0x01c8
+#define PERSLIMBUS2_CLOCK	0x01ca
+#define PERSLIMBUS2_DATA	0x01cc
+#define UART6_TX		0x01ce
+#define UART6_RX		0x01d0
+#define UART6_CTS		0x01d2
+#define UART6_RTS		0x01d4
+#define UART3_CTS_RCTX		0x01d6
+#define UART3_RTS_IRSD		0x01d8
+#define UART3_TX_IRTX		0x01da
+#define UART3_RX_IRRX		0x01dc
+#define USBB3_HSIC_STROBE	0x01de
+#define USBB3_HSIC_DATA		0x01e0
+#define SDCARD_CLK		0x01e2
+#define SDCARD_CMD		0x01e4
+#define SDCARD_DATA2		0x01e6
+#define SDCARD_DATA3		0x01e8
+#define SDCARD_DATA0		0x01ea
+#define SDCARD_DATA1		0x01ec
+#define USBD0_HS_DP		0x01ee
+#define USBD0_HS_DM		0x01f0
+#define I2C1_PMIC_SCL		0x01f2
+#define I2C1_PMIC_SDA		0x01f4
+#define USBD0_SS_RX		0x01f6
+
+#define LLIA_WAKEREQIN		0x0040
+#define LLIB_WAKEREQIN		0x0042
+#define DRM_EMU0		0x0044
+#define DRM_EMU1		0x0046
+#define JTAG_NTRST		0x0048
+#define JTAG_TCK		0x004a
+#define JTAG_RTCK		0x004c
+#define JTAG_TMSC		0x004e
+#define JTAG_TDI		0x0050
+#define JTAG_TDO		0x0052
+#define SYS_32K			0x0054
+#define FREF_CLK_IOREQ		0x0056
+#define FREF_CLK0_OUT		0x0058
+#define FREF_CLK1_OUT		0x005a
+#define FREF_CLK2_OUT		0x005c
+#define FREF_CLK2_REQ		0x005e
+#define FREF_CLK1_REQ		0x0060
+#define SYS_NRESPWRON		0x0062
+#define SYS_NRESWARM		0x0064
+#define SYS_PWR_REQ		0x0066
+#define SYS_NIRQ1		0x0068
+#define SYS_NIRQ2		0x006a
+#define SR_PMIC_SCL		0x006c
+#define SR_PMIC_SDA		0x006e
+#define SYS_BOOT0		0x0070
+#define SYS_BOOT1		0x0072
+#define SYS_BOOT2		0x0074
+#define SYS_BOOT3		0x0076
+#define SYS_BOOT4		0x0078
+#define SYS_BOOT5		0x007a
+
+#endif /* _MUX_OMAP5_H_ */

