avionic design with actual uboot and tooling

submodule of avionic design uboot bootloader and with included tools to
get you started , read readme.md and readme-tk1-loader.md

u-boot/arch/arm/cpu/arm926ejs/lpc32xx/clk.c

@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/io.h>
+
+static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
+
+unsigned int get_sys_clk_rate(void)
+{
+	if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
+		return RTC_CLK_FREQUENCY * 397;
+	else
+		return OSC_CLK_FREQUENCY;
+}
+
+unsigned int get_hclk_pll_rate(void)
+{
+	unsigned long long fin, fref, fcco, fout;
+	u32 val, m_div, n_div, p_div;
+
+	/*
+	 * Valid frequency ranges:
+	 *     1 * 10^6 <=  Fin <=  20 * 10^6
+	 *     1 * 10^6 <= Fref <=  27 * 10^6
+	 *   156 * 10^6 <= Fcco <= 320 * 10^6
+	 */
+
+	fref = fin = get_sys_clk_rate();
+	if (fin > 20000000ULL || fin < 1000000ULL)
+		return 0;
+
+	val = readl(&clk->hclkpll_ctrl);
+	m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
+	n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
+	if (val & CLK_HCLK_PLL_DIRECT)
+		p_div = 0;
+	else
+		p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
+	p_div = 1 << p_div;
+
+	if (val & CLK_HCLK_PLL_BYPASS) {
+		do_div(fin, p_div);
+		return fin;
+	}
+
+	do_div(fref, n_div);
+	if (fref > 27000000ULL || fref < 1000000ULL)
+		return 0;
+
+	fcco = fref * m_div;
+	fout = fcco;
+	if (val & CLK_HCLK_PLL_FEEDBACK)
+		fcco *= p_div;
+	else
+		do_div(fout, p_div);
+
+	if (fcco > 320000000ULL || fcco < 156000000ULL)
+		return 0;
+
+	return fout;
+}
+
+unsigned int get_hclk_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
+
+	return 1 << val;
+}
+
+unsigned int get_hclk_clk_rate(void)
+{
+	return get_hclk_pll_rate() / get_hclk_clk_div();
+}
+
+unsigned int get_periph_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
+
+	return (val >> 2) + 1;
+}
+
+unsigned int get_periph_clk_rate(void)
+{
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	return get_hclk_pll_rate() / get_periph_clk_div();
+}
+
+unsigned int get_sdram_clk_rate(void)
+{
+	unsigned int src_clk;
+
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	src_clk = get_hclk_pll_rate();
+
+	if (readl(&clk->sdramclk_ctrl) & CLK_SDRAM_DDR_SEL) {
+		/* using DDR */
+		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_DDRAM_MASK) {
+		case CLK_HCLK_DDRAM_HALF:
+			return src_clk/2;
+		case CLK_HCLK_DDRAM_NOMINAL:
+			return src_clk;
+		default:
+			return 0;
+		}
+	} else {
+		/* using SDR */
+		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK) {
+		case CLK_HCLK_ARM_PLL_DIV_4:
+			return src_clk/4;
+		case CLK_HCLK_ARM_PLL_DIV_2:
+			return src_clk/2;
+		case CLK_HCLK_ARM_PLL_DIV_1:
+			return src_clk;
+		default:
+			return 0;
+		}
+	}
+}
+
+int get_serial_clock(void)
+{
+	return get_periph_clk_rate();
+}