u-boot/arch/arm/include/asm/arch-omap5/omap.h

@@ -0,0 +1,264 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ *	Aneesh V <aneesh@ti.com>
+ *	Sricharan R <r.sricharan@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _OMAP5_H_
+#define _OMAP5_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP54XX_L4_CORE_BASE	0x4A000000
+#define OMAP54XX_L4_WKUP_BASE	0x4Ae00000
+#define OMAP54XX_L4_PER_BASE	0x48000000
+
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE	0x4A002204
+#define CONTROL_WKUP_ID_CODE	0x4AE0C204
+
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#define CONTROL_ID_CODE		CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
+#endif
+
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#define DRA7_USB_OTG_SS1_BASE		0x48890000
+#define DRA7_USB_OTG_SS1_GLUE_BASE	0x48880000
+#define DRA7_USB3_PHY1_PLL_CTRL		0x4A084C00
+#define DRA7_USB3_PHY1_POWER		0x4A002370
+#define DRA7_USB2_PHY1_POWER		0x4A002300
+
+#define DRA7_USB_OTG_SS2_BASE		0x488D0000
+#define DRA7_USB_OTG_SS2_GLUE_BASE	0x488C0000
+#define DRA7_USB2_PHY2_POWER		0x4A002E74
+#else
+#define OMAP5XX_USB_OTG_SS_BASE		0x4A030000
+#define OMAP5XX_USB_OTG_SS_GLUE_BASE	0x4A020000
+#define OMAP5XX_USB3_PHY_PLL_CTRL	0x4A084C00
+#define OMAP5XX_USB3_PHY_POWER		0x4A002370
+#define OMAP5XX_USB2_PHY_POWER		0x4A002300
+#endif
+
+/* To be verified */
+#define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
+#define OMAP5430_CONTROL_ID_CODE_ES2_0          0x1B94202F
+#define OMAP5432_CONTROL_ID_CODE_ES1_0		0x0B99802F
+#define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
+#define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
+#define DRA752_CONTROL_ID_CODE_ES1_1		0x1B99002F
+#define DRA752_CONTROL_ID_CODE_ES2_0		0x2B99002F
+#define DRA722_CONTROL_ID_CODE_ES1_0		0x0B9BC02F
+#define DRA722_CONTROL_ID_CODE_ES2_0		0x1B9BC02F
+
+/* UART */
+#define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE		(OMAP54XX_L4_PER_BASE + 0x20000)
+#define UART4_BASE		(OMAP54XX_L4_PER_BASE + 0x6e000)
+
+/* General Purpose Timers */
+#define GPT1_BASE		(OMAP54XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE		(OMAP54XX_L4_PER_BASE  + 0x32000)
+#define GPT3_BASE		(OMAP54XX_L4_PER_BASE  + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE		(OMAP54XX_L4_WKUP_BASE + 0x14000)
+
+/* QSPI */
+#define QSPI_BASE		0x4B300000
+
+/* SATA */
+#define DWC_AHSATA_BASE		0x4A140000
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* GP Timer */
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* Control Module */
+#define LDOSRAM_ACTMODE_VSET_IN_MASK	(0x1F << 5)
+#define LDOSRAM_VOLT_CTRL_OVERRIDE	0x0401040f
+#define CONTROL_EFUSE_1_OVERRIDE	0x1C4D0110
+#define CONTROL_EFUSE_2_OVERRIDE	0x00084000
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN	0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER	0x9E9E9E9E
+#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN	0x7C7C7C7C
+#define LPDDR2IO_GR10_WD_MASK				(3 << 17)
+#define CONTROL_LPDDR2IO_3_VAL		0xA0888C00
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
+
+#define SDCARD_BIAS_PWRDNZ				(1 << 27)
+#define SDCARD_PWRDNZ					(1 << 26)
+#define SDCARD_BIAS_HIZ_MODE				(1 << 25)
+#define SDCARD_PBIASLITE_VMODE				(1 << 21)
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;	/* 0x10 */
+};
+
+#define DEVICE_TYPE_SHIFT 0x6
+#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
+#define DEVICE_GP 0x3
+
+/* Output impedance control */
+#define ds_120_ohm	0x0
+#define ds_60_ohm	0x1
+#define ds_45_ohm	0x2
+#define ds_30_ohm	0x3
+#define ds_mask		0x3
+
+/* Slew rate control */
+#define sc_slow		0x0
+#define sc_medium	0x1
+#define sc_fast		0x2
+#define sc_na		0x3
+#define sc_mask		0x3
+
+/* Target capacitance control */
+#define lb_5_12_pf	0x0
+#define lb_12_25_pf	0x1
+#define lb_25_50_pf	0x2
+#define lb_50_80_pf	0x3
+#define lb_mask		0x3
+
+#define usb_i_mask	0x7
+
+#define DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN   0x80828082
+#define DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN 0x82828200
+#define DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL 0x8421
+#define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084
+#define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
+
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL	0x7C7C7C6C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL	0x64646464
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE				0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE				0xBC6318DC
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE				0x0
+
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64646464
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xBC6318DC
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
+
+#define EFUSE_1 0x45145100
+#define EFUSE_2 0x45145100
+#define EFUSE_3 0x45145100
+#define EFUSE_4 0x45145100
+#endif /* __ASSEMBLY__ */
+
+/*
+ * In all cases, the TRM defines the RAM Memory Map for the processor
+ * and indicates the area for the downloaded image.  We use all of that
+ * space for download and once up and running may use other parts of the
+ * map for our needs.  We set a scratch space that is at the end of the
+ * OMAP5 download area, but within the DRA7xx download area (as it is
+ * much larger) and do not, at this time, make use of the additional
+ * space.
+ */
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
+#else
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40320000	/* Not inclusive */
+#endif
+#define SRAM_SCRATCH_SPACE_ADDR	0x4031E000
+
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE	0x4031F000
+
+/* CONTROL_SRCOMP_XXX_SIDE */
+#define OVERRIDE_XS_SHIFT		30
+#define OVERRIDE_XS_MASK		(1 << 30)
+#define SRCODE_READ_XS_SHIFT		12
+#define SRCODE_READ_XS_MASK		(0xff << 12)
+#define PWRDWN_XS_SHIFT			11
+#define PWRDWN_XS_MASK			(1 << 11)
+#define DIVIDE_FACTOR_XS_SHIFT		4
+#define DIVIDE_FACTOR_XS_MASK		(0x7f << 4)
+#define MULTIPLY_FACTOR_XS_SHIFT	1
+#define MULTIPLY_FACTOR_XS_MASK		(0x7 << 1)
+#define SRCODE_OVERRIDE_SEL_XS_SHIFT	0
+#define SRCODE_OVERRIDE_SEL_XS_MASK	(1 << 0)
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK		(0x1 << 7)
+#define OMAP_ABB_MM_TXDONE_MASK			(0x1 << 31)
+#define OMAP_ABB_IVA_TXDONE_MASK		(0x1 << 30)
+#define OMAP_ABB_EVE_TXDONE_MASK		(0x1 << 29)
+#define OMAP_ABB_GPU_TXDONE_MASK		(0x1 << 28)
+
+/* ABB efuse masks */
+#define OMAP5_ABB_FUSE_VSET_MASK		(0x1F << 24)
+#define OMAP5_ABB_FUSE_ENABLE_MASK		(0x1 << 29)
+#define DRA7_ABB_FUSE_VSET_MASK			(0x1F << 20)
+#define DRA7_ABB_FUSE_ENABLE_MASK		(0x1 << 25)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
+
+#ifndef __ASSEMBLY__
+struct srcomp_params {
+	s8 divide_factor;
+	s8 multiply_factor;
+};
+
+struct ctrl_ioregs {
+	u32 ctrl_ddrch;
+	u32 ctrl_lpddr2ch;
+	u32 ctrl_ddr3ch;
+	u32 ctrl_ddrio_0;
+	u32 ctrl_ddrio_1;
+	u32 ctrl_ddrio_2;
+	u32 ctrl_emif_sdram_config_ext;
+	u32 ctrl_emif_sdram_config_ext_final;
+	u32 ctrl_ddr_ctrl_ext_0;
+};
+
+void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits);
+
+#endif /* __ASSEMBLY__ */
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int boot_message;
+	unsigned int boot_device_descriptor;
+	unsigned char boot_device;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+};
+#endif
+
+#endif

u-boot/arch/arm/include/asm/arch-omap5/sata.h

@@ -0,0 +1,39 @@
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE		(OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG			0x00
+#define TI_SATA_CDRLOCK				0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0		(1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK		(0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK		(0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE			0x0
+#define TI_SATA_STANDBY_NO			(0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE		(0x3 << 4)
+#define TI_SATA_STANDBY_SMART			(0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE			0x0
+#define TI_SATA_IDLE_NO				(0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE			(0x3 << 2)
+#define TI_SATA_IDLE_SMART			(0x2 << 2)
+
+#endif /* _TI_SATA_H */

u-boot/arch/arm/include/asm/arch-omap5/spl.h

@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_NONE	0x00
+#define BOOT_DEVICE_XIP		0x01
+#define BOOT_DEVICE_XIPWAIT	0x02
+#define BOOT_DEVICE_NAND	0x03
+#define BOOT_DEVICE_ONENAND	0x04
+#define BOOT_DEVICE_MMC1	0x05
+#define BOOT_DEVICE_MMC2	0x06
+#define BOOT_DEVICE_MMC2_2	0x07
+#define BOOT_DEVICE_SATA	0x09
+#define BOOT_DEVICE_SPI		0x0A
+#define BOOT_DEVICE_QSPI_1	0x0A
+#define BOOT_DEVICE_QSPI_4	0x0B
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_USB		0x45
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
+#endif

u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h

@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/omap_common.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/arch/clock.h>
+#include <asm/ti-common/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Structure for Iodelay configuration registers.
+ * Theoretical max for g_delay is 21560 ps.
+ * Theoretical max for a_delay is 1/3rd of g_delay max.
+ * So using u16 for both a/g_delay.
+ */
+struct iodelay_cfg_entry {
+	u16 offset;
+	u16 a_delay;
+	u16 g_delay;
+};
+
+struct pad_conf_entry {
+	u32 offset;
+	u32 val;
+};
+
+struct omap_sysinfo {
+	char *board_string;
+};
+extern const struct omap_sysinfo sysinfo;
+
+void gpmc_init(void);
+void watchdog_init(void);
+u32 get_device_type(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs(void);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void setup_early_clocks(void);
+void prcm_init(void);
+void do_board_detect(void);
+void vcores_init(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap5_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void save_omap_boot_params(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+void sri2c_init(void);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void get_ioregs(const struct ctrl_ioregs **regs);
+void srcomp_enable(void);
+void setup_warmreset_time(void);
+
+static inline u32 div_round_up(u32 num, u32 den)
+{
+	return (num + den - 1)/den;
+}
+
+static inline u32 usec_to_32k(u32 usec)
+{
+	return div_round_up(32768 * usec, 1000000);
+}
+
+#define OMAP5_SERVICE_L2ACTLR_SET    0x104
+#define OMAP5_SERVICE_ACR_SET        0x107
+
+#endif